Hunan Dinghan New Material Technology Co., LTD
| Payment Terms | T/T |
| Supply Ability | Negotiable |
| Delivery Time | (Sample Order) 7 days |
| Packaging Details | According to Customers' Requests |
| Product Name | Nickel Alloy Wires |
| Grade | Monel K500 |
| UNS | N05500 |
| Density | 8.44g/cm³; 0.305 lb/in³ |
| Melting Point | 1350°C; 2460°F |
| Expansion Coefficient | 13.7 μm/m °C (20 – 100°C); 7.6 x 10-6 in/in °F (70 – 212°F) |
| Rigidity Coefficient | 66 kN/mm²; 9573 ksi |
| Elasticity Coefficient | 179 kN/mm² ; 25962 ksi |
| Brand Name | DINGSCO |
| Model Number | According to customers requirements |
| Certification | ISO 9001:2015,PED 2014/68/EU,API 6A,API-20B,TSG,NORSOK |
| Place of Origin | China |
View Detail Information
Explore similar products
Hastelloy Welding Wire Roll Corrosion Resistant For Electrical / Electronics
Waste Treatment Nickel Alloy Wires Inconel 625 Air Pollution Control UNS NO6625
Customized Nickel Copper Alloy Wire Good Ductility Thermal Conductivity Monel K
ISO9001 Nickel Alloy Wires Inconel 600 UNS N06600 Valves Pumps Electronic
Product Specification
| Payment Terms | T/T | Supply Ability | Negotiable |
| Delivery Time | (Sample Order) 7 days | Packaging Details | According to Customers' Requests |
| Product Name | Nickel Alloy Wires | Grade | Monel K500 |
| UNS | N05500 | Density | 8.44g/cm³; 0.305 lb/in³ |
| Melting Point | 1350°C; 2460°F | Expansion Coefficient | 13.7 μm/m °C (20 – 100°C); 7.6 x 10-6 in/in °F (70 – 212°F) |
| Rigidity Coefficient | 66 kN/mm²; 9573 ksi | Elasticity Coefficient | 179 kN/mm² ; 25962 ksi |
| Brand Name | DINGSCO | Model Number | According to customers requirements |
| Certification | ISO 9001:2015,PED 2014/68/EU,API 6A,API-20B,TSG,NORSOK | Place of Origin | China |
| High Light | High Strength Nickel Alloy Wires ，Nickel Alloy Wires Monel K500 ，Monel K500 Wire | ||
Nickle Alloy Wires Monel K500 UNS N05500 Vacuum Devices Chemical Production
Welding wires are slim metallic wires that are usually coiled up in spools. These spools are loaded on a wire feeder and the welding wire is continuously fed through a welding gun into the molten weld pool. As a result, arc welding processes that use a welding wire tend to offer higher deposition rates and faster travel speeds, as compared to TIG and Stick welding where the welder must manually feed the filler metal into the weld puddle.
Monel K500, is a age-hardenablenickel-copper alloy that combines the corrosion resistanceproperties of Monel 400 with high strength corrosion fatigue and erosion resistance properties. It is precipitation hardenable through theadditions of aluminum and titanium. The chemica composition of It retains the excellent corrosionresistant characteristics of alloy 400.When compared with Monel 400, it has enhanced strength and hardnessafter precipitation hardening. It has approximately three times the yield strength and doublethe tensile strength of alloy 400.It can befurther strengthened oy cold working before the orecipitation hardening. It should be annealed when welded and theweldment then stress relieved before aging.
Applications:
Typical applications for Monel K500 that take advantage of high strength and corrosion resistance are pump shafts,impellers, propeller shafts, valve components for ships andoffshore drilling towers, bolting, oil well drill collars, andinstrumentation components for oil and gas production.ltis particularly well suited for centrifugal pumps in themarine industry because of its high strength and low corrosion rates in high-velocity sea water.
High Performance Alloys stocks Alloy K500 in a range otcold drawn, annealed and aged, and hot finished andaged. Material can be supplied in random lengths, cut to order or machined to your specifications. Machining includes drilling, turning, tapping, threading, CNC shapes,flanges, and more. Pump shafts, impellers, propeller shafts. Pumps and valves used in the manufacture of perchlorethylene,chlorinated plastics. Valve components for ships and offshore drilling towers. Instrumentation components for oil and gas production. Oil well drill collars. Particularly well suited for centrifugal pumps.Equipment for processes utilising halide or acid catalysts.
Machining:
Nickel based alloys can be difficult tomachinine.However, it should be emphasized that thesealloys can be machined using conventional productionmethods at satisfactory rates. These alloys harden rapidlygenerate high heat during cutting, weld to the cuttingtool surface and offer high resistance to metal removabecause of their high shear strengths. The following arekey points which should be considered during machining operations: capacity/tools/positive cut/lubrication.
Chemical Composition:
| Element | Ni | Cu | C | Mn | Fe | S | Si | Al | Ti |
| Minimum(%) | 63 | 27 | - | - | - | - | - | 2.3 | 0.35 |
| Max(%) | - | 33 | 0.25 | 1.5 | 2.0 | 0.01 | 0.5 | 3.15 | 0.85 |
Magnetic Characteristics of MONEL alloy K-500:
| Condition | Tensile Strength, ksi | Permeabilitya | Curie Temperature, °F for Permeability of | |||
| 1.01 | 1.02 | 1.05 | 1.1 | |||
| Annealed, Quenched | 92.5 | 1.0011 | -210 | -210 | - | - |
| Annealed, Age-Hardened | 151.0 | 1.0018 | -153 | -178 | -202 | -210 |
| Cold-Drawn 20% | 137.0 | 1.0011 | -210 | - | - | - |
| Cold-Drawn 20% and AgeHardened | 186.5 | 1.0019 | -130 | -150 | -182 | -210 |
| Cold-Drawn 50% | 151.3 | 1.0010 | -210 | - | - | - |
| Cold-Drawn 50% and AgeHardened | 198.0 | 1.0019 | -130 | -150 | -182 | -210 |
Recommended Tool Types & Machining Conditions:
| Operations | Carbide Tools |
| Roughing, with severeinterruption | Turning or Facing C-2 andC-3 grade: Negative rakesquare insert, 45° SCEA1,1/32 in. nose radius. Tooholder: 5° neg. back rake5° neg. side rake. Speed:30-50 sfm,0.004-0.008 in.feed, 0.150 in depth of cut.Dry2, oil3, or water-base coolant 4. |
| Normal roughing | Turning or Facing C-2 orC-3 grade: Negative ratesquare insert, 45° SCEA,1/32 in nose radius. Tooholder: 5° neg. back rake5° neg. side rake. Speed:90 sfm depending on rigidity of set up, 0.010 infeed, 0.150 in. depth ofcut. Dry, oil, or water-base coolant. |
| Finishing | Turning or Facing C-2 0rC-3 grade: Positive rakesquare insert, if possible45° SCEA, 1/32 in.noseradius. Tool holder: 5° pos.back rake, 5° pos. siderake.Speed: 95-110 sfm0.005-0.007 in. feed,0.040 in. depth of cut. Dryor water-base coolant. |
| Rough Boring | C-2 or C-3 grade: lf inserttype boring bar, use standard positive raketools with largest possibleSCEA and 1/16 in. nose radius. lf brazed tool bargrind 0° back rake, 10° posside rake, 1/32 in. nose radius and largest possible SCEA.Speed: 70 sfm depending on the rigidityof setup, 0.005-0.008 infeed, 1/8 in. depth of cut.Dry, oil or water-base coolant. |
| Finish Boring | C-2 or C-3 grade: Usestandard positive raketools on insert type bars.Grind brazed tools as fofinish turning and facingexcept back rake may bebest at 0°. Speed: 95-110sfm,0.002-0.004 in feed.Water-base coolant. |
Processing Flow Chart:
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
1998
Total Annual:
70 million-100 million
Employee Number:
50~60
Ecer Certification：
Verified Supplier
Hunan Dinghan New Material Technology Co.,Ltd. (DINGSCO) specialized in Nickel Based Corrosion Resistant and High Temperature alloys products which used in the world’s most technically demanding industries and applications. We have complete advanced technology facilities to produc... Hunan Dinghan New Material Technology Co.,Ltd. (DINGSCO) specialized in Nickel Based Corrosion Resistant and High Temperature alloys products which used in the world’s most technically demanding industries and applications. We have complete advanced technology facilities to produc...
Get in touch with us
Leave a Message, we will call you back quickly!