Suzhou Hongjinli Gas Equipment Co., Ltd.
| Brand Name | Hongjinli |
View Detail Information
Explore similar products
Precision removing car oil filter for Compressed Air Systems Hongjinli
In Line Oil Removal Cartridge Filters
Precision Oil Removing Filter Oil Water Separation Filter Cartridge
Oil Water Separation Filter Cartridge
Product Specification
| Brand Name | Hongjinli | ||
| High Light | Compressed Oil Filter ，Inline Oil Removing Filter ，Coalescing Oil Removing Filter | ||
Oil Removing Precision Filter
Description
Air filtration principle
Gas and liquid filtration operate on completely different principles, as particles behave significantly differently in air and liquid. Integrated liquid mainly relies on "blocking"; and the key to effective air filtration lies in three basic filtration principles:
1. "Directly capture" larger and heavier particles that move in a straight line;
2. "Inertial collision" is used to capture particles that are smaller, lighter and change direction slightly with the airflow;
3. "Brownian motion" Very small particles are filtered out due to "Brownian motion". Once the particles hit the fiber, they are firmly attracted by van der Waals forces, electrostatic attraction and vacuum suction. According to research, for depth-type air filtration, as long as it can completely filter out particles of 0.03μm, it can filter out particles of 0.01μm size.
Filter element classification
AO grade primary filter
Used to remove particles above 1μm, and can condense liquid oil and water. At 21℃, the oil mist content does not exceed 0.5mg/m (PPM)
AA grade fine filter
Used to remove dust particles larger than 0.01μm including oil and water. Under 21C conditions, the oil mist content does not exceed 0.01mg/m3 (PPM) (requires pre-AO level)
AX level high efficiency filter
Used to remove particles larger than 0.01μm including oil and water. Under 21C conditions, the oil mist content does not exceed 0.001mg/m (PPM) (requires pre-AO level)
AR grade universal dust filter
Used to remove dust particles above 1μm (after placing in the suction dryer)
ACS grade activated carbon filter
Used to remove oil vapor and hydrocarbon odors,
Under 21C conditions, the oil mist content does not exceed 0.003mg/m (PPM) (excluding methane, requiring a pre-AO level)
AAR grade high efficiency dust removal filter
Used to remove dust particles above 0.01μm. (Place it after the vacuum dryer)
Working conditions and technical indicators
Maximum working pressure :<1.6MPa
Recommended maximum operating temperature :<66 ° C
Recommended minimum operating temperature :<1.5 ° C
| Oil removing precision filter technical parameters | |||||||
| MODEL | Air pipe diameter | Air handling capacity(m³/min) | Dimensions(mm) | Weight(kg) | Filter element/quantity | ||
| Threaded interface | |||||||
| BF0005(G) | DN20(G¾") | 0.8 | 100 | 270 | 26 | 1.1 | BE0005 |
| BFO010(G) | DN20(G3¾*) | 1.8 | 100 | 270 | 26 | 1.4 | BE0010 |
| BF0020(G) | DN25(G1") | 2.8 | 100 | 270 | 26 | 1.5 | BE0020 |
| BF0030(G) | DN25(G1") | 3.8 | 115 | 340 | 40 | 2.6 | BE0030 |
| BF0040(G) | DN40(G1½*) | 5.5 | 115 | 380 | 40 | 3.3 | BE0040 |
| BF0060(G) | DN40(G1½*) | 6.8 | 115 | 380 | 40 | 3.5 | BE0060 |
| BF0080(G) | DN50(G2*) | 8.8 | 135 | 690 | 50 | 4.5 | BE0080 |
| BF0100(G) | DN50(G2") | 11.5 | 135 | 690 | 50 | 4.8 | BE0100 |
| BF0120(G) | DN65(G2½*) | 14 | 160 | 870 | 65 | 10 | BE0120 |
| BF0150(G) | DN65(G2½*) | 19 | 160 | 870 | 65 | 12 | BE0150 |
| BF0250(G) | DN80(G3) | 28.5 | 220 | 790 | 184 | 17 | BE0250 |
| Flange interface | |||||||
| BF0300(F) | DN80(F3) | 35 | 400 | 1036 | 170 | 48 | BE0300 |
| BF0400(F) | DN100(F4) | 45 | 459 | 1076 | 170 | 51 | BE0400 |
| BF0500(F) | DN100(F4) | 55 | 565 | 860 | 670 | 68 | BE0250X2 |
| BF0600(F) | DN125(F5) | 65 | 565 | 1150 | 965 | 120 | BE0300X2 |
| BF0800(F) | DN150(F6) | 85 | 570 | 960 | 817 | 130 | BE0400X2 |
| BF1000(F) | DN150(F6) | 105 | 570 | 1250 | 993 | BE0300X3 | |
| BF1200(F) | DN200(F8) | 120 | 670 | 1010 | 820 | BE0400X3 | |
| BF1400(F) | DN200(F8) | 140 | 670 | 1045 | 895 | BE0300X4 | |
| BF1600(F) | DN200(F8) | 160 | 670 | 1226 | 1036 | BE0400X4 | |
| BF2000(F) | DN250(F10) | 200 | 800 | 1366 | 1128 | BE0400X5 | |
| BF2500(F) | DN250(F10) | 250 | 800 | 1420 | 1178 | BE0400X6 | |
| BF3000(F) | DN300(F12) | 300 | 950 | 1268 | 996 | BE0400X7 | |
| BF3600(F) | DN300(F12) | 360 | 950 | 1500 | 1220 | BE0400X8 | |
| Correction coefficients under other pressures are shown below : | |||||||||||
| Working pressure | 1 | 2 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 20 |
| Pressure coefficient | 0.38 | 0.53 | 0.65 | 0.85 | 1 | 1.13 | 1.25 | 1.36 | 1.46 | 1.56 | 1.7 |
Company Details
Business Type:
Manufacturer,Exporter
Employee Number:
>100
Ecer Certification：
Verified Supplier
Suzhou Hong Jin Li Gas Equipment Co., Ltd. is headquartered in the Jiangnan region of rivers and lakes of Suzhou, is a company engaged in air separation nitrogen, hydrogen, oxygen and equipment research and development, manufacturing and related technology consulting services of high-tech enterprise... Suzhou Hong Jin Li Gas Equipment Co., Ltd. is headquartered in the Jiangnan region of rivers and lakes of Suzhou, is a company engaged in air separation nitrogen, hydrogen, oxygen and equipment research and development, manufacturing and related technology consulting services of high-tech enterprise...
Get in touch with us
Leave a Message, we will call you back quickly!