Fibre Easy Communication Service Limited
| Name | FCTEL E1 to 4 Channels 10/100Base-T Ethernet SNMP Managed Protocol Converter |
| E1 Interface | 75/120 ohm |
| Ethernet Interface | FC/SC |
| Power supply | AC/DC |
| Working Temperature | -10°C ~ 50°C |
| Dimension | Desktop |
| Distance | 20KM |
| Color | Gray |
| Warranty | 3 years |
| Packaging Details | Standard export carton packing |
| Delivery Time | 5-15days |
| Payment Terms | L/C,T/T |
| Supply Ability | 2000 Pieces peer week |
| Place of Origin | Zhejiang, China (Mainland) |
| Brand Name | FCTEL/ODM/OEM |
| Certification | ISO9001 |
| Model Number | FC-PCE51 |
View Detail Information
Explore similar products
E1 to Ethernet Converter, G.703 to RJ45 and Coax to Ethernet
Co-Directional 64K-FE Protocol Media Converter
Interface protocol converter 4e1 to Eth With one lan Protocol Converter
double power supply E1 to 31Channel RS232-422-485 back panel Protocol Media
Product Specification
| Name | FCTEL E1 to 4 Channels 10/100Base-T Ethernet SNMP Managed Protocol Converter | E1 Interface | 75/120 ohm |
| Ethernet Interface | FC/SC | Power supply | AC/DC |
| Working Temperature | -10°C ~ 50°C | Dimension | Desktop |
| Distance | 20KM | Color | Gray |
| Warranty | 3 years | Packaging Details | Standard export carton packing |
| Delivery Time | 5-15days | Payment Terms | L/C,T/T |
| Supply Ability | 2000 Pieces peer week | Place of Origin | Zhejiang, China (Mainland) |
| Brand Name | FCTEL/ODM/OEM | Certification | ISO9001 |
| Model Number | FC-PCE51 |
FCTEL E1 to 4 Channels 10/100Base-T Ethernet SNMP Managed Protocol Converter
FC-PCE51converter is based on FPGA, providing one framed E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.
Product Features
Ø Can realize monitor and control of remote equipment, OAM management data did not take up user’s timeslot and save E1 bandwidth
Ø E1 supports any timeslot set, the rate is 64K-2048K
Ø The local device can forced the remote device rate follow it
Ø Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop return;
Ø Have indicator when the device is power-off or E1 line is broken or lose signal;
Ø Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
Ø The Ethernet interface supports jumbo frames (2036 Bytes);
Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering
Ø Ethernet interface supports10M/100M, half/full duplex auto- Negation and AUTO-MDIX
Ø Have Ethernet monitor self-reset function, the equipment will not dead
Ø Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function;
Ø Provide 2 clock types: E1 master clock and E1 line clock;
Ø Have three Loop Back Mode: E1 interface Loop Back (ANA),Ethernet interface Loop Back(DIG),Command the remote ,Ethernet interface Loop Back(REM)
Ø Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
Ø Support SNMP Network Management;
Technical parameters
|
E1 Interface |
Interface Standard; comply with protocol G.703 |
|
Interface Rate; n*64Kbps±50ppm |
|
|
Interface Code; HDB3 |
|
|
E1 Impedance; 75Ω (unbalance), 120Ω (balance) |
|
|
Jitter tolerance; In accord with protocol G.742 and G.823 |
|
|
Allowed Attenuation; 0~6dBm |
|
|
Ethernet interface (10/100M) |
Interface rate; 10/100 Mbps, half/full duplex auto-negotiation |
|
Interface Standard; Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
|
|
MAC Address Capability; 4096 |
|
|
Connector; RJ45, support Auto-MDIX |
|
|
Power |
Power supply; AC180V ~ 260V;DC –48V;DC +24V |
|
Power consumption; ≤10W |
|
|
Dimension |
Mini; 216X140X31mm( WX DXH) |
|
Piece Weight; 1.1KG |
|
|
Working environment |
Working temperature; -10°C ~ 50°C |
|
Working Humidity; 5%~95 % (no condensation) |
|
|
Storage temperature; -40°C ~ 80°C |
|
|
Storage Humidity; 5%~95 % (no condensation) |
|
FCTEL |
OEM manufacturer |
|
Factory |
Located in Hangzhou |
|
Special requirements |
Customized |
|
Certifications |
ISO9001, CE |
|
Payment |
T/T, L/C, Wester Union, Paypal |
|
Shippment |
DHL, Fedex, TNT, UPS, EMS |
|
Warranty |
3 years |
Contact us
Wendy
Skype:linaqueen89
Mail: shl@fctel.com.cn
QQ:127 405 7287
T/F: +86-188 6880 5807
Website: fctel.com.cn
"Design and manufacture the most reliable and efficient fiber optic communications products in the industry."
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
5000000-100000000
Employee Number:
200~500
Ecer Certification：
Active Member
Fibre Easy Communication Service Limited "Design and manufacture the most reliable and efficient fiber optic communications products in the industry." 8+ Years of Manufacturing Quality Products in the Mainland OVERVIEW Founded in 2008,Fibreasy desi... Fibre Easy Communication Service Limited "Design and manufacture the most reliable and efficient fiber optic communications products in the industry." 8+ Years of Manufacturing Quality Products in the Mainland OVERVIEW Founded in 2008,Fibreasy desi...
Get in touch with us
Leave a Message, we will call you back quickly!