40W 2x2ft 595x595 600 X 600 Dimmable LED panel light , LED Square Panel Light

Product Specification

40w 2x2ft 600X600 595x595 Dimming LED panel light with color temperature and brightness dimmable

Features of CCT Dimmable LED Panel light

1.Variety control mode: Remote control, Panel Controller, Light Controller,Switch

2. Wireless remote control, distance more than 20 meters no meter obstacles

3. Segmented fast regulating, Stepless regulation slow

4. Scene mode, night light

5. Adjustable Dimmable light range between 3% and 100%

6. Open and close and the function of time switch 

7. Ordinary switch can be segmented regulation

8. Light source: Original Import SMD LEDs

9.Long LED life: More than 50,000 hours
10.LED panel light Function: Color Temperature Dimmable
11. LED panel light type: External isolated constant current driver
12.LED panel light Power factor:>0.95 No UV or IR light radiation
13.Eco-friendly,No mercury or other inorganics
14.Highest optical efficiency: 90-95 lumens per watt
15.Homogeneous flood illumination
16.Aluminum housing with excellent thermal efficiencies
17.The panel light is available in the following white color temperatures: 2800K~6500K
18. High grade light guide panel to assure high lighting uniformity over 92%
19. 40w LED panel light can achieve directional light output equal to traditional 80w grid lamp

Specifications of CCT Dimmable LED panel light:

Wireless remote and driver for color temperature and brightness dimmable:

 
Features
 

1.     Energy Saving. Saving 65%-70% electricity cost to traditional Panels.

2.     Advanced super longlife and stable driver.

3.     Professional thermal management.

4.     Instant on, no warm up time required.

5.     No noise, no flickering.

6.     No UV or IR radiation in the beam, mercury free.

7.     Anti-shock, anti-moisture.

8.     Aluminum alloy 6063 body and leading light transmitting Optical PMMA cover.

9.     Exquisite small appearance. Easy to install with mounting brackets.

10.   Eco-friendly. No mercury and harmful materials

                   
Photometric Information
 
 
                  4000K                                                                                           6000K  

 
 
Distribution curve flux:
 

 

User Guide Note:
 
Pls read the entire manual to fully understand and safe usely use this product.
The products anc be used at voltage of 100-277Vac,50/60Hz,suitable for indoor dry environment.
Specifications are subject to change without notice.pls visit www.LED-Panel-lights.com for the most recent user guide versions.
 
 
Unpacking

• Unpack and careful examine the product.
• Report any damage and save all packing material if any parts were damaged during transportation
• Do not attempt to use this apparatus if it is damaged.

Installation instructions
 
 
1)  Pls remove the protection film on the front of luminaire

• Consult a qualified electrician to ensure correct branch circuit conductor.
• The products should be installed and operated by qualified electrician or technician in accordance with relevant local codes.
• Rish of electric shock,ensure that main power source is off when wiring or soldering the sections of the product.

Maintenance

• Prior to cleaning the product,make sure it has been disconnected from power supply.
• Use a dry or slightly moistened cloth for cleaning
• Never use any chemical or abrasive materials for cleaning.

Installation considerations

• The product must be at a minimum distance of 20cm from any flammable material.
• The product must not be installed into ceilings or wall that contain heat-insulating materials.

Installation steps

• Built-in

• Turn off main power before wring.
• Remove the ceiling panel
• Connect the input and ground wires(bare end) of the driver box to the main power outlet.
• Connect male-female connector tightly on the panel and driver.
• Fix the flat led panel into the ceiling.