Product Specification

 IP65 19” standard Rack Galvanized Steel Equipment Rack Cabinet With Cooling System

1.Technical Parameters

External Dimension H×W×D 1000×650×650mm

One compartment

Equipment Installation Method:19” standard rack

With one front door:

With anti-theft three point lock for outdoor cabinet (support padlock)

Material :Single wall 1.2mm Galvanized Steel with heat insulation

Ingress Protection:IP65

Temperature Control:220VAC 50HZ 600W Air Conditioner

LED lamp:220VAC LED lamp

Working Temperature: -40°C ~ +55°C

Storage Temperature: -50°C ~ + 70°C

Transport Temperature: -50°C ~ +70°C

Humidity Relative Humidity 5% ~99%

Air Pressure :62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)

Solar Radiation Intensity:1124 × (1±5%)W/m2

Accessories List

2.Cabinet Features

Compact and light single-walled design
Highest protection against corrosion
Features an integrated roof
Thickness of plate: 1.2mm
with heat insulation ,Polyester powder coat with UV protection
PUR non-porous gasket—suitable for extreme temperatures
Fully welded design, supplied complete, no assembly required
Surface finish: Degreasing, pickling, phosphoric wash, cleaning, and powder coated

3. Cabinet Instructions

This cabinet is 1000mm High and 650mm Wide and 650mm Deep. This cabinet represent a suitable solution for projects with high requirements on stable in-rack climate. They are specifically designed for mounting onto a column.
 

4.Optional Accessories 

 
● Cooling solution: We adopt Air conditioner to control temperature ensuring the best working condition inside the cabinet.
● Power distribution unit: can meet the requirements of power system normal operation and equipments maintenance
●Sensors: can monitor internal temperature,humidity,fire/smoke,door opened state.
● Light: one piece LED tube light is for lighting insde and fixed on the top cover.
● Strong rack inside to be equipped with telecom equipments, power source, temperature control device and other attachments.
● Digital display the temperature-setting, temperature alarm, temperature parameters inside and outside, and all kinds of other alarm information, etc.

5.Cabinet Features

-Ingress protection is IP55, we can provide IP65 cabinet based on client’s actual.

-Made of heavy gauge galvanized material.

-Front door use standard three-point anti-theft lock. The door lock forms an upper, middle and lower three-point locking structure. For the cabinet with large area, the locking effect is safe and reliable.

-Standard 19 inch mounting posts.

-Doors secured with steel dead locking system lock (support PADLOCK)

-It is installed in the ground root or above ground column base system by "direct burying"

-Cable entry is via the base as standard with side or roof entry available upon request.

6. Cabinet Introduction

• Cabinet Structure

The cabinet includes 19” equipment installation rack. The cabinet includes one air conditioners, installed on front door.

• Cabinet Door and Lock

The cabinet includes one front door and one back door. The cabinet door uses embedded structure. The door opening angle is larger than 110°and the door limit device can limit the opening angle. The lock is theftproof three point lock, supporting padlock. Each cabinet door include open door sensor, working together with the environment monitoring unit.
 

7. Technical Specs

• Material: good quality galvanized steel
• Surface treatment: degreasing, derusting, rustproof phosphating (or galvanizing), powder coated.
• Cabinet load bearing: ≥600kg
• Ingress protection: IP65
• Flame retardance: comply with GB5169.7 test A
• Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is not lower than 2×104M/500V(DC).
• Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V(DC)/1min.
• Mechanical strength: each surface can bear upright pressure >980N; after the door is open, its outer end can bear upright pressure >200N.

8.Dimension Diagram

9.Components Installation

LED lamp, LED lamp sensor, smoke sensor, door sensor and temperature & humidity sensor are installed at the top of the cabinet.

 

 
Water sensor is installed at the bottom of the cabinet.

 

 
 
 
PDU and environment monitoring unit are installed on 19” rack.

 
 
The cabinet includes totally two air conditioners, one air conditioner installed on front door and the other installed on back door.
 
 

 
Cable Inlet
 
Feeder cable and other external cables all use bottom wiring method.