China factories

China factory - Suzhou Sumairui Gas System Co.,Ltd.

Suzhou Sumairui Gas System Co.,Ltd.

  • China,Suzhou
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement
China Hydrogen Nitrogen Separation Psa In Hydrogen Gas Generation 150Nm3/Hr New Clean
China Hydrogen Nitrogen Separation Psa In Hydrogen Gas Generation 150Nm3/Hr New Clean

  1. China Hydrogen Nitrogen Separation Psa In Hydrogen Gas Generation 150Nm3/Hr New Clean

Hydrogen Nitrogen Separation Psa In Hydrogen Gas Generation 150Nm3/Hr New Clean

  1. MOQ: 1 set
  2. Price: Negotiable
  3. Get Latest Price
Payment Terms L/C, T/T, Western Union, MoneyGram
Supply Ability 100 sets/months
Delivery Time 30-45 days
Packaging Details Exporting wooden case /Film packing
Material Mild steel
Capacity 100 Nm3/hr
Purity 99.99-99.999%
Pressure 10 bar
Dew point -60 ℃
Towers 4
Operation mode Fully automatic
IP grade IP54
Explosion-Proof Customized
Application Green & new field
Brand Name SUMAIRUI GAS
Model Number OSH-100
Certification ISO9001, CE, BV, SGS, TUV, ASME, GOST,NB,NR ETC
Place of Origin SUZHOU, CHINA

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Payment Terms L/C, T/T, Western Union, MoneyGram Supply Ability 100 sets/months
Delivery Time 30-45 days Packaging Details Exporting wooden case /Film packing
Material Mild steel Capacity 100 Nm3/hr
Purity 99.99-99.999% Pressure 10 bar
Dew point -60 ℃ Towers 4
Operation mode Fully automatic IP grade IP54
Explosion-Proof Customized Application Green & new field
Brand Name SUMAIRUI GAS Model Number OSH-100
Certification ISO9001, CE, BV, SGS, TUV, ASME, GOST,NB,NR ETC Place of Origin SUZHOU, CHINA
High Light psa in hydrogen gas generationhydrogen nitrogen separation psapsa hydrogen separation

PSA hydrogen generator with CE/SGS/TUV certificates capacity 150Nm3/hr for new clean energy application

 

Separation by adsorption

 

The Pressure Swing Adsorption (PSA) technology is based on a physical binding of gas molecules to adsorbent material. The respective force acting between the gas molecules and the adsorbent material depends on the gas component, type of adsorbent material, partial pressure of the gas component and operating temperature. A qualitative ranking of the adsorption forces is shown in the figure below. The separation effect is based on differences in binding forces to the adsorbent material. Highly volatile components with low polarity, such as hydrogen, are practically non-adsorbable as opposed to molecules as N2, CO, CO2, hydrocarbons and water vapour.

 

Consequently, these impurities can be adsorbed from a hydrogencontaining stream and high purity hydrogen is recovered. Adsorption and regeneration The PSA process works at basically constant temperature and uses the effect of alternating pressure and partial pressure to perform

 

 

Adsorption and desorption.

 

 

Since heating or cooling is not required, short cycles within the range of minutes are achieved. The PSA process consequently allows the economical removal of large amounts of impurities. The figure on page 5 illustrates the pressure swing adsorption process. It shows the adsorption isotherms describing the relation between partial pressure of a component and its equilibrium loading on the adsorbent material for a given temperature. Adsorption is carried out at high pressure (and hence high respective partial pressure) typically in the range of 10 to 40 bar until the equilibrium loading is reached. At this point in time, no further adsorption capacity is available and the adsorbent material must be regenerated. This regeneration is done by lowering the pressure to slightly above atmospheric pressure resulting in a respective decrease in equilibrium loading. As a result, the impurities on the adsorbent material are desorbed and the adsorbent material is regenerated. The amount of impurities removed from a gas stream within one cycle corresponds to the difference of adsorption to desorption loading.

 

 

After termination of regeneration, pressure is increased back to adsorption pressure level and the process starts again from the beginning.

 

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2014

  • Total Annual:

    15000000-20000000

  • Employee Number:

    85~100

  • Ecer Certification:

    Verified Supplier

Sumairui Gas System CO., Ltd located Suzhou High technology district, the company size over 40000 m2, with two more than 8000 m2 modernized standard factories and one 2000 m2 Business office building.   Sumairui Gas devoted in gas equipment research and development, manufacture, sale... Sumairui Gas System CO., Ltd located Suzhou High technology district, the company size over 40000 m2, with two more than 8000 m2 modernized standard factories and one 2000 m2 Business office building.   Sumairui Gas devoted in gas equipment research and development, manufacture, sale...

+ Read More

Get in touch with us

  • Reach Us
  • Suzhou Sumairui Gas System Co.,Ltd.
  • No 161,ZhongfengJie, Suzhou High technology district, Suzhou
  • https://www.n2-nitrogengenerator.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement