Shenzhen Newbridge Communication Equipment Co.,Ltd
| Packaging Details | packing can be done by customer's requested, usually used in carton |
| Delivery Time | According to the quantiy and stocking , 3-4 working days after payment |
| Payment Terms | T/T , Western Union |
| Supply Ability | According to the different products , the monthly output is different |
| fiber | single mode |
| Device Type | optical SFP Module |
| Data rate | 10G |
| Operating temperature | 0°C to 70°C |
| distance | 20km |
| Fiber Connector | SC,FC,ST |
| Brand Name | NEWBRIDGE |
| Certification | FCC,CE |
| Place of Origin | SHENZHEN,CHINA |
| Model Number | ND-10XFP-LR |
View Detail Information
Explore similar products
3.3 V Operating Voltage Copper SFP Transceiver Module Fast Ethernet Compatible
1.25G SFP Transceiver Module , Optical Transceiver Module Dual Fiber 1310nm for
Dual Fiber SFP Module Transceiver Mini 1.25G 500m To 120km Simplex LC Connect
Hot Pluggable 155M SFP Bi-Di Single Fiber Transceiver Module 20km To 120km
Product Specification
| Packaging Details | packing can be done by customer's requested, usually used in carton | Delivery Time | According to the quantiy and stocking , 3-4 working days after payment |
| Payment Terms | T/T , Western Union | Supply Ability | According to the different products , the monthly output is different |
| fiber | single mode | Device Type | optical SFP Module |
| Data rate | 10G | Operating temperature | 0°C to 70°C |
| distance | 20km | Fiber Connector | SC,FC,ST |
| Brand Name | NEWBRIDGE | Certification | FCC,CE |
| Place of Origin | SHENZHEN,CHINA | Model Number | ND-10XFP-LR |
| High Light | optical transceiver module ，fiber sfp module | ||
Product Features
●Supports 9.95 to 10.5Gb/s bit rates
●Duplex LC connector
●Hot pluggable SFP+ footprint
●850nm VCSEL transmitter, PIN photo-detector
●Up to 300m on 50/125um MMF(2000MHZ.KM)
●Low power consumption, < 1W
●Digital Diagnostic Monitor Interface
●Optical interface compliant to IEEE 802.3ae
●Electrical interface compliant to SFF-8431
●Operating case temperature:
Commerical:-20 to 75 °C
Industrial:-40 to 80 °C
Applications
●10G Base-SR/SW at 10.3125G
●10G Fiber Channel
●Other optical links
Product Descriptions
The Transceiver Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet over Multi Mode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-SR/SW. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication and datacom.
Functional Diagram
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Data Rate
| 9.953 | 10.3125 | 10.518 | Gb/s | ||
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Supply Current | Icc5 | 180 | 280 | mA | ||
| Operating Case Temp. | Tc | 0 | 70 | °C | ||
| TI | -40 | 80 |
Electrical Characteristics (TOP(C) = -20 to 75 ℃, TOP(I) =-40 to 80 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Differential data input swing | VINPP | 180 | 700 | mVpp | 1 | |
| Transmit Disable Voltage | VD | 2.0 | Vcc+0.3 | V | ||
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
| Input differential impedance | Rin | 100 | Ω | |||
| Receiver | ||||||
| Differential data output swing | Vout,pp | 300 | 850 | mVpp | 2 | |
| Output rise time and fall time | Tr, Tf | 28 | 2.0 | Vcc+0.3 | Ps | 3 |
| LOS Fault | VLOS_F | 2 | 0 | Vcc_HOST | V | 4 |
| LOS Normal | VLOS_N | Vee | Vee+0.8 | V | 4 | |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.
Optical Characteristics (TOP(C) = -20 to 75 ℃, TOP(I) =-40 to 80 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 840 | 850 | 860 | nm | |
| Ave. output power (Enabled) | PAVE | -5 | -1 | dBm | 1 | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 4 | 5.5 | dB | ||
| RMS spectral width | Δλ | 0.45 | nm | |||
| Dispersion penalty | TDP | 3.9 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | 840 | 860 | nm | |||
| Receiver Sensitivity(ER=4) | PSEN1 | -10.9 | dBm | 2 | ||
| Receiver Sensitivity(ER=5.5) | PSEN2 | -11.1 | dBm | 3 | ||
| Average Receive Power | PAVE | +0.5 | dBm | |||
| Receiver Reflectance | Rrx | -12 | dB | |||
| LOS Assert | Pa | -30 | -23 | dBm | ||
| LOS De-assert | Pd | -14 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Valid between 840 and 860 nm. Measured with worst ER=4; BER<10-12; 231 – 1 PRBS.
3. Valid between 840 and 860 nm. Per IEEE 802.3ae
| Pin | Symbol | Name/Description |
| 1 | VEET [1] | Transmitter Ground
|
| 2 | Tx_FAULT [2] | Transmitter Fault
|
| 3 | Tx_DIS [3] | Transmitter Disable. Laser output disabled on high or open
|
| 4 | SDA [2] | 2-wire Serial Interface Data Line |
| 5 | SCL [2] | 2-wire Serial Interface Clock Line
|
| 6 | MOD_ABS [4] | Module Absent. Grounded within the module
|
| 7 | RS0 [5] | Rate Select 0 |
| 8 | RX_LOS [2] | Loss of Signal indication. Logic 0 indicates normal operation |
| 9 | RS1 [5] | Rate Select 1
|
| 10 | VEER [1] | Receiver Ground
|
| 11 | VEER [1] | Receiver Ground
|
| 12 | RD- | Receiver Inverted DATA out. AC Coupled
|
| 13 | RD+ | Receiver DATA out. AC Coupled
|
| 14 | VEER [1] | Receiver Ground
|
| 15 | VCCR | Receiver Power Supply
|
| 16 | VCCT | Transmitter Power Supply
|
| 17 | VEET [1] | Transmitter Ground
|
| 18 | TD+ | Transmitter DATA in. AC Coupled
|
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled
|
| 20 | VEET [1] | Transmitter Ground
|
Notes:
1.Module circuit ground is isolated from module chassis ground within the module.
2.should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.
3.Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
4.Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+ module is physically absent from a host slot.
5. RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module.
Digital Diagnostic Specifications
The transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
| Parameter | Symbol | Units | Min. | Max. | Accuracy | Note |
| Transceiver temperature | DTemp-E | ºC | -45 | +90 | ±5ºC | 1,2 |
| Transceiver supply voltage | DVoltage | V | 2.8 | 4.0 | ±3% | |
| Transmitter bias current | DBias | mA | 0 | 127 | ±10% | 3 |
| Transmitter output power | DTx-Power | dBm | -2 | +3 | ±2dB | |
| Receiver average input power | DRx-Power | dBm | -20 | +1 | ±2dB |
Notes:
1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the las
Package Dimensions
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2004
Ecer Certification：
Active Member
Who We Are? Shenzhen Newbridge Communication Equipment Co. Ltd (short title: Newbridge) is one High-technology manufacturer and found in 2004, located in Shenzhen .Our product is controlled according to the standard of ISO9001 and FCC and CE etc. we have been absorbed in developing, designing, ma... Who We Are? Shenzhen Newbridge Communication Equipment Co. Ltd (short title: Newbridge) is one High-technology manufacturer and found in 2004, located in Shenzhen .Our product is controlled according to the standard of ISO9001 and FCC and CE etc. we have been absorbed in developing, designing, ma...
Get in touch with us
Leave a Message, we will call you back quickly!