CHANGSHA SANCHANG PUMP CO., LTD.
| Payment Terms | L/C, T/T |
| Supply Ability | 300pcs/month |
| Delivery Time | 30 working days |
| Packaging Details | Plywood Case |
| Flow Capacity | 3.75-7.5m3/h |
| Delivery Head | 600m |
| Inlet/Outlet Dia. | 50mm/50mm |
| Working Pressure | <9MPa |
| Liquid Temperature | 0-80 ℃ |
| Application | Clean Water, Sewage, Hot Water, Corrosive Liquid, Mining Water |
| Material | Cast Iron, Cast Steel, S.S304, S.S316, Duplex S.S2205 |
| Dirven By | Electric Motor / Diesel Engine |
| Voltage | 380V/400V/415V/440V/460V |
| Speed | 2980/3560rpm |
| Seal | Gland Packing/Mechanical Seal |
| Frequency | 50/60Hz |
| Brand Name | SANCHANG |
| Model Number | D6-50X2-12 |
| Certification | ISO9001 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
ISO9001 119m3/H high pressure Multistage Pump With Impeller In Series D155-30X7
420m Head 300-440m3/H Horizontal Multi Stage Pump 4 Stage Water Pump
Ring Section Self Balancing 85m3/H Multistage Water Pump 50Hz/60Hz
ZMD Series 15-30m3/H Multistage Water Pump Low Noise D25-80X7P
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 300pcs/month |
| Delivery Time | 30 working days | Packaging Details | Plywood Case |
| Flow Capacity | 3.75-7.5m3/h | Delivery Head | 600m |
| Inlet/Outlet Dia. | 50mm/50mm | Working Pressure | <9MPa |
| Liquid Temperature | 0-80 ℃ | Application | Clean Water, Sewage, Hot Water, Corrosive Liquid, Mining Water |
| Material | Cast Iron, Cast Steel, S.S304, S.S316, Duplex S.S2205 | Dirven By | Electric Motor / Diesel Engine |
| Voltage | 380V/400V/415V/440V/460V | Speed | 2980/3560rpm |
| Seal | Gland Packing/Mechanical Seal | Frequency | 50/60Hz |
| Brand Name | SANCHANG | Model Number | D6-50X2-12 |
| Certification | ISO9001 | Place of Origin | CHINA |
| High Light | 7.5m3/h High Pressure Centrifugal Pump ，3.75m3/h High Pressure Centrifugal Pump ，ISO9001 Multistage Centrifugal Pump | ||
ISO9001 3.75-7.5m3/H High Pressure Multistage Centrifugal Pump D6-50X2-12 (Max 600m)
| Parts Name | Clean Water | Sewage | Hot Water | Corrosive Liquid | Oil Liquid |
| Pump Body | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Shaft | Cast Iron | S.S420 | S.S420/42CrMo | S.S630 | S.S420/40Cr |
| Shaft Sleeve | Carbon Steel | S.S420 | S.S304 | S.S316/S.S630/S.S2205 | S.S304/S.S316 |
| Impeller | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Wearing Ring | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Bearing | China Make/NSK/SKF/Customized | ||||
| Seals | Mechanical Seals/Gland Packing Seals | ||||
The D series Multistage Ring Section Centrifugal Water Pump is a utility-grade, high-pressure, ring section pump with heavy duty, segmental ring, diffuser design. Axial thrust balance device with stacked rotor construction. Suitable for boiler feed pump and high building, long distance water transferring.
Features and Benefits
* Greater reliability from radially split pressure casings, ensuring overall pump concentricity and rotor alignment.
* Improved service life and tolerance to changing conditions due to precision-cast diffusers that equalize radial loads and increase bearing, wear ring and seal life.
* Precise hydraulic configuration made possible by the modular segmental ring diffuser design plus numerous options.
Adjusting the number of stages in a ring section pump does not affect optimal flow, but allows you to achieve the desired pressure requirements. So for example, let’s say you have a ring section pump with two impellers that produces a flow of 6.3m3 per hour at 100m of head (pressure). When you add another stage, the rated flow (6.3m3/h) stays the same, but the pressure increases to 150m of head. You could add a fourth stage to get 200m of head, a fifth stage to get 250m of head, and so on, until max stages of 12.
Keep in mind that as the liquid’s pressure increases as it passes through each stage, axial thrust begins to occur as a result of the difference in pressure between the suction eye and the back of the impeller. With a difference in pressure across the impellers, axial thrust tries to push the pump shaft toward the suction eyes. This axial thrust must be offset in order for the pump to operate properly, so the rotor must be designed to be hydraulically balanced to preserve bearing life. Inter-stage diffusers (a ring of fixed vanes) minimize radial loads (force that acts at right angles to the shaft), while carefully controlling fluid flow for a more efficient conversion of velocity head into pressure head.
Parameters of Multistage Centrifugal Water Pump D6-50X2-12
| Flow Capacity | 3.75-7.5 m3/h | Delivery Head | 100-600 m |
| Inlet/Outlet Dia. | DN50/DN50 mm | Working Pressure | ≤ 6.0 MPa |
| Liquid Temperature | 0 - 80 ℃ | Driven By | Electric Motor / Diesel Engine |
| Seal Type | Mechanical seal / Gland packing | Liquid | Clean water or similar |
| Material of Construction | Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.S2205 | ||
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2003
Total Annual:
10,000,000-15,000,000
Employee Number:
95~120
Ecer Certification：
Active Member
SANCHANG PUMP is a professional pump manufacturer located in Hunan, China. We have our own machinery workshop, assembly line, testing facilities, and warehouse. Now, we mainly produce industrial pumps like double suction split case centrifugal water pump, multistage centrifugal water pump, end sucti... SANCHANG PUMP is a professional pump manufacturer located in Hunan, China. We have our own machinery workshop, assembly line, testing facilities, and warehouse. Now, we mainly produce industrial pumps like double suction split case centrifugal water pump, multistage centrifugal water pump, end sucti...
Get in touch with us
Leave a Message, we will call you back quickly!