Dongguan Chuangwei Electronic Equipment Manufactory
| Payment Terms | T/T, L/C |
| Supply Ability | 300 sets per months |
| Delivery Time | 1-3 days after payment confirm |
| Packaging Details | each set be packed in plywood case |
| Work areas | 19.68" x 19.68" |
| X/Y/Z Work Area | 300/300/100 MM |
| Repeatability | +/- 0.01mm / axis |
| Interpolation Function: | 3 axis |
| I/O Signals Port | 8 Inputs / 8 Outputs |
| Trade Term: | EXW |
| Brand Name | Chuangwei |
| Model Number | CW 300M |
| Certification | CE ISO |
| Place of Origin | Dongguang China |
View Detail Information
Explore similar products
PCBA Conformal Coating Machine with 0.02mm Precision Double Nozzle
CE Automated Dispensing Machines Dispenser Robot with 19.68" x 19.68" Work area
High Accuracy CE Certificate Glue Dispensing Equipment With Pedal Switch
High Pricision Glue Applicator / Glue Dispensing Machine 220v Or 110v
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 300 sets per months |
| Delivery Time | 1-3 days after payment confirm | Packaging Details | each set be packed in plywood case |
| Work areas | 19.68" x 19.68" | X/Y/Z Work Area | 300/300/100 MM |
| Repeatability | +/- 0.01mm / axis | Interpolation Function: | 3 axis |
| I/O Signals Port | 8 Inputs / 8 Outputs | Trade Term: | EXW |
| Brand Name | Chuangwei | Model Number | CW 300M |
| Certification | CE ISO | Place of Origin | Dongguang China |
| High Light | pcb dispenser ，Auto Dispensing Machine | ||
Description:
The 300MM Stepper is our most popular industrial robot with a dispensing area of 11.81" x 11.81" (300MM X 300MM). The 300MM Cartesian robot represents a substantial cost saving in comparison to similar desktop robots. Its overall footprint has a depth of less than 26 inches (640MM), suitable for an industrial bench. This line of robots is also available with a low cost vision system.
These benchtop industrial robots are ideal for automating a current dispensing application. With the various work areas offered almost every application can be fitted on one of the models in this series; 200, 300 or 400MM Robots.
A program consists of a series of instructions stored in the main unit, each instruction stored in a numbered memory address. An address may record a point location, X, Y, and Z axis value, point type or instruction which sets a certain parameter, such as a dispensing time or line speed.
Technical parameters:
The automatic dispenser machine can satisfy various requirements for dispensing, only need to choose different fixtures and math with dispensing systems.
The following installation instruction is based on the 30CC needle cylinder clamp and simple type dispensing system as a model.
1. The standard accessories include the 30CC needle cylinder clamps, and they can be applied to 30CC or 55CC needle cylinder. If you want to use other needle cylinder, then you have to purchase other needle cylinder clamps appropriate.
2. Fix the needle cylinder clamps onto the Z axle. Put the hexagon socket flat head screws through the holes of the clamps and then lock on the Z ground side. The clamp has a couple of holes to select, according to the specific requirements .
3. Connect the signal port(three holes) of the dispenser machine on the backside to the signal port in the controller with dispenser signal line. The signal port in the dispenser machine is the same one that connecting with the foot-plate. Thus a problem may appear that the port can not be shared, if your dispenser machine is not purchased along with the matching machine. In such case, please contact the Extruder supplier for joint exchanging.
4. Connect the compressed air source to the dispenser controller, put the needle cylinder collet onto the needle cylinder and tighten it, and put the needle cylinder into the needle cylinder clamps and lock the screws which are used to fix the needle cylinder.( Please don’t over tighten, in case of deformation. And once it deforms, the piston then cannot fit with the inner side of the needle cylinder, and cause air leakage.)
5. Connect the handheld programmer to the machine.
6. Connect the dispenser machine and the controller to 220V power source.
7. Do make sure the pressure pipe of the needle cylinder collet and the power source will not influence the motion of each axles and working plate.
8. Congratulations for completing primary set of the dispenser machine, please learn teaching mode operation according to the following chapters.
Why us
| 1.Engineers available to service machinery oversea. | Engineers are available to be sent to freign countries to do machinery training and offer technical support. |
| 2.Mature technique & forerunner to process makes high quality machinery. | As largest manufactory in South China, we have 12 years experience on PCB separator machines and soldering machines. pcb router machine Our R&D team continuously upgrade the existing machines to meet the market development trend. |
| 3.Effective customer service. pcb router machine | All of us together are stronger and wiser than any one of us individually. To succeed, we must assume responsibility, cooperate with fellow associates and withdepartments, effectively comminicate with one another, foster enthusiam and participate in decision-making. To be seay reachable by customers and provide prompt replies to solve their problems and create value for customers. |
| 4.One year warranty for the machines except accessories. b router machine | Robust frame construction and Japanese steel blades obtained good appraise and recognized by and oversea clients. We offer parts for replacement under warranty free of charge, clients only need to bear freight charge. |
| Our mission: | Ongoing PCB industry PCB separator technological innovation, to create greater value, allowing customers to success |
| Our Vision: | PCB industry to become the world's leading solution providers PCB separator. pcb router machine |
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2004
Total Annual:
4 million-5 million
Employee Number:
60~100
Ecer Certification：
Verified Supplier
Established in 2004, Chuangwei Electronic Equipment Manufactory is a professional manufacturer and exporter that is concerned with the design ,development and production of pcb depaneling machine, covering punching, routing, laser depaneling & v-groove cutting, hot bar soldering machine &... Established in 2004, Chuangwei Electronic Equipment Manufactory is a professional manufacturer and exporter that is concerned with the design ,development and production of pcb depaneling machine, covering punching, routing, laser depaneling & v-groove cutting, hot bar soldering machine &...
Get in touch with us
Leave a Message, we will call you back quickly!