Commercial Biomass Pellet Line 1- 5TPH Rice Straw Pellet Making Machine

Biomass Pellet Fuel 1 - 5 TPH Wood Pellet Production Line For Commercial

Product Description:

Our Biomass Pellet Production Line provides an excellent solution for producing high-quality, high-density biomass pellets. It can process a wide variety of raw materials, including wood pellets, sawdust, rice husks, cotton stalks, and other biomass materials. such as Wood chips, straw, cotton stalks, rice husks, peanut shells, bamboo powder, palm and other plant wastes, cement, ash, carbon powder, waste paper and other chemical raw materials that are difficult to bond and form.

The line has a processing capacity of 2-20t/h, producing biomass pellets with a density of 1.1-1.3g/cm3. The product has a high durability, with more than 95% of its pellets remaining intact after storage.  We could customize the pellet production line according to your requirement.

The Biomass Pellet Production Line is extremely versatile and can be used for a variety of applications. It is perfect for producing wood pellets for fuel and other products. It is also an ideal solution for those looking to produce biomass pellets for industrial, commercial, or home use. The line is easy to operate and maintain, providing a reliable and cost-effective solution for those looking to produce biomass pellets.

Applied to biomass fuel plants, power plants, wood processing plants, fertilizer plants, chemical plants, traditional Chinese medicine plants, wineries, etc., it is the most ideal compression and densification equipment with small investment, quick results, and no risk.

1, Crushing system:  Materials with a diameter of less than 20cm enter the crushing chamber from the small feed inlet 1 and are crushed by high-speed rotating hammers. Under the effect of centrifugal force, the crushed materials are rapidly crushed along the outer edge of the rotor by continuous impact, strike and rubbing of hammers. The crushed powder is sent out of the machine through the screen hole under the centrifugal pressure of the rotor and the suction force of the fan.

2, Drying system: dries materials by hot air, which is mainly applicable to bulk materials with high moisture content such as sawdust and rice.
Due to the high moisture content of materials and high output requirements, in the actual production process, we improved the previous drying limitations and adopted the method of secondary drying. The two sets of dryers are overlapped for better drying effect.

3, Pellet system: The vertical ring die pellet machine is specially used to make pellets of biomass raw materials.
The pressure wheel rotates to make the material generate centrifugal force and distribute evenly around it

4, Cooling system: cooling and screening machine is a special equipment for cooling and sorting particles. It is
suitable for screening all kinds of feed, sawdust particles and other materials. Long life, simple maintenance,
simple operation and so on.

5, Packing system : This machine adopts automatic control of fast, medium and slow three-speed feeding, quantitative, bag clamping and unloading. The instrument realizes the setting and weight accumulation of control parameters such as fast, medium and slow feeding amount, and can be configured to automatically print out. The equipment has the characteristics of fast packaging speed, high
packaging precision, good stability and easy operation.

Once cooperate, we will provide 3D drawings.

Features:

• Air-cooled dust removal, long-term operation, high-efficiency production, energy saving and environmental protection
• Double-layer mould, one machine with two uses, more choices, more gains
• Two sets of lubricating, large shaft pressure rollers, guaranteed life, high and stable production
• The pressure wheel rotates, the material is centrifugal, the distribution is even, and the effect is good
• Strong degree of automation, stable operation, no special care required.

Applications:

Support and Services:

Our team of experts provides support and service for biomass pellet production lines. We offer:

• Technical consultation.
• Consulting on installation, commissioning, and start-up.
• Maintenance support.
• Troubleshooting and technical problem solving.
• Repair and replacement of parts.
• Guidance on safety and environmental regulations.

We strive to provide the best service and support for our customers. Our team is available 24/7 to answer any questions or concerns you may have.

Factory Picture:

Packing and Shipping: