Dongguan Ruichen Sealing Co., Ltd.
| Payment Terms | L/C,Paypal, T/T |
| Supply Ability | 30000000 PCS / Month |
| Delivery Time | 7-45 work days |
| Packaging Details | PE inside , Carton Outside |
| Material | FKM |
| Hardness | 30 ~ 90 shore |
| Color | Black Brown Green RED |
| Heat Range | -40 ~180 ℃ |
| Acild Resistant | Acceptable |
| Size | Any size acceptable |
| Lead time | 5-8 work days |
| Standard | AS568 BS1516 |
| Brand Name | ORK |
| Model Number | Customized |
| Certification | FDA,ROHS,ISO9001,TS16949 |
| Place of Origin | Guangdong,China |
View Detail Information
Explore similar products
Industrial Fluorine Rubber O Ring Seals , Fluorocarbon Oring TS16949 ROHS
FKM 70 Fuel Resistant O Rings High Fluorine Grades For Low Compression Set
Fluorine Rubber Seals O Ring Heat Resistant , Green O Rings For Aircraft Engine
Metric Brown Green Black O-Ring FKM With Acid Resistant For Aircraft Engines
Product Specification
| Payment Terms | L/C,Paypal, T/T | Supply Ability | 30000000 PCS / Month |
| Delivery Time | 7-45 work days | Packaging Details | PE inside , Carton Outside |
| Material | FKM | Hardness | 30 ~ 90 shore |
| Color | Black Brown Green RED | Heat Range | -40 ~180 ℃ |
| Acild Resistant | Acceptable | Size | Any size acceptable |
| Lead time | 5-8 work days | Standard | AS568 BS1516 |
| Brand Name | ORK | Model Number | Customized |
| Certification | FDA,ROHS,ISO9001,TS16949 | Place of Origin | Guangdong,China |
| High Light | FKM oring ，fluorine rubber o ring | ||
Low / High Temp Resistant FKM O Rings Customized For Automobile Systems
FKM® or fluorocarbon elastomers were first introduced in the mid 1950's. Since then they have become of major importance in the seal industry. Due to its good chemical resistance, high temperature range and its low compression set, fluorocarbon rubber is the most significant single elastomer development in recent history. The working temperature range ifor FKM® is considered to be -15 to +400 degrees F (-29 to +204 degrees C), but it will take temperatures up to 600 degrees F (316 degrees C) for short periods of time. Du Pont's Kalrez® is normally recommended up to 500 degrees F (260 degrees C). On the low end, FKM® compounds have been known to seal at -65 degrees F (-54 degrees C) in some special static applications, however the normal low temperature limit is -15 degrees F (-26 degrees C). Fluorocarbon 0-rings should be considered for seal use in aircraft, automobile, scientific instruments and other mechanical devices requiring maximum resistance to elevated temperature and to many functional fluids. They are widely used in diffusion pumps on vacuum systems and on vacuum flanges on mass spectrometers and electron microscopes. FKM® is recommended for most applications and Kalrez® is only used where the additional temperature range can be justified by the increased cost.
| FKM® and Kalrez® are recommended for:
FKM is not recommended for:
|
| ORIENTAL STAR TEST REPORT | |||
| V7501 COMPOUND | |||
| ASTM D2000 M2HK 710 A1-10 B37 B38 EO78 EF31 F13 Z=Hardness 75±5 | |||
| Press Cure | |||
| Sheet : 5min 175℃ | |||
| Button : 10 min 175℃ | |||
| ORIGINAL PROPERTIES | SPECIFICATION | TEST RESULT | |
| HARDNESS SHORE A | 75°±5 | 73 | |
| TENSILE STRENGTH, MPA, MIN | 10 | 10.9 | |
| ULTIMATE ELONGATION, ％, MIN | 150 | 213 | |
| SPECIFIC GRAVITY (g/cm3) | 1.85+/-0.08 | 1.87 | |
| HEAT RESISTANCE 70 H . AT 250℃(A1-10) | |||
| CHANGE IN HARDNESS, POINTS | +10 | +5 | |
| CHANGE IN TENSILES STRENGTH, % | -25 | +26 | |
| CHANGE IN ULTIMATE ELONGATION,MAX % | -25 | -18 | |
| COMPRESSION SET, MAX, 22H AT 175℃ (B37 ) | 50 | 21.5 | |
| COMPRESSION SET, MAX, 22H AT 200℃ (B38 ) | 50 | 28.3 | |
| FLUID RESISTANCE FUEL.101. 70H AT 200℃ (EO78) | |||
| CHANGE IN HARDNESS, POINTS | -15~+5 | -13 | |
| CHANGE IN TENSILES STRENGTH, MAX % | -40 | -20.7 | |
| CHANGE IN ULTIMATE ELONGATION,MAX % | -20 | -8.3 | |
| CHANGE IN VOLUME % | 0~+15 | +10.5 | |
| FLUID RESISTANCE FUEL C, 70H AT 23℃(EF31) | |||
| CHANGE IN HARDNESS, POINTS | ±5 | -4 | |
| CHANGE IN TENSILES STRENGTH, MAX % | -25 | -20.2 | |
| CHANGE IN ULTIMATE ELONGATION,MAX % | -20 | -18.6 | |
| CHANGE IN VOLUME % | 0~+10 | +5 | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company,Seller
Year Established:
2006
Total Annual:
15000000-30000000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
DONGGUAN RUICHEN SEALING CO., LTD SHANGRAO RUICHEN SEALING CO.,LTD Ruichen Sealing Co., Ltd was built in 2006, The company has two branches in Dongguan and Shangrao.They are Dongguan Ruichen Sealing Co., Ltd. and... DONGGUAN RUICHEN SEALING CO., LTD SHANGRAO RUICHEN SEALING CO.,LTD Ruichen Sealing Co., Ltd was built in 2006, The company has two branches in Dongguan and Shangrao.They are Dongguan Ruichen Sealing Co., Ltd. and...
Get in touch with us
Leave a Message, we will call you back quickly!