Heavy Duty Single Gantry Crane 10 Tons Capacity Free Maintenance Rate

Product Specification

Heavy Duty Electric Driven 10 tons Capacity Span 6m Lifitng Height 5m Single Girder Gantry Crane

Product application:

Single girder gantry crane with hook is applied outside warehouse or railway sideways to do common
lifting and unloading works.

This kind of crane is composed of bridge, supporting legs, crane travelling organ, trolley with strong
lifting winch, electric equipment and control system.

As its heavy duty design, it can be widely used in all kinds of industrial field. As its heavy duty design,
it can be widely used in all kinds of industrial field.

Gantry Crane:

Electric parts are packed by high quality plywood crate to reduce distortion in conveying;
2. Main beams, end beams and open winch are packed by plastic woven cloth. It can reduce abrasion when transport.
3. If the size of whole crane are suitable for container ship, usually by container; If the size is too big, usually by bulk ship or by container after truncation.

Features:

1) high reliability, safety, free maintenance rate;

a) work duty: FEM2M, M5

b) Protection class: IP55

c) Insulation class: F

d) continuing rate: 60% ( for the high class motor)

e) Cooling rate: 30% than normal crane

f) Over temperature protection: 170℃

2) compact design, small size, low dead weight, low headroom

3) Low noise

4) Investment-saved---the workshop’s civil work cost, due to crane’s light dead weight and low wheel pressure.

5) Power-saved. The total motor power is much lower than normal design.

Single Girder Gantry Crane

* Lifting capacity is 5 to 20 ton.

* Span is 12 to 30 meters

* Lifting height is 6 to 12m

* Appication: used at open or room ground and warehouses, yards etc.

Single Girder Truss Gantry Crane

* Lifting capacity is 5 to 20 ton.

* Span is 12 to 30 meters

* Lifting height is 6 to 12m

* Application: The best light crane, used both in multi-wind area and workshop for inside and outside.

Semi Gantry Crane

* Lifting capacity: 2 to 10 tons

* Span: 10~20m

* Lifting height is 6 to 12m

* Application: it could be used in outdoor or indoor warehouse for loading and unloading

(Single Girder) L type Gantry Crane

* Loading capacity is from 5 to 32t

* Span is from 12 to 30m

* Application: used in outdoor warehouse for loading and unloading

Product advantage:

1. Credible electric parts to guarantee the crane safety in operating.

2. Effective and optimization design minimize the self-weight and ensures safety, stability and intensity.

3. Low gravity, small wheel pressure, space saving and lifting weight upto 50t.

4. High strength, good rigidity, light weight and excellent material ensure stability and convenient operation.

5. Flexible driving, extensive adaption, excellent frequency conversion control, stable operation, low maintenance and easy replacement.

Environment:

1. Normal use in range of -25℃~40℃, average temperature mustn't exceed 35℃ inside 24 hours.

2. Other installation site altitude shall not exceed 2,000 meters and should check motor capacity when above 1000m.

3. Flammable,explosive and corrosive gas are forbidden in the work environment.

4. The crane is forbidden to lift fuse and blend deleterious article and flammable explosive article

Safety feature:

Automatic rectify deviation control
Weight overload protection device
Top quality polyurethane buffer
Phase protection
Lifting limit switch
Cross traveling limit switch
Long traveling limit switch
Voltage lower protection function
Emergency stop system
Current overload protection system
Lighting system
Light and alarm system

NOTICE:

As this kind of crane is customized, in order to offer you most suitable design and best solution, please confirm following information when you send inquiry.

1. Lifting capacity.

2. Span length.(rail center to rail center)

3. Lifting height.(hook center to ground)

4. Have you installed the rails? Do you need us supply the rails? How long is it?

5. Power supply: Voltage.

6. Working condition: which material to lift? temprature?

Packaging Details

Port Container Gantry Cranes packaging standard:
1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying.
2. Main beams, end beams and trolly/winch are packed by plastic woven cloth. It can reduce abrasion during the transportation.
3. If the size are suitable for container ship, usually by container.
4. Big size, usually by bulk ship or by container after truncation.
5. Transport ways are based on reducing cost & keep safety.

Gantry Crane After-sale Service

1.1 year standard warranty (could be prolonged by discussion).

2. 24 hours response.
3. Free mail and telephone service guidance.
4. Necessary door to door service to solve the problem.
5. In warranty period, if our machine has problem and the problem can’t be solved by door to door service for 3 times, we will send you a new machine replace the former one freely.

6. one or two sets free quick-wear parts.

FAQ

1. Is your products customized?

Yes, because the working condition are different, all our products are customized depending on detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick quote!

2. What’s the information should I provide when inquiry?

Thanks for your question. The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.

3. How many operating methods for my selection?

Thanks for your question. The standard operating methods we provide is pendent controller with push buttons. Meanwhile, we can also provide the remote control with push buttons and the cabin (space capsule seat) control with joystick. You can choose any of them, just tell us!