China World Technology Medical Equipment Service Group
| Payment Terms | Full before shipment |
| Delivery Time | 3-5 working days |
| Packaging Details | Carton |
| Product Name | GE |
| Part No | 2016998-001 |
| Use for | 400 Series |
| Probe length | 50cm(20 inch) |
| Condition | New |
| Warranty | 90 days |
| MOQ | One piece |
| Payment Method | T/T ,Paypal , western union |
| Delivery Method | DHL,UPS ,Fedex ,etc |
| Brand Name | GE |
| Model Number | 2016998-001 |
View Detail Information
Explore similar products
TS-W-D Patient Monitor Accessories GE Ohmeda TruSignal 9 Pin Spo2 Wrap Sensor
CBL 3 Lead ECG Safety Patient Trunk Cable IEC PN M1510A Ref 989803103871 for
M1024254 GE Pediatric Reusable Temperature Probes 400 Series Skin Probe 3m 10ft
11141-000 10011141-000156 Patient Monitor Accessories Black Med-tronic Lifepak
Product Specification
| Payment Terms | Full before shipment | Delivery Time | 3-5 working days |
| Packaging Details | Carton | Product Name | GE |
| Part No | 2016998-001 | Use for | 400 Series |
| Probe length | 50cm(20 inch) | Condition | New |
| Warranty | 90 days | MOQ | One piece |
| Payment Method | T/T ,Paypal , western union | Delivery Method | DHL,UPS ,Fedex ,etc |
| Brand Name | GE | Model Number | 2016998-001 |
| High Light | 2016998-001 Temperature Adapter Cables ，20 Inch Temperature Adapter Cables ，50cm Temperature Adapter Cables | ||
2016998-001 GE Dual Reusable Temperature Adapter Cables For 400 Series ,50cm(20 Inch)
Two temperatures are measured by two functions. It ensures the alarm of the patient with adjustable high and low temperature limits. There are system alarms for sensor and calibration errors.
The temperature connector and measurement circuit are used in conjunction with the cardiac output monitor function. So you cannot use both functions at the same time. The signal in the patient cable indicates proper operation.
Temperature calibration
NOTE: For the temperature calibration, separate, accurate test plugs (25 °C and 45 °C) are needed. A test set of two plugs is available from GE Healthcare, order code 884515-HEL. A Dual temperature adapter cable, order code 2016998-001 is also required for the temperature calibration. Calibrate the temperature, when the measured test values differ for more than ±0.1 °C, and always after STP board replacement.
1. Enter the STP service menu. (Monitor Setup - Install/Service (password 16-4-34) - Service (password 26-23-8) - Parameters).
2. Enter Calibrations menu.
9. Choose Protection ON in protect mode
GE Dual Reusable Temperature Adapter cables for 400 series ,50cm(20 inch) 2016998-001 specification
| Product Name | GE Dual Reusable Temperature Adapter cables for 400 series ,50cm(20 inch) 2016998-001 |
| Brand | GE |
| Part No | 2016998-001 |
| Use for | 400 Series |
| Probe length | 50cm(20 inch) |
Temperature test producer
1. Set the temperature output of the patient simulator to 37° C.
2. Connect the temperature adapter cable to the TEMP/CO connector of the patient monitor.
3. Set the switch on the temperature adapter to the 400 or 700 position according to customer preference.
4. Connect the 400 or 700 series temperature output connector of the patient simulator to the T1 connector of the temperature adapter.
5. Check that the TEMP parameter window appears on the patient monitor display with a T1 reading of 37.0° ± 0.4° C.
6. Move the temperature simulator cable from the T1 connector of the temperature adapter to the T2 connector of the temperature adapter.
7. Check that the T2 reading in the TEMP parameter window on the patient monitor display is 37.0°±0.4°C
Two temperatures are measured by two functions. It ensures the alarm of the patient with adjustable high and low temperature limits. There are system alarms for sensor and calibration errors.
The temperature connector and measurement circuit are used in conjunction with the cardiac output monitor function. So you cannot use both functions at the same time. The signal in the patient cable indicates proper operation.
Temperature calibration
NOTE: For the temperature calibration, separate, accurate test plugs (25 °C and 45 °C) are needed. A test set of two plugs is available from GE Healthcare, order code 884515-HEL. A Dual temperature adapter cable, order code 2016998-001 is also required for the temperature calibration. Calibrate the temperature, when the measured test values differ for more than ±0.1 °C, and always after STP board replacement.
1. Enter the STP service menu. (Monitor Setup - Install/Service (password 16-4-34) - Service (password 26-23-8) - Parameters).
2. Enter Calibrations menu.
9. Choose Protection ON in protect mode
GE Dual Reusable Temperature Adapter cables for 400 series ,50cm(20 inch) 2016998-001 specification
| Product Name | GE Dual Reusable Temperature Adapter cables for 400 series ,50cm(20 inch) 2016998-001 |
| Brand | GE |
| Part No | 2016998-001 |
| Use for | 400 Series |
| Probe length | 50cm(20 inch) |
Temperature test producer
1. Set the temperature output of the patient simulator to 37° C.
2. Connect the temperature adapter cable to the TEMP/CO connector of the patient monitor.
3. Set the switch on the temperature adapter to the 400 or 700 position according to customer preference.
4. Connect the 400 or 700 series temperature output connector of the patient simulator to the T1 connector of the temperature adapter.
5. Check that the TEMP parameter window appears on the patient monitor display with a T1 reading of 37.0° ± 0.4° C.
6. Move the temperature simulator cable from the T1 connector of the temperature adapter to the T2 connector of the temperature adapter.
7. Check that the T2 reading in the TEMP parameter window on the patient monitor display is 37.0°±0.4°C
8.Remove the temperature adapter and temperature simulator cable from the patient monitor and patient simulator.
If you're interested in 2016998-001 GE Dual Reusable Temperature Adapter Cables For 400 Series ,50cm(20 Inch) ,feel free to contact us .Thank you.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification：
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!