Magnetic Shape Memory Alloy MSMA Magnetostrcitive Material Ni50-Mn28-Ga22

Product Specification

Magnetic Shape Memory Alloy MSMA Magnetostrcitive Material

Magnetic Shape Memory Alloy Ni50-Mn28-Ga22 MSMA Magnetostrcitive Material

The Magnetic Shape Memory (MSM) in a Ni-Mn-Ga alloy was discovered in 1996 at MIT by Dr. Kari Ullakko and co-workers. The first MSMA alloy showed a strain of 0.2%. Since then, huge improvements have been achieved in the production process of MSM alloys as well as in the post-production treatments and training

The Magnetic Shape Memory Alloy(MSMA) is a new type of functional material that the heat-induced Martenitic phase transition occurs only under the temperature field, and also is stress-induced and magnetic-induced ones. The main component of the Magnetic Shape Memory Alloy (MSMA) is Ni-Mn-Ga, and the linear deformation rate reaches 10% at room temperature.

MSMA has great strain and high impetus and fast response speed and high efficiency. It is expected to become the preferred driving material in intelligent material systems.

Characteristics of the Magnetic Shape Memory Alloy for commercial use

• Typical strain up to 6%
• Blocking stress up to 3.5 MPa
• Magnetic Õeld for maximum strain of about 500 kA/m
• Full strain up to about 2 MPa load
• Work output per unit volume of about 150 kJ/m³
• Energetic eÞciency up to 90%
• Reaction times of about 1 ms (in MSM actuators)
• Hysteresis between stress or magnetic Õeld and strain (material damping)
• Internal friction
• Magnetic and thermal activation are both possible
• Operating temperatures: -40 °C to 60 °C
• Change in magnetic permeability and electric resistivity during deformation

As the professional magnetostrictive materials suppliers in China, we can provide high performance NiMnGa single crystal materials with specifications of multiple sizes to domestic and foreign customers, the minimum size is 0.5mm,the maximum size is 30mm.

General dimensions

• 1x2.5x20mm
• 2x3x15mm
• 3x5x20mm

The minimum order quantity is 10pces.

Electrical Properties

• Electrical resistivity ( µOhm/cm ) 70
• Temperature coefficient ( K-1 ) 0.003

Magnetic Properties
Coercivity (Hc) ( A m-1 ) 4000
Curie temperature ( C ) 95 - 105
Initial permeability 2
Maximum permeability 90
Remanence from saturation (Brem) ( T ) 0.02
Saturation flux density ( T ) 0.6

Mechanical Properties

• Hardness - Vickers ( kgf mm-2 ) 130
• Modulus of elasticity ( GPa ) 8 - 20
   

Physical Properties

• Density ( g cm-3 ) 8
• Melting point ( C ) 1130

Thermal Properties

• Crystallization temperature ( C ) 1090
• Maximum use temperature in air ( C ) 45
• Temperature - Austenitic ( C ) 50
• Temperature - Martensitic ( C ) 45

About XUNSHI

Suzhou Xunshi New Material Co. Ltd- referred as XUNSHI hereafter, is a professional manufacturer of high-performance alloy products. XUNSHI is engaged in supplying high quality and cost-effective Superalloy, Anti-Corrosion Alloy, Precision Alloy, Special Stainless Steel and Magnetostrictive Material to customers worldwide.

Why XUNSHI

· Highly experienced in alloy industry

· Top experts of industry in China

· Advanced technology and process from top famous institutes in China

· Advanced devices through whole production and inspection process

· Strict quality control system

· Company motto: best service, most value

· Smart sales policy

Service Items of XUNSHI

· Non-standard product research and pre-production

· Fabrication of products

· Cutting, splitting for sheets and plates in stock

· Heat treatment (Solution treatment, aging harden treatment, anneal, spring temper, quench etc.)

· Surface finish (peeling, gridding, polishing)

· Logistics service

· Customized packing service (also for exporting)

· Import and export (XUNSHI is certificated)

· Document translation

· Hard-to-find material sourcing

Customers of XUNSHI

Customers of XUNSHI are all over China (Taiwan and Hong Kong included). And we are exporting to USA, Canada, Italy, UK, Poland, Greece, Russia, Turkey, Iran, Israel, South Africa, South Korea, North Korea, India, Argentina, and Brazil and so on. Customers from 30+ countries trust us.

Where is XUNSHI

A- XUNSHI is in Huaqiao, Kunshan, 215332 China, which is very closed to Shanghai.

B- Xunshi is around 80KM from Shanghai Pudong International Airport (PVG).

C- 20KM from Shanghai Hongqiao Airport

D- 20KM from Shanghai Hongqiao Railway Station

E- You can contact XUNSHI sales for a pickup service.