Hangzhou SED Pharmaceutical Machinery Co.,Ltd.
| Payment Terms | T/T,L/C, MoneyGram,Cash |
| Supply Ability | 30 Sets per month |
| Delivery Time | 35 Days after receiving the deposit |
| Packaging Details | Wooden Case |
| Name | Fully Auto Capsule Making Machine With 3 Phase Power Supply |
| Model | SED-7500J-I |
| Weight | 3500kg |
| Dimensions | 1790 × 1490 × (2150+210) mm |
| Power supply | 380V 50Hz 3P |
| Maxi. Capacity | 7500 capsules/min |
| Capsule specifications | 00#~5# and Safety Capsule A~E |
| Capsule feeding rate | ≥99.5% |
| Brand Name | SED-Pharma |
| Model Number | SED-7500J-I |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Auto Capsule Filling Machine For 00#-5# Capsule
Automatic Capsule Filler Machine Equipment With CE Passed 2000 Capsules/Min
Pharmaceutical Fully Automatic Hard Capsule Filling Machine For Powder Granule
Pharmaceutical Automatic Capsule Filling Machine
Product Specification
| Payment Terms | T/T,L/C, MoneyGram,Cash | Supply Ability | 30 Sets per month |
| Delivery Time | 35 Days after receiving the deposit | Packaging Details | Wooden Case |
| Name | Fully Auto Capsule Making Machine With 3 Phase Power Supply | Model | SED-7500J-I |
| Weight | 3500kg | Dimensions | 1790 × 1490 × (2150+210) mm |
| Power supply | 380V 50Hz 3P | Maxi. Capacity | 7500 capsules/min |
| Capsule specifications | 00#~5# and Safety Capsule A~E | Capsule feeding rate | ≥99.5% |
| Brand Name | SED-Pharma | Model Number | SED-7500J-I |
| Certification | CE | Place of Origin | China |
| High Light | capsule filling device ，capsule filling equipment | ||
Fully Auto Pill Capsule Making Machine With 3 Phase Power Supply
Product Description of Capsule Filling Machine
Our capsule-filling machine is used to encapsulate product (powder, and pellets) in gelatin capsules. Empty capsules are loaded into the capsule hopper where they are fed into the magazine. Capsules initially enter the magazine un-oriented. From the magazine, the capsules enter the sorting block where they are properly oriented (smaller end on the bottom). The capsules are then separated by vacuum. The lower portion of the capsule is filled. The upper portion of the capsule is inspected to ensure the capsule is separated. (If the capsule is not separated or is faulty, a pin will dislodge the capsule and the vacuum will remove it from the system.) The two halves are then joined together. The finished capsule is discharged to a chute and the station is cleaned with an air blast.
The capsule filler can use all makes of capsules (00#～5# and safety capsule A～E). Non-separated or improperly inserted capsules will be automatically rejected. Capsule target fill weight can be adjusted by changing dosing disks. At the end of a run, only a small quantity of product will be remaining in the hopper.
Technical Parameters
| Model | NJP-260 Fully automatic liquid capsule filler |
| Weight | 900kg |
| Dimensions | 1020×860×1970mm |
| Power | 5.75kw |
| Power supply | 3phase 4 wires AC 380V;50Hz |
| Maxi. Capacity | 260 capsules/m |
| Capsule specifications | 00#~5# and Safety Capsule A~E |
| Capsule feeding rate | ≥99.5% |
| noise | ≤75dBA |
| Filling precision | Liquid Above 300mg≤±3% |
| Compressed air | 0.06m3/min 0.3Mpa |
| Water | Recycling water |
| Vacuum degree | -0.02~-0.06 MPa |
| Water flow | 250L/h |
| Intake water diameter | 20mm |
| Discharge water diameter | 27mm |
| Work environmental temperature | 21℃±3℃ |
| Workshop’s height | Manual Feeding≥2.6m, Automatic Feeding≥2.8m |
| Related Humidity | 40~55% |
| Control system | PLC |
| Material | Stainless steel 304 and 316. |
Characteristic
1. This machine improves the internal design of mould rotary plate and adopts original Japan linear bearing, which can ensure its precision and service life.
2. It employs the cam underneath design and adds the pressure atomization oil pump, which can keep the cam groove lubricant, reduce wear and prolong the service life of accessories.
3. The upper and lower moulds of this machine carry out one-way movement. With employing the imported double-lip PU seal ring, it has very good sealing performance.
4. It adopts computer control, stepless frequency control of motor speed and digital display to make the operation more simple and intuitive.
5. It’s equipped with safety protection device for both operators and machine and auto-stop device for material lacking to make the machine run stably, safely and reliably, which is an ideal equipment for those pharmaceutical factories to produce hard capsules such as medicine or functional food.
6. This machine combines the mould blowing with sucking to ensure no dust in the mould hole and improve the rate of good finished capsules.
Product Details of Capsule Filling Machine
Application of Capsule Filling Machine
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2012
Total Annual:
1,000,000-10,000,000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. (Short for “SED Pharma”) was founded in 2012. It is a comprehensive pharmaceutical equipment supplier to provide pharmaceutical machinery, blood collection tube machinery, water treatment equipment, clean room facilities, pharma engineering ... Hangzhou SED Pharmaceutical Machinery Co.,Ltd. (Short for “SED Pharma”) was founded in 2012. It is a comprehensive pharmaceutical equipment supplier to provide pharmaceutical machinery, blood collection tube machinery, water treatment equipment, clean room facilities, pharma engineering ...
Get in touch with us
Leave a Message, we will call you back quickly!