Suzhou Hongjinli Gas Equipment Co., Ltd.
| Name | Adsorption Air Dryer |
| dew point of compressed air | -40℃ |
| Brand Name | Hongjinli |
View Detail Information
Explore similar products
compressed Adsorption Air Dryer
Modular Adsorption dryer for compressed air drying Compressed
Desiccant Heatless Adsorption Dryers
Blast thermal adsorption type air dryer Compressed air treatment Hongjinli
Product Specification
| Name | Adsorption Air Dryer | dew point of compressed air | -40℃ |
| Brand Name | Hongjinli | ||
| High Light | adsorption type air dryer ，Compressed air treatment Hongjinli ，Adsorption Dryers Hongjinli | ||
Adsorption Air Dryer
Freezing-adsorption combined air dryer Hongjinli Company's BC series energy-saving freezing-adsorption combined low dew point compressed air drying device is a new type of compressed air drying device. It is an organic combination of a freezing dryer and a microthermal regeneration dryer. The two There is a close and inseparable internal connection with the word flow setting.
The combined dryer adopts the newly developed drying process. It is different from the simple process of connecting a cold dryer and an absorbing dryer in series. The process flow is: the air compressor sends compressed air through the rear cooler, and the first choice is to change the drying process. It exchanges heat with the dried low-temperature compressed air in the heater to lower the temperature, and then enters the evaporator to be further cooled to about 2°C. At this dew point, most of the water in the compressed air has become liquid and is discharged, reducing the water content to very little. The compressed air enters the adsorption tower for further drying and water removal. Finally, the low-temperature dry compressed air enters the heat exchanger to cool the high-temperature humid air. At the same time, its temperature also rises, which can prevent condensation on the outer wall of the compressed air delivery pipeline. After heating, A small part of the compressed air is used as regeneration gas for the adsorbent to improve regeneration efficiency and reduce energy consumption.
Features
1. Features: Integrated structure, no foundation installation.
2. The compressed air has good quality and low dew point, which can reach -20~70℃.
3. Gas consumption can be adjusted by 3-5%.
4. The desiccant has a long service life, generally more than 3 years.
5. Microcomputer program control, easy to operate
Operating conditions
Working pressure: 0.6~1.0MPa
Pressure dew point: -20℃~-70℃
Desiccant: activated alumina or molecular sieve
Air inlet temperature: 0℃~45℃
Cooling method: air cooling, water cooling
Air consumption: ≤5%
Regeneration method: heatless regeneration
Pressure drop: ≤0.025MPa
Control method: PIC electronic control
Installation method: indoor without foundation
| Refrigerated-adsorption combined air dryer technical parameters | |||||
| Model | Air treatment(m3/min) | Power supply(V/50Hz) | Pipe diameter(mm) | Dimensions(length x width x height mm) | Equipment weight(kg) |
| BC0030 | 3.8 | 220/50 | DN25 | 1150X700X1800 | 220 |
| BC0040 | 5.5 | 220/50 | DN40 | 900X1300X1800 | 370 |
| BC0060 | 6.8 | 220/50 | DN40 | 1000X1300X1800 | 400 |
| BC0080 | 8.8 | 220/50 | DN50 | 1060X1400X2000 | 600 |
| BC0100 | 11.5 | 220/50 | DN50 | 1160X1400X1900 | 650 |
| BC0120 | 14 | 380/50 | DN65 | 1160X1600X1900 | 800 |
| BC0150 | 16 | 380/50 | DN65 | 1260X1600X2000 | 900 |
| BC0200 | 22.8 | 380/50 | DN80 | 1500X2000X2050 | 1500 |
| BC0250 | 28.5 | 380/50 | DN80 | 1700X2000X2180 | 1700 |
| BC0300 | 35 | 380/50 | DN80 | 1700X2000X2220 | 2100 |
| BC0400 | 45 | 380/50 | DN100 | 2000X2100X2400 | 2500 |
| BC0500 | 55 | 380/50 | DN100 | 2200X2100X2500 | 3100 |
| BC0600 | 65 | 380/50 | DN125 | 2400X2200X2650 | 3500 |
| BC0800 | 85 | 380/50 | DN150 | 2600X2600X2900 | 4200 |
| BC1000 | 105 | 380/50 | DN150 | 3000X2800X3000 | 5200 |
| BC1200 | 120 | 380/50 | DN200 | 3200X3000X3000 | 5800 |
| BC1600 | 160 | 380/50 | DN200 | 3800X3300X3000 | 7600 |
| BC2000 | 200 | 380/50 | DN200 | 4200X3500X3000 | 9500 |
| Note: BX0005-BX2000 models are twin-tower traditional structures; (LH) is a low-heat adsorption dryer | |||||
Company Details
Business Type:
Manufacturer,Exporter
Employee Number:
>100
Ecer Certification：
Verified Supplier
Suzhou Hong Jin Li Gas Equipment Co., Ltd. is headquartered in the Jiangnan region of rivers and lakes of Suzhou, is a company engaged in air separation nitrogen, hydrogen, oxygen and equipment research and development, manufacturing and related technology consulting services of high-tech enterprise... Suzhou Hong Jin Li Gas Equipment Co., Ltd. is headquartered in the Jiangnan region of rivers and lakes of Suzhou, is a company engaged in air separation nitrogen, hydrogen, oxygen and equipment research and development, manufacturing and related technology consulting services of high-tech enterprise...
Get in touch with us
Leave a Message, we will call you back quickly!