ShenzhenYijiajie Electronic Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 1000 |
| Delivery Time | 5-8workingdays |
| Packaging Details | Standard Packing |
| Humidity measurement range | 0~100%rh |
| Temperature measurement range | -40～+123.8℃ |
| Humidity measurement accuracy | ±1.8%rh |
| Temperature measurement accuracy | ±0.3℃ |
| Response time | <8s |
| Low power consumption | (typ. 30μw) |
| Model Number | SHT75 |
| Place of Origin | China |
View Detail Information
Explore similar products
HTU20D(F) IC Based Humidity Temperature Sensor PNP Fully Calibrated Digital
HIH-4000-003 HVAC Temperature Sensor 200 µA Current Draw
HEL-705-U-1-12-00 Platinum RTD Humidity Temperature Sensor Thin Film
Integral HIH-4602-C Thermistor Humidity Sensor Temperature For Refrigeration
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 1000 |
| Delivery Time | 5-8workingdays | Packaging Details | Standard Packing |
| Humidity measurement range | 0~100%rh | Temperature measurement range | -40～+123.8℃ |
| Humidity measurement accuracy | ±1.8%rh | Temperature measurement accuracy | ±0.3℃ |
| Response time | <8s | Low power consumption | (typ. 30μw) |
| Model Number | SHT75 | Place of Origin | China |
| High Light | Pin Type Temperature And Humidity Sensor ，SHT75 Temperature And Humidity Sensor ，Soldered Humidity Temperature Sensor | ||
SHT75 Pin Type Temperature And Humidity Sensor Chip
The sht7x can be soldered using standard wave soldering. 20 seconds at a maximum temperature of 235°C. If manual soldering is used, the contact time should not exceed 5
seconds, the maximum temperature is 350°C. Note: After wave soldering, store the sensor at >75%rh for at least 12 hours to ensure that the polymer
of rehydration. Failure to do so will result in drift in sensor readings. The sensor can also be placed in a natural environment (humidity>40%rh) for more than 5 days
to rehydrate. In either case, whether manual soldering or reflow soldering, it is not permissible to rinse the board after soldering.
Datasheet:
| Model | SHT75 |
| Type | Humidity |
| Material | Mixture |
| Physical properties of the material | Semiconductor |
| Output signal | Digital |
| Sensitivity | ±1% |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States HONEYWELL pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV se... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States HONEYWELL pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV se...
Get in touch with us
Leave a Message, we will call you back quickly!