Chengdu I-ReHealth Medical Devices Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 1000box/mouth |
| Delivery Time | 3-14 work days |
| Packaging Details | box 70*54*165mm |
| Product Name | Pit And Fissure Sealant |
| Shelf Life | 3 years |
| Specifications | 3g |
| Place | China |
| Color | Blue |
| color | Pink |
| Curing Depth | >1.5mm |
| Brand Name | I-ReHealth |
| Model Number | Pit And Fissure Sealant |
| Certification | ISO |
| Place of Origin | Sichuan,China |
View Detail Information
Explore similar products
BIS-GMA Preventive Pit And Fissure Sealant Prevent Tooth Caries
Pink Color Dental Light Curing Pit And Fissure Sealant For Pediatric Bad Tooth
3ml Pit And Fissure Sealant For Sensitive Tooth With White Color
Strong Sealing White Color Pit And Fissure Sealant With 15Mpa
Product Specification
| Payment Terms | T/T | Supply Ability | 1000box/mouth |
| Delivery Time | 3-14 work days | Packaging Details | box 70*54*165mm |
| Product Name | Pit And Fissure Sealant | Shelf Life | 3 years |
| Specifications | 3g | Place | China |
| Color | Blue | color | Pink |
| Curing Depth | >1.5mm | Brand Name | I-ReHealth |
| Model Number | Pit And Fissure Sealant | Certification | ISO |
| Place of Origin | Sichuan,China | ||
| High Light | Blue Pit And Fissure Sealant ，3g Pit And Fissure Sealant ，Children Oral Health Fissure Sealant | ||
3g BLUE Color Pit And Fissure Sealant For Children Oral Health
[Structure and composition]
This product is composed of bisphenol A glyceride, triethylene glycol dimethacrylate, hydrophobic nano-silica, tetrabutylammonium tetrafluoroborate, camphorquinone photoinitiation system and colorant; inner packaging Syringes are black polypropylene (plug included). Among them, the purple colorant is titanium dioxide, erythrosin and methylene blue; the pink colorant is titanium dioxide and erythrosin; the blue colorant is titanium dioxide and methylene blue; the white colorant is titanium dioxide.
[Product performance]
It is a viscous liquid before curing, with uniform color and no foreign matter, and it is a milky white solid after curing; the curing time (the time required to be exposed to external energy for complete curing) should not be greater than 40 s; the curing depth should not be less than 1.5 mm.
[Scope of application]
The product is used to prevent dental caries, seal the pits and fissures of teeth, and block the entry of bacteria.
Product Information:
| Name | Pit And Fissure Sealant |
| Package | 3g |
| Color | Blue |
| Warranty | 3 Years |
| Approved | ISO |
【Instructions】
1. Clean the tooth surface: install a small brush on the low-speed mobile phone, thoroughly clean the pits and grooves on the tooth surface that are to be sealed, and then rinse fully with a water gun. After cleaning the tooth surface, use cotton gauze balls to prevent moisture, dry the tooth surface and keep it dry.
2. Acid etching, rinsing and drying: It is recommended to use phosphoric acid gel with a phosphoric acid content of not less than 35% for acid etching. The etching time of permanent teeth is generally 20-30 seconds, and that of deciduous teeth is 60 seconds. Be careful not to wipe the etched tooth surface during the etching process, because this will damage the etched enamel surface and reduce the bonding force.
3. Apply sealant: Unscrew the sealing cap of the pit and fissure sealant, install a dental flushing needle or a dental delivery head, gently push the push rod of the conveyor, and directly apply the pit and fissure sealant to the pit and fissure. When applying pit and fissure sealant, attention should be paid to the discharge of air bubbles, and the coverage of the sealant should be smaller than that of the acid-etched surface, and it should be as thick as possible without affecting the occlusion. Sometimes it may be high, but it can be worn off after 2-3 days. If the coating is too thin, it will lack sufficient compressive strength and be easily crushed.
4. Curing: After coating, irradiate the pit and fissure sealant with a light curing machine (lamp) for 20-40 s. The wavelength of the light curing machine (lamp) should cover 420-480 nm, and the irradiance (light intensity) should not Less than 1000 mw/cm2, those with large area should be irradiated in stages. This product does not flow after curing, and forms a thin, hard milky white film on the tooth surface, which is easy to observe.
5. Inspection: After the sealant is cured, conduct a comprehensive inspection with a probe. Check for degree of cure, adhesion, presence of air bubbles, look for missing or unsealed fissures and reseal. Observe whether there is too much sealing material and whether it needs to be removed. If any problem is found, it should be dealt with in time; check the occlusal relationship, and adjust the grinding if the sealing agent is too thick.
Company Profiles:
Chengdu I-ReHealth Medical Devices Co., Ltd is a high-tech R&D and manufacturing company focusing on the oral health field (medical materials and medical devices). Founded in 2016, it is located in the beautiful "Tianfu Kingdom"-Chengdu.
Based on the dental industry, I-ReHealth develops a strategic layout and is committed to providing customers with high-quality oral medical solutions. The company has formed a long-term and in-depth cooperation relationship with the West China Hospital of Stomatology.
FAQ:
1.How can I get the price?
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2016
Total Annual:
50Million-80Million
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Introduction For over 8 years , Chengdu, Sichuan Province, China based I-ReHealth Medical Devices Co., Ltd always want to be one of the leading international manufacturers of dental materials. With our intensive research and development efforts in the Fluoride and other dental materials, I-ReHeal... Introduction For over 8 years , Chengdu, Sichuan Province, China based I-ReHealth Medical Devices Co., Ltd always want to be one of the leading international manufacturers of dental materials. With our intensive research and development efforts in the Fluoride and other dental materials, I-ReHeal...
Get in touch with us
Leave a Message, we will call you back quickly!