Built-In TEMP Electrical Isolation Digital PH Probe For Industrial Process

Product Specification

Built-In TEMP Electrical Isolation Digital PH Probe For Industrial Process Monitoring

 
The digital pH sensor adopts the classic electrochemical principle, which is reliable in measurement and stable in performance. It is widely used in environmental protection water treatment, surface water, purified water, circulating water and other systems, as well as electroplating, electronics, printing and dyeing, chemical, food, pharmaceutical and other process fields. Excellent performance in sewage treatment, drinking water treatment, surface water monitoring, pollution source monitoring, industrial process and other applications.
 
In order to obtain the best measurement results, regular maintenance is required. Maintenance includes cleaning of electrodes and checking for damage. Check whether the electrode wiring is correct, check the communication setting parameters (address, baud rate, parity bit, stop bit), etc.

 
Specification:

Please click the user manual of RS485 pH sensor here:
DPH7 digital pH User Manual.pdf
 
Features＆ Advantages

● All-in-one package, can be used with the online transmitters, DTU, and portable instruments
● RS485 interface, Modbus RTU, support access to standard industrial control system
● The protection grade is IP68, can work continuously and stably under water for a long time
● Internal storage of calibration data, support offline calibration, plug and play on site
 
 

Aplication:
Water treatment monitoring
Drinking water,surface water,water quality analyze,ground water,ect.

Industrial process monitoring and dosing control
Chemical,petroleum,paper,food and medicine,PCB manufacturing,etc.
 
FAQ
1. What is the measurement principle of this pH electrode?
A: The pH value potentiometric method uses the potential difference of glass electrodes for pH measurement.

2. How to judge the pH of the solution?
A: If the internal hydrogen ion concentration of the pH glass bulb is lower than the outside, the measured solution is recorded as acidic and the pH value is lower than 7; if the two are the same, the solution is neutral and the pH value is equal to 7; if the internal hydrogen ion concentration is higher than externally, the measured solution is alkaline and the pH value is higher than 7.

3. What is the wire length of the pH electrode?
A: The lead wire of this electrode is 1 m by default, other lengths need to be customized, contact our customer service, the price will vary with the change of length.