30r/Min 24mm Diameter Rotary Tablet Compression Machine

Product Specification

Large 24mm Diameter Tablet Presser Industrial Pill Press Machine ,Rotary Tablet Press Machinery

1. This machine is a single-pressure automatic rotating, continuous tablet pressing machine, which presses granular raw materials into various tablets. It is mainly used in the production of tablets in the pharmaceutical industry, and is also applicable to chemical, food, electronic and other industrial sectors. Suitable for laboratory reagent and small batch production.
2. The outer cover is fully enclosed in the form of stainless steel, and the inner table is made of stainless steel. The surface of the turntable has been specially treated to keep the surface gloss and prevent cross contamination, in line with the requirements of GMP.
3. The door with transparent glass can clear the state of the tablet and can be fully opened, which is easy to clean and maintain inside. All controllers and operating parts are rationally arranged. The variable frequency speed control device is used for electric speed control, which is easy to operate and smooth in rotation
4. All transmission devices are arranged inside the machine to keep the parts clean. Equipped with overload protection device, when the pressure overload, can automatically stop. The machine is equipped with electromagnetic brake motor and other protective devices, which can also be adjusted and operated during operation.
5. Before use, the quality of the die shall be checked repeatedly to see if there are missing edges, cracks, deformation and tightness that are not in conformity with the requirements, and if the device is complete and in good condition.
6, check whether the powder particles of raw materials are dry and the powder content in the particles preferably not more than 10%, such as unqualified do not use hard, otherwise it will affect the normal operation of the machine and service life and the loss of raw materials.
7, pressure adjusting control should be first on the indicating needle placed on "0" position, the FenZi pour into the bucket, turn the commissioning the handwheel by hand, adjust the filling and pressure at the same time, gradually increase to the weight of the tablet and the degree of hard and soft to fulfill the requirements of the finished product, and then drive motor, first to open the clutch, an official production operation, in the process of production, should be regularly to sample the quality of the tablet is in line with the requirements, the adjustments if necessary.
8, the speed of choice has a direct effect on the lifespan of the machine use, due to the nature of the raw material viscosity and diameter size and pressure on the use of cannot be uniform, the structure of the machine with a pulley transformation methods are divided into fast and slow, slow in Yangtze river delta drive outside the rope round, apply to the suppression of mineral, plant grass and rapid forming hard material, such as fast with short triangular driving rope wheel, suitable for suppression of adhesion, good lubricity and ease of molding material, so the user must according to actual situation.
9. The manager must be familiar with the technical performance, internal structure, operation principle of the control mechanism of the machine and must not leave the working place during operation. In the use of the machine should always pay attention to whether the sound is normal, in case of shrill call immediately line stop for inspection and elimination, not forced use.

PRODUCTS SHOW

1. The upper part of the machine is of tablet structure, which is mainly composed of upper punch, middle punch and lower punch. Three parts are connected into a body, and 33 punching dies are arranged evenly on the edge of the turntable.The tail of the upper and lower mould is embedded in the fixed curve rail guide when the rotary plate makes the rotation movement, the upper and lower impulse makes the rise and fall movement with the curve rail guide to achieve the tablet purpose.
2. Main working processes are as follows :(1) filling; (2) Pressure; (3) Film production;
Three procedures are carried out continuously. Filling and pressurization are controlled by adjusting mechanism. Attached with table instructions, it is easy to operate.
3. The distribution of the structure is double-pressure type. There are two sets of symmetrical pressing wheels on the left and right sides.
4, the rotary die hole is 33, every single arrangement, its advantage is in the work, the left and right pressure wheel in the same time compression so that the machine's vibration and power consumption is greatly reduced.
5, motor mounted on frame with triangle drag worm rotating turntable, and stepless variable speed pulley on the motor shaft device, by moving machine skateboards, can be arbitrary adjust the speed.
6. The side of the machine stand is equipped with powder suction box, including blower, powder storage room and powder filter room. When the machine is running at high speed, the flying powder and the falling powder of the middle mold are generated, which are expelled through the powder suction nozzle, so as not to be bonded and blocked and to maintain a stable and normal operation.

MAIN TECHNICAL DATA

APPLICATION DESCRIPTION

1, this machine is a kind of automatic rotating continuous tablet pressing machine, it is pharmaceutical, chemical, food and other industrial departments, processing all kinds of granular raw materials pressed into the basic equipment.
2. It is suitable for mass production of pressed round tablets, sugar tablets, calcium tablets, etc.
3. It is not suitable for semi-solid, moist powder and non-granular very fine powder pressing.

FINISHED PRODUCT DISPLAY

PRODUCTS SHOW