Sanyuan Yinda Petroleum Machinery Co.,Ltd
| Packaging Details | Plywood case / Iron plate |
| Delivery Time | In stock |
| Payment Terms | T/T 30%DP, Balance before delivery |
| Supply Ability | In stock |
| Usage | drill rig |
| Application | Conveying mud and flushing fluids |
| Structure | Piston Pump |
| Standard or nonstandard | Standard |
| Type | Mud Pump |
| Product name | Mud Pump |
| Oem | Applicable |
| Condition | new |
| Place of Origin | China |
| Brand Name | YINDA |
| Certification | API 7K |
| Model Number | Triplex Mud Pump |
View Detail Information
Explore similar products
32PL Spray Pump Mud Pump Spares AH100101081600 AH36001-08B.11.00 Cast Iron
BOMCO Mud Pump Pinion Shaft AH1301010300 AH37001-02.00 4340 Alloy Steel
Housing Bolt Main Bearing Mud Pump Spares AH36001-02.16C HONGHUA HHF1600
JZR3-L8 Needle Valve Mud Pump Spares For Triplex Mud Pump API 7K Certification
Product Specification
| Packaging Details | Plywood case / Iron plate | Delivery Time | In stock |
| Payment Terms | T/T 30%DP, Balance before delivery | Supply Ability | In stock |
| Usage | drill rig | Application | Conveying mud and flushing fluids |
| Structure | Piston Pump | Standard or nonstandard | Standard |
| Type | Mud Pump | Product name | Mud Pump |
| Oem | Applicable | Condition | new |
| Place of Origin | China | Brand Name | YINDA |
| Certification | API 7K | Model Number | Triplex Mud Pump |
| High Light | mud pump expendables ，needle control valve ，Mud pump Rubber oil seal | ||
Oil Seal 9.125″ ×10.375″×0.625″, Pinion Shaft AH36001-03.08A AH36001-03.08A
Mud pump oil seal is the main seal in the crosshead system of the power end of the mud pump. The material is nylon, which belongs to the vulnerable parts of the mud pump.The oil seal ring is installed in the packing box and ACTS as a seal.
An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. Dynamic examples include rotating pump shafts and hydraulic cylinder pistons. Static applications of O-rings may include fluid or gas sealing applications in which: (1) the O-ring is compressed resulting in zero clearance, (2) the O-ring material is vulcanized solid such that it is impermeable to the fluid or gas, and (3) the O-ring material is resistant to degradation by the fluid or gas.
O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, reliable and have simple mounting requirements. They have been tested to seal up to 5000 psi (35 megapascals) of pressure. The maximum recommended pressure of an O-ring seal depends on the seal hardness and gland clearance.
Mud Pump Parts Model We Can Do
| BOMCO | F-500 | F-800 | F-1000 | F-1300 | F-1600 | F-1600HL | F-1600L | F-2200HL |
| Hong Hua | HHF-500 | HHF-800 | HHF-1300 | HHF-1600 | 3NB-1600F | 5NB-1600 | 5NB-2400 |
|
| HRSB | RSF-1300 | RSF-1600 |
| |||||
| RG | RGF-800 | RGF-1000 | RGF-1300 | RGF-1600 |
| |||
| Lanzhou | 3NB1000C | 3NB1300C | 3NB1600F | 3NB1600L |
|
|
|
|
| EMSCO | F-500 | F-800 | F-1000 | F-1300 | F-1600 | FD-1000 | FC-2200 | FB-1300 |
| Gardner Denver | PAH | P7 | P8/9 | P10/11 |
|
|
|
|
| National | 7-P-50 | 8-P-80 | 9-P-100 | 10-P-130 | 12-P-160 | 14-P-200 | 14-P-220 |
|
| Oilwell | A-850-PT | A-1100-PT | A-1400-PT | A-1700-PT |
|
|
|
|
| TSC | WF-500 | WF-800 | WF-1000 | WF-1300 | WF-1600 | WF-2000 | WF-2200 |
|
| IDECO | T-500 | T-800 | T-1000 | T-1300 | T-1600 |
|
|
|
| RUSSIA | UNBT-1180L | UNBT-950A | UNB-600 |
|
|
|
|
FAQ
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T is the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details, production details. Then we issue you an PI for your confirmation. You will be requested to do pr-e paid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4) How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.
More customer view:64-K-10 Pulsation Dampner-yindapump.com.pdf
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2002
Employee Number:
>100
Ecer Certification：
Active Member
Sanyuan Yinda Petroleum Machinery Co.,Ltd since 2002, is a professional manufacturer of mud pump parts, integrating research, manufacturing and trade together. The main products of our company are ceramic cylinder liner, bi-metal mud pump cylinder liner, valve assembly, piston assembly, hydr... Sanyuan Yinda Petroleum Machinery Co.,Ltd since 2002, is a professional manufacturer of mud pump parts, integrating research, manufacturing and trade together. The main products of our company are ceramic cylinder liner, bi-metal mud pump cylinder liner, valve assembly, piston assembly, hydr...
Get in touch with us
Leave a Message, we will call you back quickly!