Polyester Orthopedic Cast Bandage Wound Care Medical Bone Fracture Fiber

Product Specification

         Medical POP Bandage Plaster Of Paris Bone Fracture Fiber Cast Tape Polyester Wound Care Orthopedic Cast Bandage

Description:

HENAN AILE INDUSTRIAL CO., LTD is a company for operating medical disposables. Plaster Of Paris Bandage is made of sizing gauze bandage and plaster of paris powder. After soaking in water, it can be hardened and shaped in a short time. It has strong shaping ability and good stability. It is used for orthopaedic or orthopedic fixation, molds, auxiliary appliances for prostheses, and protective brackets for burns.

Application: 

It is suitable for orthopedic fracture fixation, external fixation of orthopedic surgery, inflammatory limb immobilization, osteomyelitis, bone tuberculosis, bone tumor surgery and bone arthroplasty limb fixation. It can also be used to make pallets, prosthetic auxiliary tools and various supporting tools. Auxiliary and other mold model making.

How to operate?

1.  Immersion: Immerse a roll of product at an angle of 45 degrees into warm water until no continuous air bubbles are generated.

2.  Squeeze: Take out the product and squeeze the product from both ends to the middle with both hands.
3. Winding: evenly wind the product on the affected part.
4. Leveling: When wrapping, it should be leveled by hand while wrapping.

A POP (Plaster of Paris) bandage, also known as a plaster bandage or cast bandage, is a type of medical bandage used for immobilizing and supporting fractured bones or injured limbs. Here are some key points about POP bandages:

Material: POP bandages are made of a fabric material, usually cotton, which is impregnated with a mixture of Plaster of Paris and water. Plaster of Paris is a white powdery substance derived from gypsum.

Setting and Hardening: When the POP bandage is applied to the affected area, the water in the plaster reacts with the plaster powder, causing it to set and harden. This process creates a rigid and supportive cast around the injured limb.

Immobilization: POP bandages are primarily used to immobilize and stabilize broken bones or injured joints, providing support and preventing movement during the healing process. The cast helps to protect the injured area and maintain proper alignment for bone healing.

Custom Fit: POP bandages are typically applied by a healthcare professional who molds and shapes the bandage directly on the patient's limb. This allows for a custom fit that conforms to the specific contours of the injured area.

Breathability: While POP bandages provide stability and support, they are not breathable. The plaster material can inhibit the passage of air, which may cause discomfort or skin irritation in some cases. To address this, healthcare professionals may create windows or openings in the cast to allow for ventilation.

Duration of Use: The length of time a POP bandage needs to be worn depends on the severity of the injury and the rate of healing. Generally, the cast remains in place for several weeks, but healthcare professionals will monitor the healing progress and determine when it should be removed.

Care and Maintenance: It is important to keep the POP bandage dry to prevent it from becoming weakened or losing its supportive properties.

Patients are usually advised to protect the cast while bathing or showering and to avoid getting it wet. In case of any damage or discomfort, it is essential to seek medical attention.

Please note that the information provided here is for general knowledge, and it's important to consult with a healthcare professional for specific guidance and treatment options for your particular situation.

 Precautions:

3.1  When the plaster bandage is dipped, the water temperature must be 25°C-30°C, and the dipping time is about 5-15 seconds.
3.2  The winding process of the plaster bandage must be completed within its curing time.
3.3  Store in a room with relative humidity not exceeding 80%, no corrosive gas and good ventilation.

About the Size and Color:(Customized)

(Special specifications are produced according to customer requirements)