Fibre Easy Communication Service Limited
| Name | 19 inch 4E1 to 4FE Ethernet Extender Protocol Converters |
| E1 Interface | 75 Ohm/120 Ohm |
| Ethernet Interface | FC/SC |
| Power supply | AC/DC |
| Working Temperature | -10°C ~ 50°C |
| Dimension | 19 inch |
| Distance | 20KM |
| Color | Gray |
| Warranty | 3 years |
| Packaging Details | Standard export carton packing |
| Delivery Time | 5-15days |
| Payment Terms | L/C,T/T |
| Supply Ability | 2000 Pieces peer week |
| Place of Origin | Zhejiang, China (Mainland) |
| Brand Name | FCTEL/ODM/OEM |
| Certification | ISO9001 |
| Model Number | FC-PC4F4 |
View Detail Information
Explore similar products
E1 to Ethernet Converter, G.703 to RJ45 and Coax to Ethernet
Co-Directional 64K-FE Protocol Media Converter
Interface protocol converter 4e1 to Eth With one lan Protocol Converter
double power supply E1 to 31Channel RS232-422-485 back panel Protocol Media
Product Specification
| Name | 19 inch 4E1 to 4FE Ethernet Extender Protocol Converters | E1 Interface | 75 Ohm/120 Ohm |
| Ethernet Interface | FC/SC | Power supply | AC/DC |
| Working Temperature | -10°C ~ 50°C | Dimension | 19 inch |
| Distance | 20KM | Color | Gray |
| Warranty | 3 years | Packaging Details | Standard export carton packing |
| Delivery Time | 5-15days | Payment Terms | L/C,T/T |
| Supply Ability | 2000 Pieces peer week | Place of Origin | Zhejiang, China (Mainland) |
| Brand Name | FCTEL/ODM/OEM | Certification | ISO9001 |
| Model Number | FC-PC4F4 |
19 inch 4E1 to 4FE Ethernet Extender Protocol Converters
FC-PC4F4 is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX. It can realize 1~4 E1 channel to convert between Ethernet optical interface. This device can transmit the transceiver signal point to point to Ethernet optical interface to make E1 channels interconnected with Ethernet optical interface. Unlike general remote network bridge, this device can support 1-4Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available. It allows E1 lines transmission time delay difference
Product Features
Ø To achieve Ethernet data transparent transmission in 1-4E1 circuits
Ø Can realize the local and the remote device reset
Ø Ethernet Interface is 100BASE-FX, support VLAN protocol
Ø Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function
Ø Single Channel lines rate is 1984Kbit/s, 4Channel Bandwidth is up to 7936Kbit/s
Ø Channel 10M/100M Ethernet interface can isolate each other to realize communication independently
Ø Ethernet interface supports10M/100M, half/full duplex auto- adaptable and AUTO-MDIX (crossed line and
straightly connected line self-adaptable )
Ø CRC automatic alarm threshold can be set to isolate the poor quality transmission lines and cut off a single-direction. When 2M branch
circuit one direction error rate exceeds threshold, cutting off this direction the other direction is not affected; that is to say, both of the
Ethernet directiontransmission can be asymmetric
Ø Allow 4-Channel E1 transmission time delay difference 100ms. When the margin exceed the allowed range, the system can automatically
stopon the E1 that time delay is too large to send data
Ø E1 interface conform to ITU-T G.703, G.704 and G.823, not support the use of signal timeslot
Ø E1 interface module with inter-set clock recovery circuit and HDB3 code circuit
Ø Support E1 channel hot-plug in the device, and automatically detects the effective E1 channel and will not interrupt data transmission
Ø Can support 1-4Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available;
Technical parameters
|
E1 Interface |
Interface Standard; comply with protocol G.703 |
|
Interface Rate; n*64Kbps±50ppm |
|
|
Interface Code; HDB3 |
|
|
E1 Impedance; 75Ω (unbalance), 120Ω (balance) |
|
|
Jitter tolerance; In accord with protocol G.742 and G.823 |
|
|
Allowed Attenuation; 0~6dBm |
|
|
Ethernet interface (10/100M) |
Interface rate; 10/100 Mbps, half/full duplex auto-negotiation |
|
Interface Standard; Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
|
|
MAC Address Capability; 4096 |
|
|
Connector; RJ45, support Auto-MDIX |
|
|
Power |
Power supply; AC180V ~ 260V;DC –48V;DC +24V |
|
Power consumption; ≤10W |
|
|
Dimension |
Product Size; 216X140X31mm(WX DXH) |
|
Simple packaging : 274X193 X84mm ( WX DXH) |
|
|
Piece Weight; 1.3KG |
|
|
Working environment |
Working temperature; -10°C ~ 50°C |
|
Working Humidity; 5%~95 % (no condensation) |
|
|
Storage temperature; -40°C ~ 80°C |
|
|
Storage Humidity; 5%~95 % (no condensation) |
|
FCTEL |
OEM manufacturer |
|
Factory |
Located in Hangzhou |
|
Special requirements |
Customized |
|
Certifications |
ISO9001, CE |
|
Payment |
T/T, L/C, Wester Union, Paypal |
|
Shippment |
DHL, Fedex, TNT, UPS, EMS |
|
Warranty |
3 years |
Contact us
Wendy
Skype:linaqueen89
Mail: shl@ fctel.com.cn
QQ:127 405 7287
T/F: +86-188 6880 5807
Website: www.fctel.com.cn/en/
"Design and manufacture the most reliable and efficient fiber optic communications products in the industry."
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
5000000-100000000
Employee Number:
200~500
Ecer Certification：
Active Member
Fibre Easy Communication Service Limited "Design and manufacture the most reliable and efficient fiber optic communications products in the industry." 8+ Years of Manufacturing Quality Products in the Mainland OVERVIEW Founded in 2008,Fibreasy desi... Fibre Easy Communication Service Limited "Design and manufacture the most reliable and efficient fiber optic communications products in the industry." 8+ Years of Manufacturing Quality Products in the Mainland OVERVIEW Founded in 2008,Fibreasy desi...
Get in touch with us
Leave a Message, we will call you back quickly!