Automatic Powder Pull Bag Packaging Machine

Product Specification

Automatic Powder Pull Bag Packaging Machine

Operation Procedure

This machine replaces manual packaging and realizes packaging automation for large enterprises, small and medium-sized enterprises. The operator only needs to put the prepared bags one by one and place hundreds of bags at the bag taking part of the equipment at a time, and the mechanical grip of the equipment will automatically take the bags, print the date, open the bags, signal the metering device, measure, feed, seal and export. It can also add detailed functions such as door opening emergency stop, automatic card throwing, exception elimination and other functions according to product packaging requirements. The whole process of packaging does not require manual operations, which improves production efficiency, saves labor costs and management costs, and greatly reduces costs.

Suitable for paper-plastic composite, plastic-plastic composite, aluminum-plastic composite, PE composite. The low loss of packaging materials, the prefabricated packaging bags are used, the packaging bag patterns are perfect, and the sealing quality is good, thus improving the product quality. It can also be used for multiple purposes in one machine. It can realize automatic packaging of granules, powders, lumps, liquids, soft cans, toys, hardware and other products only by matching different measuring devices according to different materials.

Product Parameters

Application

Suitable for candies, nuts, raisins, peanuts, melon seeds, nuts, potato chips, chocolate, tea, biscuits, cat food, dog food and other particles and irregular automatic measurement packaging.

Suitable bag types

Self-supporting bags, zipper bags, four-side sealing bags, three-side sealing bags, paper bags and other composite bags.

Work process

1. Load the bag, use the horizontal bag method, and send it to the machine clip (no bag alarm)

2. Open zipper + coding (ribbon detection, stop alarm when the ribbon runs out, touch screen display)

3. Upper bag opening + lower bag opening (open bag detection, no material blanking if the bag is not opened)

4. Unloading (detection: material is not filled, heat-sealed is not sealed) + pallet vibration

5. Dust cleaning (dust cleaning of bag mouth)

6. Reserve

7. Heat sealing one (detection: no heating, no heat sealing; need to customize the heat sealing knife) + exhaust

8. Heat sealing II
 

Main performance and features

1. Wide range of packaging: suitable for powders of various states and properties;

2. Applicable to different types of packaging bags;

3. Convenient operation: PLC control and man-machine interface operating system make the operation intuitive and convenient;

4. Easy to adjust: the replacement of varieties can be completed within about three minutes;

5. High degree of automation: unmanned in the whole process of weighing and packaging, and automatic alarm when fault occurs;

6. Perfect prevention system, which can intelligently detect whether the bag is opened and whether the bag is complete. In the case of unsuitable feeding, no feeding and no heat sealing, no waste of bags and materials, and cost savings;

7. The packaging parts of the machine are made of stainless steel to ensure the hygiene and safety of the materials and comply with GMP standards;

8. Imported tolerance plastic bearings are used in some components, without oiling, reducing the pollution to materials;

9. Oil-free vacuum pump is used to avoid polluting the production environment;

10. The dust-proof and waterproof design can be washed with water, which reduces the difficulty of cleaning and improves the service life of the machine;

11. Using prefabricated packaging bags, high sealing quality, improve the grade of finished products;

12. The device is equipped with a transparent plexiglass protective door.