Vacuum Fat Freezing Machine For Fat Reduction In Beauty Clinic Hospital

Product Specification

Cryo No invasive Fat Freezing Machine Coolplas vacuum cryotherapy fat freezing fat cell body melting

Features--- fat freezing machine

How does coolplas work?

The treatment cup can absorb the fat in the treatment area to the cooling plate by a vacuum pressure. And the treatment probe can control the cooling temperature precisely during the treatment, which can eliminate fat cells in a particular part of the body. When the fat cells are in the cooling enviromnent which be precisely controlled, it will begin to do natural decomposition and clearance, to make the fat layer become thinner gradually.

Fat cells reducing process

1. Some stubborn fat bulges are immune to diet and exercise
2. Coolplas targets and cools fat cells to temperatures that trigger fat cell apoptosis.
3. No damage to nerves or other tissues because lipids in fat crystalize at a warmer temperature than water in other cell types.
4. Following treatment, fat cells enter an apoptotic death sequence and are gradually removed in the next few weeks and months by the immune system.
5. Fat layer thickness significantly reduced.
6. Fat layer reduction in targeted area leads to an improvement in flank appearance.

Advantages

1. Most popular way in losing weight In the market!
2. Special design for handpeice, no any pain feeling when finished the treatment.
3. No surgery, no anesthesia, no needles, no scarring, no downtime.
4. Single treatment can reduce 20-30% reduction in the fat layer
5. The CoolipoTwin Procedure is comfortable for most patients; They can read, work on their laptop computer, listen to music
6. Automatic adjustment of vacuum pressure control, very little noise at work.

Description of System Components

Colorful LCD touch screen: display specific information of controlling system;

Key Switch: power on and off

Main console: in-built cooling system, power system, control system, integrated circuit etc.

Middle size hand piece: cavity area: 250mm×50mm×115mm; effective treatment area: 156mm×86mm ；

Small size hand piece:cavity area: 145mm×50mm×93mm；effective treatment area:92mm×66mm；

Small size hand piece (flat open mouth):cavity area: 140mm×50mm×98mm；effective treatment area:92mm×66mm;

Handpiece Plug: Connection treatment handpiece and host

Handpiece holder: holding treatment handpiece

Preparations Before Operation

1) Recommended treatment parts: the upper arm, back, abdomen, love handle, leg and buttock;

2) Measure fat thickness of treatment part;

3) 10-60min; Set treatment time 10-60min based on fat thickness of treatment area;

4) Treatment area should be kept small; a large patch of treatment area could be divided into several small parts.

5) Number of treatment parts for each time should be below 2. The same treatment areas should not take second treatment within 2 months. Different treatment areas can take second treatment after 1 month. Then extra fat thickness can be reduced and burden of metabolism decreased.

6) Generally, it is suggested to carry out treatment based on provided clinical parameters, temperature range is from 0℃ to -8℃; if the operator is a professional doctor, temperature can be adjusted combining relevant factors. The temperature should not be below -8℃.

Treatment Process

1) Check whether patient’s heartbeat is normal and consult whether he or she has other contraindications (for detailed information, see 5.2 contraindications);

2) Measure fat thickness of treatment part ;

3) Clean treatment part;

4) Mark treatment area;

5) Unpack small packet of gelpad, and wipe handpiece edge and inside part;

6) unpack big packet of gelpad, and apply it into treatment area.

7) patient shall be in a sitting posture and the upper body should be kept 90 degree with thigh;

8) Choose proper treatment handpiece based on fat thickness.

9) Start the equipment, and operate according to device operation interface and complete parameters setting;

10) Gentlely apply treatment handpiece cavity on treatment area and click button on handpiece;

11) In order to make sure that handpiece is closely touched on treatment areas, press it and lightly swing it up and down and then fix handpiece.

12) Click the button on handpiece, start treatment.