Free Standing Jib Crane with Motorized Rotary and Electric Hoist

Product Specification

Free Standing Jib Crane with Motorized Rotary and Electric Hoist

OVERVIEW

Jib crane is a kind of crane that fixed on the ground. Its operation area is circular due to its has a rotatable cantilever. Combined with hoist unit like electric hoist, chain hoist, chain block, it can realize transportation of cargos in its coverage.

APPLICATION

It’s widely used in production lines, assembly lines and work station of machine tools, mines and workshops, warehouses, docks, etc.

FEATURE & ADVANTAGE

Small space occupied, easy installation, convenient for workers to use, flexible rotation , high efficiency.

INSTALLATION

1 . Column installation:

Lift the column vertically. Set all bolts in foundation right through bolt holes on bottom flange of the column. Then adjust column verticality and tighten all nuts.

2. Arm/jib/cantileverinstallation

Before installation, lifting hoist should be installed on the arm/jib/cantilever and fixed.

Aligning shaft of column to turntable hole at end of jib/arm, then assemble arm and column together slowly. After parts are in place, tighten the fixing bolts. Then install the power supply ring. Test beam rotation with a rope and rotating should be flexible without jamming and abnormal phenomenon.

3.Drive unitinstallation:

Make cycloid reducer match with ring gear on column. Make sure that drive gear meshes with large ring gear, then fixed the reducer to flange by bolts.

Product Application:

The Wall Traveling Jib Crane is the special equipment for the Machinery manufacturing, and assembly workshop. It utilizes the rails installed on the multilayer wall assembly workshop, to achieving moving on the wall. The lifting capacity for this kind of crane is range from 0.25t- 20t, the max arm lenght it can achieve is 10m. The sizes of traveling rail can be customized according to the clients’ requirements.
Application: It especially suits the short distance and crowded working environment. And it can be widely used in all kinds of
places in various industry.
Features: This is kind of jib crane can make full use of the space structure of workshop, which save the production site, and can operate flexibly.
Classification: According to the main beam structure, the wall traveling jib crane consists of two kinds, single main beam and double main beam. The single beam type jib crane is equipped with the electric hoist, and the double beam type trolley structure has pushing trolley and standard trolley two kinds.

Technical parameters

FAQ

1. What’s the information should I provide when inquiry?

More details or drawings, more better.

A: Lift capacity

B: span

C: lift height

D: power source

Or other specials you give us will be more appreciated.

2. How many operating methods for my selection?

Standard operating methods:

A: pendent controller with push buttons.

B: remote control with push buttons

C: cabin(space capsule seat) control with joystick.

Choose any type as you like.

3. Can this type work in hazardous environment?

Sure! Can customize for you, acid proof or explosion proof, no problem for that.

4. How long is your warranty?

Our warranty is 15 months after received the goods.

5. Can you provide the serious lifting tools?

Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!

6. Usage period

About 30 years under common use.

7. How can we install the crane?

Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.

8. Safety device

Overload limiter, Limit Switch (lifting and traveling), Interlock protection device, Buffer, Overhaul cage, Rail clear plate, Protective cover, Bus bar preventer plate, Anti-collision device, Main isolating switch, Emergency stop system, Motor overload protection, and so on.