China World Technology Medical Equipment Service Group
| Payment Terms | full before shipment |
| Delivery Time | 3-5 working days |
| Packaging Details | Carton |
| Product Name | OOM102-1 OOM202 OOM201 Envitec Oxygen Sensor O2 Sensor |
| Brand | Envitec |
| Part Number | OOM102-1 OOM202 OOM201 |
| Warranty | 90 days |
| MOQ | one piece |
| Delivery Method | DHL ,UPS ,Fedex |
| Condition | New and original |
| Brand Name | Envitec |
| Model Number | OOM102-1 OOM202 OOM201 |
| Certification | CE |
View Detail Information
Explore similar products
Imec12 Icu Mindray Portable MultiParameter Patient Monitor Repair For Adult
12.1 Inch 5 Parameter Patient Monitor , Dash3000 Healthcare Monitoring System
Hospital PHiliph MP5 Patient Monitor Repair 2560×1440 Definition
Dash 4000 Monitoring Machine In Icu Bedside Monitor With 12.1in LCD Reconditione
Product Specification
| Payment Terms | full before shipment | Delivery Time | 3-5 working days |
| Packaging Details | Carton | Product Name | OOM102-1 OOM202 OOM201 Envitec Oxygen Sensor O2 Sensor |
| Brand | Envitec | Part Number | OOM102-1 OOM202 OOM201 |
| Warranty | 90 days | MOQ | one piece |
| Delivery Method | DHL ,UPS ,Fedex | Condition | New and original |
| Brand Name | Envitec | Model Number | OOM102-1 OOM202 OOM201 |
| Certification | CE | ||
| High Light | OOM102-1 Cell Sensor ，OOM202 Cell Sensor ，OOM102 Cell Sensor | ||
OOM102-1 OOM102 OOM202 OOM201 Envitec Oxygen Cell Sensor 100% Genuine New
The EnviteC medical oxygen sensor is designed to be used as the oxygen sensor component of the oxygen analyzer to measure the oxygen concentration in the following breathing gas mixture
application:
Sensing device for oxygen in
• Oxygen concentrator control device
• Medical ventilator
• Anesthesia equipment
• Incubator.
Use is limited to system monitoring. The sensor is not suitable for breath analysis of breathing gas. Please refer to
To the instructions for use! If the sensor is going to be replaced
The original oxygen sensing component of the oxygen analyzer,
Please refer to the EnviteC XRL cross-reference list to select
The right sensor
Technical Specifications OOM202
| Model Number | OOM202 |
| Nominal Sensor Lifetime | 250000 Percent Volume Oxygen Hours |
| Electrical Interface | Gold Plated Slip Rings |
| Output Signal in Air | 170A - 230A No Temperature Compensation |
| Response Time T 90% | Less Than 12 Seconds |
| Weight | Approx. 28 Grams |
| Usage | Hospital |
Technical Specifications OOM102-1 OOM102
| Model / Part Number | OOM102-1 |
| Target gases | OXYGEN |
| Measuring Range | 0-100% |
| Operating Voltage | 5V |
| Oxygen Pressure Range | 2 bar |
Technical Specifications OOM201
| Measurement range | 0 % ... 100 % oxygen (at atmosPHiliphhiliperic pressure) |
| Nominal sensor lifetime | ≥ 500 000 % volume oxygen hours |
| Output in ambient air | 14 mV ... 20.7 mV (Dual Cathode), load 600 Ohms |
| Electrical interface | Gold plated slip rings |
| Accuracy | meets ISO 80601-2-55 requirements |
| Repeatability | < 1 % volume O2 at constant temperature and pressure |
| Linearity error | < 3 % relative |
| Response time | < 12 s to 90 % of final value |
| Zero offset voltage | < 200 µV in 100 % nitrogen, applied for 5 min |
| Cross interference | meets ISO 80601-2-55 requirements |
| Influence of humidity | -0.03 % rel. per % RH at 25 °C |
| Pressure range | 0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2 ) |
| Influence of pressure | proportional to change in oxygen partial pressure |
| Influence of mechanical shock | < 1 % relative after a fall from 1 m |
| Operating temperature | 0 °C ... +50 °C |
| Temperature compensation | no temperature compensation |
| Operating humidity | 0 % ... 99 % RH non-condensing |
| Long term output drift | < 1 % volume oxygen per month typically < -15 % relative over lifetime |
| Storage temperature | -20 °C ... +50 °C |
| Recommended storage | +5 °C … +15 °C |
| Recommended load | ≥ 10 kOhms |
| Warm-up time | < 30 minutes, after replacement of sensor |
| Weight | approximately 28 grams |
| Part number | 01-00-0014 |
Mechanical drawing (All dimension in mm)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification：
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!