Ningbo Anyo Import & Export Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 100000 per day |
| Delivery Time | 8-10 work days |
| Packaging Details | Customized carton |
| Other name | PCB connector |
| Poles | 2 ~ 20P |
| Current rating | 3A |
| Voltage rating | 250V |
| Temperature range | -25℃～+85℃ |
| Contact resistance | ≤10mΩ |
| Brand Name | ANYO |
| Model Number | XH |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Plastic Height 8.5mm Small Electrical Connectors 2.54mm Single Row Straight
Dual Row Female Header Small Electrical Connectors 180°With Plastic Height 8.5mm
Triple Row 2.54mm Female Header Socket 180° With Plastic Height 8.5mm
Black Through Hole Male Socket / 2.54mm Straight Male Box Header Connector
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100000 per day |
| Delivery Time | 8-10 work days | Packaging Details | Customized carton |
| Other name | PCB connector | Poles | 2 ~ 20P |
| Current rating | 3A | Voltage rating | 250V |
| Temperature range | -25℃～+85℃ | Contact resistance | ≤10mΩ |
| Brand Name | ANYO | Model Number | XH |
| Place of Origin | CHINA | ||
| High Light | aviation wire connectors ，mono headphone jack | ||
Wire to board PCB connector XH type 2.50mm, harness wire connector
Specification:
| Poles | 2~20P |
| Current rating | 3A AC,DC |
| Voltage raing | 250V AC,DC |
| Temperature range | -25℃～+85℃ |
| Contact resistance | ≤10mΩ |
| Insulation resistance | ≥1000MΩ |
| Withstand voltage | 1000VAC/minute |
| Applicable wire | AWG #30 to #22 |
Performance test:
| Item | Test condition | Requirements | ||
| 1 | Appearance | Visual by eye Light: >1.0 Lamp: 200~300Lx Space: 0.3~0.5m | 1. Plastic part:smooth and flat surface without discolor,broken,crack distortion defects is acceptable. 2.Metal part:btight and even surface without rust,oxide,fog and obvious physical damage defects is acceptable. 3.Wire:clearing surface without discolor,broken defects,indistinct words and mark is acceptable. | |
| 2 | Contact resistance | Mate connectors,measure by dry circuit. | 10mΩ MAX | |
| 3 | InsuIation Resistance | Apply 500V DC between adjacent terminal or ground. | 1000MΩ MIN | |
| 4 | Dielectric Strength | Mate connectors,apply 500V AC for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 5 | Crimping Pull Out Force | Fix the crimped terminal,apply axial pull out force on the wire at the speed rate of not more 25mm/min. | AWG.22# 30N MIN AWG.24# 20N MIN AWG.26# 15N MIN AWG.28# 10N MIN AWG.30# 8N MIN | |
| 6 | Terminal/Housing Retention Force | Apply axial pull out force at the speed rate of not more 25mm/min on the pin assembled in the housing. | 15N MIN | |
| 7 | Pin Retention Force | Apply axial push out force at the speed rate of not more 25mm/minute on the terminal assembled in the base. | 10N MIN | |
| 8 | Solderability | Soldering time: 2±0.5 second Solder Temperature:240℃±5℃ | 90% of immersed area must show no voids,pin holes | |
| 9 | Resistance to Soldering Heat | Soldering time: 2±0.5 second Solder Temperature:260℃ | Appearance | No Damage |
| 10 | Heat Resistance | Mated connectors are exposed to a temperature of 85℃±2℃ for 96 hours. | Appearance LLCR | No Damage 20mΩ Max |
| 11 | Clod Resistance | Mated connectors are exposed to a temperature of -25℃±2℃ for 96 hours. | Appearance LLCR | No Damage 20mΩ Max |
| 12 | Temperature Rise | Carring rated current load. | Temperature Rise | 30℃ MAX |
| 13 | Humidity | Temperature:40±2℃ Relative Humidity:90%~95% Duration:96 hours | Appearance | No damage |
| Dielectric strength | 1000VAC/minute | |||
| Insulation Resistance LLCR | 1000MΩ MIN | |||
| 20mΩ MAX | ||||
| 14 | Temperature cycle | Mated connectors are exposed to 5 cycles of: a)-25°C±2°C 0.5hour b)+85°C±2°C 0.5hour | Appearance | No damage |
| Dielectric strength | 1000VAC/minute | |||
| Insulation Resistance LLCR | 1000MΩ MIN | |||
| 20mΩ MAX | ||||
| 15 | Vibration | Frequency:10~55Hz Amplitude:±1.5mm Frequency:>55~500Hz Acceleration:50m/s2 Duration:2 hours in each X,Y,Z axes | Appearance | No damage |
| Contact resistance | 20mΩ MAX | |||
| Intermittence | 1μsec MAX | |||
| 16 | Repeated insertion/ withdrawal | When mated up to 50 cycles repeatedly by the rate of 10 cycles per minute. | Appearance | No damage |
| Dielectric strength | 1000VAC/minute | |||
| Insulation | 1000MΩ MIN | |||
| Contact resistance | 20mΩ MAX | |||
| 17 | Salt spray | 16 hour exposure to a saltspray from the 5%±1 solution. | Appearance:No Damage(No erosion with material exposed.And with plating material,slight erosion on the cutting surface acceptable) | |
| 18 | Insertion and Withdrawal Force | Insertion and withdraw contact at the speed rate of 1mm/s~5mm/s. | Insertion(Max) | Withdrawal(Min) |
| 10N | 2.0N | |||
Dimension: (mm)
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2012
Total Annual:
1000000-2000000
Employee Number:
100~120
Ecer Certification：
Site Member
ANYO is the leading supplier of electronic components. We were established in 2012, based in Ningbo (Close to ShangHai). Before establishment, we were lawful chief representative of EMDAS ELEKTRONIK in Turkey. We always get the qualified products with fast, easy ordering, short delivery tim... ANYO is the leading supplier of electronic components. We were established in 2012, based in Ningbo (Close to ShangHai). Before establishment, we were lawful chief representative of EMDAS ELEKTRONIK in Turkey. We always get the qualified products with fast, easy ordering, short delivery tim...
Get in touch with us
Leave a Message, we will call you back quickly!