Lifepak 20E LP20e Defibrillator Machine Parts Med-tronic PHiliphysio Control

Product Specification

Lifepak 20E LP20e Med-tronic PHiliphhilipysio Control Lithium-Ion Internal Battery PART NO 3205296-004

Types of Batteries

AC power is the main power source of the device.

There is a spare battery in the bottom case.

■ LIFEPAK 20 defibrillator/monitor uses 10 sections of nickel metal hydride

(NiMH batteries.

■ LIFEPAK 20e defibrillator/monitor uses 9-cell lithium ion (Li-ion)

Battery.

warn!

If a non-PHiliphhilipysio-Control battery is used, the LIFEPAK 20e defibrillator/monitor battery will not charge or may not charge properly.

This battery cannot be used as the main power source. If the main power source is removed, due to a power outage or other reasons, the backup battery will power the device for at least two hours. The device also has a button battery that can provide continuous power accessories for the internal clock and other devices. The service life of this battery is five years. It is not rechargeable and should be replaced at the end of its life.

Charging the Backup Battery

The LIFEPAK 20 defibrillator/monitor has a built-in high-current charger that can charge a fully discharged backup battery in approximately two hours

When AC power is connected to the device. The charger will not charge the battery until one week after the battery was last fully charged, or until the battery is disconnected and then reconnected.

The LIFEPAK 20e defibrillator/monitor has a built-in constant current and constant voltage charger, which can charge a fully discharged backup battery in approximately four hours when the AC power supply is connected to the device. The charger will not charge the battery until the state of charge of the lithium-ion battery drops below 85%.

Note: The LIFEPAK 20e defibrillator/monitor will only start battery charging when the battery pack temperature is below 40°C. If a large number of defibrillator shocks are applied to the device under high ambient temperature, the battery will not start charging immediately.

When to Order a Replacement Battery

Our batteries will not last forever, and knowing when to replace them is a key part of preparing for rescue in an emergency. Most batteries contain three dates:

• Production date: The production date of the battery. Some must be used within a certain production time frame.
• Installation date: If your battery has one of these dates, it must be installed before the specified time to maintain the expected service life.
• Expiration date: Once this date is reached, the battery may be exhausted or almost exhausted and needs to be replaced.

Although many models automatically check their battery capacity to ensure they can be used, it is also best to manually track these dates. We also recommend that you always prepare an additional AED battery for your device.

After installing new batteries, please recycle old batteries . If you need help finding a suitable replacement battery for your device, please read our replacement guide or contact our customer service team for assistance.