SUNSHINE RFID Technology Co.,Limited
| Payment Terms | T/T, Western Union |
| Packaging Details | Carton |
| Tag Protocol | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C |
| Working Frequency | 840～960MHz |
| Communication Interface | USB、RS232、RS485、Ethernet |
| Antenna interface | Four TNC |
| GPIO interface | 3-Road GPIO can only input can not be input，GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer |
| Receiving | -82dBm |
| Reader Chip | R2000 |
| RSSI | support |
| Brand Name | sunshine |
| Model Number | F5860 |
| Certification | CE,ROSH |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Long Distance RFID Multi Reader , Four Port RFID Reader Multiple Tags With
Long Detection Distance 4 Port RFID Reader For Vehicle Rfid Management System
UHF Fixed 4 Port RFID Reader Access Control With Stm32 Main Control Chip
4 Channels 4 Port RFID Reader , Low Power RFID Reader Industrial With 8dbi
Product Specification
| Payment Terms | T/T, Western Union | Packaging Details | Carton |
| Tag Protocol | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C | Working Frequency | 840～960MHz |
| Communication Interface | USB、RS232、RS485、Ethernet | Antenna interface | Four TNC |
| GPIO interface | 3-Road GPIO can only input can not be input，GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer | Receiving | -82dBm |
| Reader Chip | R2000 | RSSI | support |
| Brand Name | sunshine | Model Number | F5860 |
| Certification | CE,ROSH | Place of Origin | CHINA |
| High Light | multi tag rfid reader ，fixed uhf rfid reader | ||
Support Multi-tag Reading 4-Port Fixed RFID Reader UHF With Impinj Module
Product Advantage
Technical parameters
| Name | Parameters | Remark |
| Reader Chip | R2000 | |
| Tag Protocol | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C | |
| Working Frequency | 840～960MHz | |
| Supporting Working Area | China, Europe, the United States, South Korea, Japan, Taiwan…… | |
| Operating Voltage | 12V | DC power supply |
| Maximum operating current | 1A | Test of transmit power in 30dBm state |
| Standby current | ≤80mA | |
| RF port maximum output power | 1W(30dBm) | |
| Working Temperature | -25℃～+65℃ | |
| Working Humidity | ≤95%(+25℃) | |
| Storage Temperature | -40℃～+80℃ | |
| Receiving | -82dBm | |
| Antenna interface impedance | 50Ω | |
| Serial communication parameters | Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8 ,stop bit:1 | |
| Power output settings | 5～30dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm) | |
| DRM mode | support | |
| RSSI | support | |
| High temperature automatic protection function | support | |
| Power supply enable | support | |
| GPIO interface | 3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer | |
| buzzer | support | |
| LED lights | Power indicator: Red | |
| Communication Interface | USB,RS232,RS485,Ethernet | Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time. |
| Antenna interface | Four TNC | The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time. |
| dimension | 26.5*25.0*4.5CM(including bracket) | |
| Accessories | 12V/3A Power Adapter:1 |
PIN Green Terminal Interface Definition
| Pin NO. | Name | Description | Remark |
| 1 | 485-B | RS485 B | |
| 2 | 485-A | RS485 A | |
| 3 | EN_OUT | Equipment enable control interface,When the high level input, the device will be in a state of sleep.The high level voltage is 5V. | |
| 4 | GPIO1 | GPIO port output, can be programmed to control the level of output.The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V) | |
| 5 | GPIO2 | the same as above | |
| 6 | GPIO3 | the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control) | |
| 7 | NC | Reserved interface, no function | |
| 8 | NC | Reserved interface, no function | |
| 9 | WIFI_RESET | Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI. | |
| 10 | GND | Signal reference. |
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF
Q4. How about your delivery time?
A: Generally, it will take 3-7 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
1000000-3000000
Employee Number:
100~200
Ecer Certification：
Active Member
SUNSHINE RFID Technology Co.,Limited is a high-tech enterprise specializing in the development, manufacture and sales of top quality UHF RFID products and active RFID products. We focus on the development and sales of UHF RFID modules, readers and tags, and 2.45GHz RFID readers, tags, etc. We s... SUNSHINE RFID Technology Co.,Limited is a high-tech enterprise specializing in the development, manufacture and sales of top quality UHF RFID products and active RFID products. We focus on the development and sales of UHF RFID modules, readers and tags, and 2.45GHz RFID readers, tags, etc. We s...
Get in touch with us
Leave a Message, we will call you back quickly!