China World Technology Medical Equipment Service Group
| Payment Terms | T/T, Western Union,Paypal |
| Delivery Time | 3-5 working days |
| Packaging Details | Carton |
| Product Name | Drager Pressure Difference Flow Sensor 8412034 Original New For Use With Oxylog 2000 Oxylog 3000 Oxylog 2000 Plus Oxylog 3000 Plus |
| Brand | Drager |
| Part No | 8412034 |
| MOQ | One piece |
| Application for | Oxylog 2000 Oxylog 3000 Oxylog 2000 Plus Oxylog 3000 Plus Ventilator |
| Color | Light Yellow |
| Material | Plastic |
| Quantity | 1 |
| Warranty | 90 days |
| Condition | Original New |
| Brand Name | Drager |
| Model Number | 8412034 |
View Detail Information
Explore similar products
Mindray ECG Leadwires EL6802A 12-Lead Limb Cable IEC Clip PN0010-30-42903 For
TS-W-D Patient Monitor Accessories GE Ohmeda TruSignal 9 Pin Spo2 Wrap Sensor
CBL 3 Lead ECG Safety Patient Trunk Cable IEC PN M1510A Ref 989803103871 for
M1024254 GE Pediatric Reusable Temperature Probes 400 Series Skin Probe 3m 10ft
Product Specification
| Payment Terms | T/T, Western Union,Paypal | Delivery Time | 3-5 working days |
| Packaging Details | Carton | Product Name | Drager Pressure Difference Flow Sensor 8412034 Original New For Use With Oxylog 2000 Oxylog 3000 Oxylog 2000 Plus Oxylog 3000 Plus |
| Brand | Drager | Part No | 8412034 |
| MOQ | One piece | Application for | Oxylog 2000 Oxylog 3000 Oxylog 2000 Plus Oxylog 3000 Plus Ventilator |
| Color | Light Yellow | Material | Plastic |
| Quantity | 1 | Warranty | 90 days |
| Condition | Original New | Brand Name | Drager |
| Model Number | 8412034 | ||
| High Light | Oxylog 3000 Flow Sensor ，Oxylog 2000 Flow Sensor ，Drager Flow Sensor | ||
Drager Pressure difference Flow Sensor 8412034 Original New For use with Oxylog 2000 Oxylog 3000 Oxylog 2000 plus Oxylog 3000 plus
Note To reduce the risk of infection for hospital staff and patients, the flow sensor must be cleaned and disinfected after use. Use protective clothing, goggles, etc. - Follow the hygiene rules of the hospital. - Reprocess the flow sensor after each patient use. The reprocessing recommendations do not exempt personnel from observing the hygiene requirements and occupational health and safety guidelines for reprocessing medical products. To ensure professional reprocessing of medical products, the recommendations of the Robert Koch Institute document "Hygiene requirements for reprocessing medical products" or the relevant national or local hygiene regulations must be followed.
Assembly and disassembly of the flow sensor using the reusable hose system of the Oxylog device
► Assembly
1 Slide the flow sensor (A) over the breathing valve (B). Make sure that the flow sensor slot (A) and the breather valve (B) tab are correctly aligned.
2 Slide the angled connector (C) over the flow sensor (A).
3 Connect the flow measuring hose (D) to the flow sensor nozzle (A). When connecting the flow measuring hose, be careful that the hose and nozzle have different diameters.
► Disassembly
1 Disconnect the flow sensor (A) from the breather valve (B).
2 Remove the flow measurement hose (D) from the flow sensor (A).
Note Do not twist or apply force when removing the breather valve and flow measurement hose from the flow sensor. This may damage the flow sensor.
3 Remove the angled connector (C) from the flow sensor (A).
Manual cleaning
Hand washing is best done with running water or a commercially available mild alkaline detergent. Performing manual cleaning
1 Wash off any visible dirt under running water.
2 Use the detergent according to the manufacturer's instructions. Make sure that all surfaces to be cleaned are cleaned effectively. Place the flow sensor in a bubble-free solution for approximately 20 minutes. Stir the flow sensor well in the solution at the beginning and end of storage. Wash the flow sensor connector several times with a solution such as a syringe.
3 Rinse the garment under running water until no traces of detergent are visible.
4 Check for visible dirt or damage. Repeat manual cleaning if necessary.
Specification of Drager Pressure difference Flow Sensor 8412034 Original New For use with Oxylog 2000 Oxylog 3000 Oxylog 2000 plus Oxylog 3000 plus
| Product Name | Drager Pressure difference Flow Sensor 8412034 Original New For use with Oxylog 2000 Oxylog 3000 Oxylog 2000 plus Oxylog 3000 plus
|
| Brand | Drager |
| Part No | 8412034 |
| Application for | Oxylog 2000 Oxylog 3000 Oxylog 2000 plus Oxylog 3000 plus Ventilator |
| MOQ | One piece |
| Condition | Original new |
Thank you so much for your attention .If you're interested in Drager Pressure Difference Flow Sensor 8412034 Original New For Use With Oxylog 2000 Oxylog 3000 Oxylog 2000 Plus Oxylog 3000 Plus,feel free to contact us .Thank you .
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification：
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!