ShenZhen YES Electronics Machinery Co.,Ltd
| Payment Terms | T/T, L/C, Western Union, MoneyGram |
| Supply Ability | 300 sets per month |
| Delivery Time | 1-5 days per month |
| Packaging Details | Each set be packed in plywood case |
| Mode | Laser tv repair machine |
| Type | Thermode Bonding |
| Control | programing |
| work pressure: | 0.5 ~ 0.7 Mpa |
| Pulse | Q-Switch 5n /seconds |
| Hot Bar Bonding | TAB |
| Brand Name | YES |
| Model Number | YESSH |
| Certification | CE ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Hot Bar Bonding LCD TV Panel Repair Machine 50Hz 1200W PLC Control
Tab Bonding Machine LCD Repairing 100 Inch TV 45Psi - 75Psi Working Pressure
Thermode ACF Bonding Machine Servo Control Stepper Motor Drive
Two CCD Camera TAB COF LCD Bonding Machine For 12 - 100 Inch LCD TV Panel
Product Specification
| Payment Terms | T/T, L/C, Western Union, MoneyGram | Supply Ability | 300 sets per month |
| Delivery Time | 1-5 days per month | Packaging Details | Each set be packed in plywood case |
| Mode | Laser tv repair machine | Type | Thermode Bonding |
| Control | programing | work pressure: | 0.5 ~ 0.7 Mpa |
| Pulse | Q-Switch 5n /seconds | Hot Bar Bonding | TAB |
| Brand Name | YES | Model Number | YESSH |
| Certification | CE ISO | Place of Origin | China |
| High Light | tab bonding machine lcd repairing ，lcd bonding machine | ||
Laser TV LCD Repair Machine With High Precision Repair And Computer Programing
Laser LCD TV Panel Repair Machine introduction
LCD laser repair machine (referred to as laser machine) on the LCD screen repair industry accounted for the high-end repair technology, the most high-end technology of LCD screen repair, LCD screen repair industry in addition to the COF loose welding, TAB char (This error can be repaired with a binding machine) Others such as ITO break, short line, bright line, half-line, dotted line, a multi-line laser machine can be used to repair. Laser machine with high efficiency, fixed rate, low cost (the same fault in the laser machine does not need replacement parts, (and do not affect the repair rate), it is widely used as the main device screen repair of large-scale production factory,after sale and service company.
Main purpose
Laser repair purposes, is hoping to further the defective part to be corrected, so that the original filter out waste products to be discarded, repair to an acceptable product. The current acceptable product standards----Firstly is definitely not wired defects; secondly, many products are "no highlights assurance". Secondly, many products are "no highlights assurance", so the pixel can not have been glowing are bright spots, but to some extent accepted few dark spots. Therefore, the object of laser repair, based on the main line defect and highlights.
The way of laser repair :Welding---- In the two story metal overlap over the place, in appropriate energy and wavelength of the laser can be metalized open and welded together, let the two originally not connected electrodes connected (and cut off to achieve disconnect)to repair.
Specification
| For LCD panel screen size | maximum 110 inch (orbital platform can be expanded) |
| For LCD panel screen thick | 0.3~2.2mm |
| Repair Area | Point (3um X 3um), Line (L 50um X 3um), Blocks (50um X 50um) Patch To repair the mist of polarizing film containing the LCD panel |
| Image system | Image photographed, archive and upload Dual display electronic brake light red and red box Light gate size and the parameters of the lens ratio and laser power storage and use |
| Working environment temperature | 20℃~30℃±5℃ |
| Work environment relative humidity | 65 + / - 5% RH |
| Laser System | |
| Wave length | 1064/532 nm double wavelength (532 nm for adjust the optical wavelength) |
| Pulse | Q-Switch 5n /seconds |
| Laser power | 3-8mJ/Pulse |
| Vibration frequency | 1 ~ 20 Hz/seconds |
| Maximum peak power | 1mW |
| Objective switching system | Mitutoyo 4 hole/electric switch mode (linear) Precision optical lens group |
| Output | 21.0uJ |
| Operating Mode | Electronic control |
| Adjust range | ± 10μm |
| Light Mode | Long/square is adjustable |
| Working platform | |
| Working platform size | 1250mm*900mm |
| Z axis range | 100 mm |
| Operating Mode | XY axis manual , Z axis manual |
| Optical imaging system | |
| Microscope/laser processing special type | CCD 1/2”color CCD |
| Episcopic light source | halogen light source system of high brightness (100W) |
| Transmission light source | halogen light source system of high brightness (150W) |
| Guide Light | halogen light source system of high brightness (100W) |
| Objective lens switching system 4 holes/Electric switchable type(linear) | Precision lens group 5 times/10 times/20 times/50 times/ |
| Electrical specifications | |
| Input power | AC power 220V , 50~60Hz, 30A |
| Air pressure | 0.4 MPa |
| Warranty | 1 year ( not include the consumable parts ) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Year Established:
2008
Total Annual:
1000000-5000000
Employee Number:
100~500
Ecer Certification：
Active Member
YES was founded by Jack and Alex Lee who both have more than 8 years experience in cost-saving Machinery Service in 2008. Our clients operate in a wide variety of markets, which we serve successfully for over many years. We are a one-stop machine provider and provide high qual... YES was founded by Jack and Alex Lee who both have more than 8 years experience in cost-saving Machinery Service in 2008. Our clients operate in a wide variety of markets, which we serve successfully for over many years. We are a one-stop machine provider and provide high qual...
Get in touch with us
Leave a Message, we will call you back quickly!