Payment Terms | T/T, Western Union |
Packaging Details | Carton |
Tag Protocol | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C |
Working Frequency | 840~960MHz |
Communication Interface | USB、RS232、RS485、Ethernet |
Antenna interface | Four TNC |
Buzzer | support |
GPIO interface | 3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer |
DRM mode | support |
Brand Name | sunshine |
Model Number | F5860 |
Certification | CE,ROSH |
Place of Origin | CHINA |
View Detail Information
Explore similar products
Waterproof Mid Range RFID Reader / Integrated RFID Reader For Parking System
IMPINJ R2000 RF Chips Long Distance RFID Reader For Warehousing Application
4 Port RFID Reader Long Distance ,Wifi RFID Reader 840~960 MHz Working Frequency
Four Port 8dbi Antenna UHF Long Range RFID Reader With Wifi Easy Installation
Product Specification
Payment Terms | T/T, Western Union | Packaging Details | Carton |
Tag Protocol | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C | Working Frequency | 840~960MHz |
Communication Interface | USB、RS232、RS485、Ethernet | Antenna interface | Four TNC |
Buzzer | support | GPIO interface | 3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer |
DRM mode | support | Brand Name | sunshine |
Model Number | F5860 | Certification | CE,ROSH |
Place of Origin | CHINA | ||
High Light | rfid long distance reader ,long range rfid reader module |
Long Distance Four Port RFID Reader WIFI 840~960 MHz Working Frequency
Product Advantage
Technical parameters
Name | Parameters | Remark |
Reader Chip | R2000 | |
Tag Protocol | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C | |
Working Frequency | 840~960MHz | |
Supporting Working Area | China, Europe, the United States, South Korea, Japan, Taiwan…… | |
Operating Voltage | 12V | DC power supply |
Maximum operating current | 1A | Test of transmit power in 30dBm state |
Standby current | ≤80mA | |
RF port maximum output power | 1W(30dBm) | |
Working Temperature | -25℃~+65℃ | |
Working Humidity | ≤95%(+25℃) | |
Storage Temperature | -40℃~+80℃ | |
Receiving | -82dBm | |
Antenna interface impedance | 50Ω | |
Serial communication parameters | Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8 ,stop bit:1 | |
Power output settings | 5~30dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm) | |
DRM mode | support | |
RSSI | support | |
High temperature automatic protection function | support | |
Power supply enable | support | |
GPIO interface | 3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer
| |
buzzer | support | |
LED lights | Power indicator: Red Status indicator: Green | |
Communication Interface | USB,RS232,RS485,Ethernet | Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time. |
Antenna interface | Four TNC | The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time. |
dimension | 26.5*25.0*4.5CM(including bracket) | |
Accessories | 12V/3A Power Adapter:1 Serial line: 1 root |
PIN Green Terminal Interface Definition
Pin NO. | Name | Description | Remark |
1 | 485-B | RS485 B | |
2 | 485-A | RS485 A | |
3 | EN_OUT | Equipment enable control interface,When the high level input, the device will be in a state of sleep.The high level voltage is 5V. | |
4 | GPIO1 | GPIO port output, can be programmed to control the level of output.The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V) | |
5 | GPIO2 | the same as above | |
6 | GPIO3 | the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control) | |
7 | NC | Reserved interface, no function | |
8 | NC | Reserved interface, no function | |
9 | WIFI_RESET | Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI. | |
10 | GND | Signal reference. |
FAQ
1. Q: Are you manufacturer?
A: Yes. We are of course manufacturer with our own R&D team and factory in shenzhen.
2. Q: Can you provide application software for the hardware?
A: We provide free SDK and User manual of all API to support your development or programming.
3. Q: What is the warranty?
A: The warranty time is 1 year without man-made damage.
3. Q: Does the device have the language default as English?
A: Of course, our device supports multi-language such as English,Spanish, Portuguese ,French, German,Polish,Japanese, Russian and so on.
4. Q: Can your device install the Android Apps that our customers provide?
A: No problem. Just send us your Apps which you need to get the liscense of the apps and then our Engineers can do that for you.
If you have any other question about our products,please don’t hesitate to contact us.We will be more than happy to serve you.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
1000000-3000000
Employee Number:
100~200
Ecer Certification:
Active Member
SUNSHINE RFID Technology Co.,Limited is a high-tech enterprise specializing in the development, manufacture and sales of top quality UHF RFID products and active RFID products. We focus on the development and sales of UHF RFID modules, readers and tags, and 2.45GHz RFID readers, tags, etc. We s... SUNSHINE RFID Technology Co.,Limited is a high-tech enterprise specializing in the development, manufacture and sales of top quality UHF RFID products and active RFID products. We focus on the development and sales of UHF RFID modules, readers and tags, and 2.45GHz RFID readers, tags, etc. We s...
Get in touch with us
Leave a Message, we will call you back quickly!