Red Shallow Pot Alnico 5 Magnets With Countersunk Hole

Alnico Magnet is composed primarily of Aluminum,Nickel,Cobalt,Copper and Iron.

It have very good corrosion resistence and high max working temperature,can reach 550deg.C.

Although other materials offer greater energy and coercivity values,the high remanence and thermal stability of Alnico makes it the most cost effective material for certain applications,like generator,microphone lifting,voltmeters and measuring instruments.

It is widely applied in high stability fields as aerospace,military,automobiles and security system.

AlNiCo magnet is composed of Aluminum, Nickel, Cobalt, and a few transition metals. They have excellent temperature stability, high residual induction, and relatively high energies. AlNiCo magnet may be manufactured in complex shapes, such as horseshoes, which is otherwise not possible with other magnet materials. They represent the most versatile magnets available.
Manufacturing Process
Alnico magnet is manufactured through either casting or sintering processes. Cast magnet is manufactured by pouring a molten metal alloy into a mold and then further processing it through various heat-treat cycles. The resulting magnet has a dark gray exterior appearance, and may have a rough surface. Machined surfaces have a shiny appearance similar to steel. Sintered magnet is manufactured by compacting fine Alnico powder in a press, and then sintering the compacted powder into a solid magnet.

Machining & Tolerance
Alnico magnet is hard and brittle, and prone to chipping and cracking. Special machining techniques must be used to machine this material. The Standard tolerances for Alnico magnet is +/- 0.1mm for ground dimensions, but sticter tolerances are possible if specially required.
Surface treatments
The corrosion resistance of Alnico magnet is considered excellent , and no surface treatments are required. However, Alnico magnet is easily plated if specially required.
Magnetizing & Packing
Alnico magnet requires magnetizing fields of about 3kOe. Because of their relatively low coercivities. Alnico magnet should be packed properly in order to assure that the magnet is not subjected to adverse repelling fields, since this could partially demagnetize the magnet.
Cast Alnico 5 is the most commonly used of all the cast Alnicos. This material is used extensively in rotating machinery, meters, instruments, sensing devices, and holding applications, to name a few.

Q: Are you a manufacturer or trade company?

A: We are the manufacturer.and not trading company.

Q: Which kind of magnetic products you supply?

A: We mainly supply various magnetic assembly,

Q:What’s the information you need before quotation?

A:We need the drawing or sample or your detailed request and quantity reqeust for magnetic assembly enquiry,we can give you solutions and design magnetic assemblies for you.

Q: How long for the lead time for samples and mass production?

A:About 7-15days for magnet samples and about 25-30days for mass production normally,which depepend on detailed magnetic products you need.

Q: If the magnetized magnets or magnetic assemblies can be sent out by air shipment?

A:Yes,they can be sent out by air shipment based on our standard air packing with iron sheet to shield the magnetic fields.

Q:What’s the shipping method for magnets or magnetic assemblies?

A:By ocean shipment,air shipment or express way by Fedex,DHL,UPS or TNT,which depend on gross weight per shipment or customer’s request.

Q:How do I send the enquiry to you?

A:Avoiding To mistake,we suggest you send us your by E-mail .