3 Tanks Cold Drink Dispenser Making Machine For Milk Tea Supermarket

Product Specification

Konmax Cold Drink Dispenser Description:
1) The Juice Beverage Dispensing Machine can dispense fruit punch, lemonade, iced tea, and fruit juice containing particulates.
2)It is suitable for convenience store, hotels, restaurant chains, commercial streets, schools and other places with greater demands. In the heat of summer, can be make ice milk, ice cold beer, sherbet, plum juice, soybean milk, soda, coffee and other soft drinks.
3) Three 4.75 gallon bowls, with easy to read measuring marks, are separate to allow bowl cleaning and flavor changes without "total system shut-down". Classic bubbler style dispenser with magnetic drive agitators, can be set for efficient agitation, stainless steel dispensing valves.
4)Equipped with magnetizing jet pump, may magnetize beverages, helpful for your health, it sprays beverage like a fountain during operation, and cooling effect lasts for a long time.
5)Unique stainless steel evaporator and high efficiency pump cools faster and more efficiently for faster start-ups.

Konmax Cold Drink Dispenser Application:
Hotel use ,restaurant,store , supermarket,bar

 Konmax Cold Drink Dispenser Detailed Photo:
 

food class PC transparent material , safe and easy-cleaning

Convenient water tray design to make it easy to operate .

Konmax Cold Drink Dispenser Installing Instruction:
1: To install it ,pls choose the site which is flat,fixable and can avoid the direct sunshine in sunmmer.
2:Around the juicer, should have 150mm up room to make the air circulating and make sure the machine can run effectively.
3:Before installing, pls check the supply whether confirm the requirements or not. The power supply cable is  not too thin or too long. The cross section of cable should be 1.5-2.5mm, Voltage is mounted on the fixed  position with fuse which will keep the users safety,it must have reriable grounding. The socket should be  mounted on the fixed position with fuse which keep the machine running safety.
4;To make the fix position for juicer,should make its frond lower and back higher(to ajust the foot of bottom  can do it), then the water in the salver can flow into the box through the hose.

Konmax Cold Drink Dispenser How to use the cold beverage machine
1.To fall prepared beverage into the crock , the height of it is should not exceed the standard height (9L-12L-18L-20L-50L), otherwise the beverage will flow into the churn-dasher from the dasher tube,which will make the dasher burn .
2.The temperature of the beverage should not too high (not exceed 35), otherwise it will make bad effection for the refrigeration .
3.Plug in the supply power to the 3 hole socket , the grounding hold should connect with the protecable wire or fixture to ensure the safety .
4.To turn the switch on the position of refrigeration , press down the refrigeration switch , the compressor fan starts running and refrigeration system starts working .
Then start the dasher to mix or start the spewing swtich to spew.
5.When the beverage becomes to the suitable temperature , please make the cup against the push board lightly .the beverage will flow into the outlet mouth .
6.when the temperture reduces to the certain degree , the refrigeration will stop running because of the influence from the temperature
cotroller .And when it increases, it will start automatically again .
7.It should re-start after 5 minuters if it turn off suddenly or stop temporarily .otherwise it will damage the compressor .