ShenzhenYijiajie Electronic Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Delivery Time | 3-5workingdays |
| Operating Principle | 3-electrode electrochemical |
| Measurement Range | 0-50 ppm H2S |
| Maximum Overload | 500 ppm H2S |
| Filter | None |
| Sensitivity* | 1.70 ± 0.30 μA/ppm |
| Response Time (T90)* | Response Time (T90)* |
| Model Number | 3HHLM |
| Place of Origin | UK |
View Detail Information
Explore similar products
H2S-AH Hydrogen Sulfide Sensor (High Current H2S Sensor) Is Used In Hydrogen
NH3-B1 Four Electrode Electrochemical Ammonia Sensor (NH3 sensor) Is Used In
H2S-B4 High Resolution Hydrogen Sulfide Sensor (H2S sensor) Is Used To Monitor
NO2-A1 Nitrogen Dioxide Sensor (Portable NO2 Sensor) For Nitrogen Dioxide
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Delivery Time | 3-5workingdays |
| Operating Principle | 3-electrode electrochemical | Measurement Range | 0-50 ppm H2S |
| Maximum Overload | 500 ppm H2S | Filter | None |
| Sensitivity* | 1.70 ± 0.30 μA/ppm | Response Time (T90)* | Response Time (T90)* |
| Model Number | 3HHLM | Place of Origin | UK |
| High Light | 3HHLM Gas Sensor for H2S ，3HHLM Gas Sensor for Methanol ，3HHLM Low Sensitivity Gas Sensor | ||
3HHLM Hydrogen Sulfide Sensor
The 3HHLM CiTiceL is designed for use in applications where methanol might be present. Whilst cross
sensitivity reactions on CiTiceLs are normally readily defined, the behavior of the 3HHLM when exposed to
methanol is significantly more complex, and can not be specified as above for carbon monoxide. The 3HH/LM
CiTiceL is the result of an extensive development project, which has achieved, for this application, a significant
performance advantage over standard 3HH CiTiceLs
CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important
that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments
and operation.
When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is
fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic.
| Baseline Offset (clean air)* | Baseline Offset (clean air)* |
| Maximum Zero Shift | 0.1 ppm H2S equivalent |
| Resolution | 0.1 ppm (when used with recommended electronics) |
| Repeatability | 1% of signal |
| Recommended Load Resistor | 10 Ω |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States HONEYWELL pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV se... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States HONEYWELL pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV se...
Get in touch with us
Leave a Message, we will call you back quickly!