ASME B16.5 SO Flanges A105 Class 150 Carbon Steel Slip On Flange for Piping

Product Specification

ASME B16.5 SO Flanges A105 Class 150 Carbon Steel Slip On Flange for Piping Systems

Introduction:

ASME B16.5 is a standard published by the American Society of Mechanical Engineers (ASME) that specifies the dimensions, materials, and pressure-temperature ratings for flanges and flanged fittings used in piping systems.

Slip-on flanges, as defined in ASME B16.5, are a type of flange that is designed to slip over the end of a pipe and then be welded in place. They are known for their ease of installation and alignment. 

Design: Slip-on flanges have a slightly larger inner diameter than the outer diameter of the pipe they are designed to fit over. The flange is positioned on the pipe and then welded both inside and outside.

Materials: They are available in a variety of materials, including carbon steel, stainless steel, and alloy steel, depending on the application and required corrosion resistance.

Pressure Ratings: Slip-on flanges are designed to handle various pressure ratings, which are specified in the ASME B16.5 standard. Common pressure classes include 150, 300, 600, 900, 1500, and 2500 pounds.

Installation: Slip-on flanges are ge​nerally easier and quicker to install compared to weld neck flanges because they do not require precise alignment of the pipe. However, the welds used in slip-on flanges may not be as strong as those used in other flange types.

ANSI/ASME B16.5 Class 150 Carbon Steel Slip On Flanges:

Carbon steel slip on flanges are a common type of flange connection device often used in piping systems. They are made of carbon steel material, which has excellent corrosion resistance and high strength.

The characteristic of carbon steel slip on flanges is that there is a circular protrusion on the inner bore of the flange, while the end connected to the pipe is flat. It is connected by slipping the flange onto one end of the pipe and securing it to another flange with bolts. This design makes installation and dismantling relatively simple and suitable for some low-pressure and non-critical applications.

Carbon steel slip on flanges are widely used in industries such as petroleum, chemical, shipbuilding, and food processing. They are suitable for pipeline systems that transport non-corrosive fluids and gases, such as water, steam, and oil.

The specific specifications and descriptions of carbon steel slip on flanges may vary depending on the different manufacturers and application requirements. It is recommended to refer to relevant standards and technical specifications when selecting and using them.

ANSI/ASME B16.5 Slip On Flange Dimensions:

1.Dimensions are in millimeters(mm).

2.Dimensions can be specified by different purchasers.

Grades of Carbon Steel Flanges:

American standard carbon steel flanges are flanges made of carbon steel and are widely used in industries such as petroleum, chemical, natural gas, shipbuilding, construction, and water conservancy. Its carbon steel grades are usually divided into the following parts:

ASTM A105 Characteristics: Good weldability and machinability; used in various industries including oil and gas, chemical, and power generation.

ASTM A350 LF2 Characteristics: Maintains toughness and strength at low temperatures; commonly used in cryogenic applications.

ASTM A234 WPB Characteristics: Suitable for moderate to high temperatures and pressures; commonly used in the power and petrochemical industries.

ASTM A333 Gr. 6 Characteristics: Designed to perform well in colder environments; used in applications like pipelines in cold climates.

ASTM A516 Gr. 70 Characteristics: High tensile strength and good weldability; used in a wide range of industries including power generation and chemical processing.

ASTM A694 F42, F52, F60, F70 Characteristics: Provides enhanced strength and durability for high-pressure service; commonly used in the oil and gas industry.

ASTM A105N Characteristics: N denotes normalized; used in high-stress applications requiring better mechanical properties and uniformity.

ASTM A181 Characteristics: Provides good mechanical strength and ductility; used in steam, oil, and gas services.

Advantages of Carbon Slip-on Flanges:

Ease of Installation

• Alignment: Slip-on flanges are designed to slip over the pipe, making alignment easier compared to other flange types. This simplifies the installation process, especially in systems where precise alignment is challenging.
• Welding: They typically require welding only on the outside and inside surfaces, which can be less complex than the welding needed for other flange types like weld neck flanges.

Cost-Effective

• Material Usage: Slip-on flanges generally use less material than weld neck flanges, making them more cost-effective. The design often results in lower overall costs for both the flange and the installation.
• Manufacturing: The manufacturing process for slip-on flanges is relatively straightforward, contributing to their lower cost.

Versatility

• Applications: They can be used in a variety of applications, from low-pressure to moderate-pressure systems. They are suitable for many industries, including water, oil, and gas pipelines.
• Sizes: Slip-on flanges are available in a wide range of sizes and pressure ratings, making them versatile for different piping requirements.

Design Flexibility

• Fit and Tolerance: The design allows for slight adjustments in pipe alignment, which can be beneficial in systems where perfect alignment is difficult to achieve.
• Ease of Maintenance: Slip-on flanges can be easier to disassemble and replace if needed, which can simplify maintenance and repairs.

Reduced Risk of Leakages

• Welding Points: The flange is welded both inside and outside the pipe, which can reduce the risk of leakage compared to flanges that rely on a single welding point or bolt connections.

Strength and Durability

• Strength: While not as strong as weld neck flanges, slip-on flanges still provide adequate strength for many applications, especially in low- to medium-pressure systems.
• Durability: Carbon steel slip-on flanges are durable and can withstand various operational stresses, making them suitable for many different environments.

Accessibility

• Simplified Construction: Their ease of installation and alignment makes them accessible and practical for many construction and assembly projects, particularly in environments where complex flange types may be impractical.

Applications of ASME B16.5 Class 150 Carbon Steel Slip On Flanges:

1. Water and Wastewater Systems

• Pipelines: Used in municipal and industrial water pipelines, including treatment and distribution systems.
• Sewerage: Applied in wastewater systems for connecting pipes and equipment.

2. Oil and Gas Industry

• Pipeline Systems: Employed in various pipelines for transporting crude oil, refined products, and natural gas.
• Processing Plants: Utilized in refineries and chemical processing plants for joining different sections of piping.

3. HVAC Systems

• Air Ducts: Used in heating, ventilation, and air conditioning systems to connect ductwork and other components.
• Chilled Water Lines: Applied in chilled water systems for cooling and temperature control.

4. Industrial Processing

• Chemical Plants: Used for connecting pipes and equipment in chemical processing and production facilities.
• Manufacturing: Applied in various manufacturing processes that require fluid handling and transfer.

5. Power Generation

• Steam Systems: Utilized in steam lines for power plants, including both fossil fuel and nuclear plants.
• Cooling Systems: Employed in cooling water systems and auxiliary piping.

6. General Construction

• Building Services: Used in commercial and residential construction for connecting and supporting various piping systems.
• Plumbing: Applied in plumbing systems for water and gas distribution.