Winsmart Electronic Co.,Ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 100 sets |
| Delivery Time | 7-15 days |
| Packaging Details | Plywood case |
| PCB Material | FR4, MCPCB |
| Voltage | 220V |
| After-sales service provided | Engineers available to service machinery overseas |
| Power(w) | 500W |
| Certificate | CE |
| Name | Die Punching Machine |
| Brand Name | Winsamrt |
| Model Number | SMTP300 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
500W PCB Separator Punching Machine 0.05mm Cutting Precision Wire Cut Processing
OEM Supported Pcb Punching Tool , 0.02mm Precision PCB Punching Mold
Customized Pcb Punch Die Tooling For Flex And Rigid PCB Boards
3-15 Ton Air Driven PLC Control FPC Die Tooling PCB Punching Machine
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 100 sets |
| Delivery Time | 7-15 days | Packaging Details | Plywood case |
| PCB Material | FR4, MCPCB | Voltage | 220V |
| After-sales service provided | Engineers available to service machinery overseas | Power(w) | 500W |
| Certificate | CE | Name | Die Punching Machine |
| Brand Name | Winsamrt | Model Number | SMTP300 |
| Certification | CE | Place of Origin | China |
| High Light | Cylinder Driven Die Punching Machine ，PCB Separator Die Punching Machine ，3A PCB Punching Machine | ||
Environmental Cylinder Driven Die Punching Machine PCB Separator
Die Punching Machine Description:
Punching is a process where singe PCBs are punched out of the panel through the use of specia fixture. It is a two-part fixture, with sharp blades on one part and supports on the other. The production capacity of sunch a system is high, but fixtures are quite expensive and require regular sharpening.
Die Punching Machine Features:
1. Depaneling PCB/FPC by means of punching dies, to avoid micro-cracks caused by manual.
2. Die toolings is changeable
3. Easy set up of punching dies
4. Loading and unloading PCBs is convenient
5. Easy operation, has safe protection system
6. Air cylinder driven, environmental protection
7. High efficiency, cycle cutting time controls within 15 seconds, suitable for high volume PCBs
Die Punching Machine Specification:
| Working area | 460*320mm |
| Working pressure | 0.45-0.7Mpa |
| Cutting precision | ±0.05mm |
| Cycle time | 7-15 seconds |
| Output | 8T |
| PCB/FPC thickness | 0.08-3.5MM |
| PCB/FPC material | FPC, FR1, FR4, CEM-1, CEM-3, MCPCB |
| Cutting mode | Punching |
| Punch fixture | Die tooling(mold) |
| Working Property | LCD display, Automatically records the number of processed products, automatic punching |
| Transmission port | International standard |
| Operation Language | English |
| Stroke | 50MM |
| Mold height | 170MM |
| Power | 380/220V |
| Fuse | 3A |
| Machine dimension | 820x740x1750mm |
| Machine weight | 680kgs |
PCB Punching Machine Die Tooling Installation Steps:
1. Remove the security door
2. Place the two pin holes on the bottom plate of the lower mold on the two hooks.
3. Feed the upper mold into the drawer(see below picture), and the mold edge and the upper plate are overlapped.
4. The machine switches to manual mode. Press the “front and back” button to feed the lower mold into the machine.
5. Disconnect the air source, the upper and lower cylinders will slowly fall, and the guide post of the upper mold will extend into the lower mold, and the two will slowly close together.
6. After the upper and lower molds are closed, manually tighten the thumb screws as shown in the figure. Make sure the upper mold cannot move. After tightening, the air source is connected, the cylinder rises, the upper mold is separated, and the air source is disconnected again to check whether the upper mold and the lower mold can be closed. Repeat the operation once or twice to ensure that the upper and lower dies are smoothly closed before proceeding to the next step.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2008
Total Annual:
400,000.00-500,000.00
Employee Number:
40~60
Ecer Certification：
Verified Supplier
Factory established in 2005, has built and maintained its reputation as a source of technical and professional excellence. Winsmart has a driven, experienced, and knowledgeable team, providing extensive array of solutions for PCB depaneling and soldering. Above all, it takes pride i... Factory established in 2005, has built and maintained its reputation as a source of technical and professional excellence. Winsmart has a driven, experienced, and knowledgeable team, providing extensive array of solutions for PCB depaneling and soldering. Above all, it takes pride i...
Get in touch with us
Leave a Message, we will call you back quickly!