Small Experimental Spray Pharmaceutical Dryers With High Efficiency

Product Specification

Small Experimental Spray Pharmaceutical Dryers With High Efficiency​

Product Description of Spraying Drying Machine

Experimental spray dryer main application in universities, research institutes and food, pharmaceutical and chemical enterprises laboratory production of micro-particle powder, for all solutions such as emulsions, suspensions with broad-spectrum applicability, for the drying of heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc

because the sprayed material is only sprayed into a mist size particles when the high temperature, so Only instant heat, can keep these active materials in the dry still maintain its active ingredients are not destroyed.

Product Parameters of Spraying Drying Machine

Advantages of Spraying Drying Machine

1) Refined nozzle, high efficiency.

2) Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/through-needle frequency.

3) Full-automatic control: one key to turn on the machine, after setting the spraying process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts by itself, the running animation is displayed on the touch screen, and the running process is clearly shown; when shutting down the machine, just press the stop button, and the machine is automatically and safely shut down.

4) Manual control: If you need to adjust the process parameters in the experimental process, you can easily switch to the manual state, the entire experimental process color touch screen dynamic display (animation).

5) With nozzle cleaner (through the needle), in the nozzle is blocked, will automatically clear, the frequency of the needle can be automatically adjusted.

6) Shutdown protection function: shutdown simply by pressing the stop button, the machine in addition to the fan immediately stop running, to ensure that the equipment will not be mistakenly operated (forced to shut down the fan) and cause the heating part to burn out.

7) Spraying, drying and collecting system is made of transparent high quality high borosilicate heat-resistant glass material, which makes the drying process in a pollution-free environment.

8) Built-in imported full oil-free air compressor, the particle size of the spray powder is normally distributed, very good fluidity, very low noise, less than 60db.

9) The atomization structure of two-fluid spray, the whole machine is made of high quality stainless steel material, compact design, no need for accessory equipment.

10) The design of drying temperature control adopts real-time regulation PID thermostat control technology, so that the whole temperature zone temperature control is accurate, heating temperature control accuracy ± 1 ℃.

11) In order to keep the sample pure, it is equipped with inlet air filter.

12) The feeding volume can be adjusted by feeding peristaltic pump, and the minimum sample volume can reach 80ml.

13) The finished dry powder after drying has a more uniform granularity, more than 95% of the dry powder is in the same granularity range.

14) For viscous materials, there is a nozzle cleaner (through-needle), which will automatically clear the nozzle when it is blocked, and the frequency of through-needle can be adjusted automatically.

15) The upgraded atomization system effectively solves the problem of adhesion of certain sticky materials in the cyclone. It causes the material to accumulate in the cyclone separator for a long time.

Products Show of Spraying Drying Machine

Other Products We Manufacture:

1.Automatic Labeling Machine

2.Capsule Counting Machine

3.Pharmaceutical Machinery Equipment

4.Automatic Cartoning Machine

5.Powder Mixer Machine

6.Freeze Dry Machine

7.Automatic Packing Machine

8.Capsule Filling Machine

9.Herbal Extraction Equipment

10.Liquid Filling Machine