Automatic Nail Making Machine Z94

Product Specification

Apart from the general steel nails, our newly developed high speed automatic nail making machine with low noise generation also can manufacture special shaped nails such as linoleum nails, roofing nails, double cap nails, U-shaped nails, twist nails, concrete nails, etc. This equipment consists of lubricating system and driving system. The driving system covers wire feeding, wire clamping, cutting, and stamping.

Z94-1C Automatic Nail Making Machine
Z94-1C automatic nail making machine can produce 450 pieces of nails per minute. All those nails come with the length ranging from 9mm to 25mm.

Parameters

Z94-2C Automatic Nail Making Machine
Z94-2C automatic nail making machine is used to manufacture 16mm to 50mm long nails. Its production rate is 350 pieces per minute.

Parameters

Z94-3C Automatic Nail Making Machine
Z94-3C automatic nail making machine comes with the production rate up to 320 pieces per minute. It is applicable for the nails with the length from 30mm to 75mm.

Parameters

Z94-4C Automatic Nail Making Machine
Z94-4C automatic nail making machine is specially designed for making the nails with the length from 2inch to 4inch. The production output is 280 pieces per minute.

Parameters

Z94-5.5C Automatic Nail Making Machine
Z94-5.5C automatic nail making machine whose production rate is 180 pieces per minute is designed for making the nails of 80mm to 150mm long.

Parameters

Z94-6.5C Automatic Nail Making Machine
Z94-6.5C automatic nail making machine designed for manufacturing the 100mm to 200mm long nails can produce 160 pieces per minute.

Parameters

In the nail making process, our equipment has the auxiliary machines like wire reel, nail cutter grinder, and nail polishing machine. The main wearing parts are nail mold, nail knife, and punch pin.

Production Principle
This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional nail making machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gear.

Production Process
The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically eject through the ejector.

Parameters

Wire Reel
It is used for the wire coil laying Wire-laying frame/Wire reel

Nail Cutter Grinder
It is used for grinding the nail knife by the grinding wheel.
The necessary auxiliary for nail making machines. This grinder is used for keeping nail knife be sharp , and it's special grinder for nail knife ( nail cutter )

Nail Polishing Machine
This machine is used for polishing the nails, caps, etc. After put into the roller, the finished nail will be free from sharp edges and greasy dirt after having been rolled together with the sawdust for about 1 hour. Then, use the sieve plate to separate the sawdust and nails. The nail could become brighter and anti-rust after polishing.

Parameters

Maintenance
1) Ensure the cleanness of the automatic nail making machine, and the nail mold should be frequently washed. Do not use the rusty wire for nail making.
2) Be sure the well lubrication of the nail making machine before starting. Especially for the new nail making machine, frequently lubricate the machine parts with oil, grease.
3) Regularly use the nail cutter grinder to grind the nail knife.
4) When operating the machine, you should always pay attention to the unusual noise as well as the temperature changes of the frictional parts.

Rizhao Jiuheng is a professional automatic nail making machine manufacturer and supplier in China. We also offer wire drawing machine, wire hanger making machine, well type annealing furnace, and much more.