Warm White 3000k 500mAh Smart Wireless Night Light

Product Specification

Wireless Night Light,Smart Wireless Sync Night lamp

Smart Wireless Sync Night lamp----User Manual

Description

Smart Wireless sync light is a set of wireless connected lamps, which consists of two (or more) rechargeable night lamps, one as a master lamp, the other as a servant lamp. By touching the power button on the top of the night lamp, the lamp could be turned on/off. User can adjust the brightness by pressing the button on the bottom of the night lamp, and the night lamp has a memory setting for the level of brightness. The master lamp can sync control with any servant lamps within an effective control range (the servant lamp will be light up/off as the master lamp is turned on/off). One master lamp can pair with unlimited servant lamps, but one servant lamp could be sync control with 10 pieces master lamps at most. The sync control between master lamp and servant lamp only works under the situation that they’ve been paired successfully ahead of time.

Specification

1. Master lamp/Bedside lamp

A. Brightness Level: 3LM,9LM,15LM,21LM,30LM adjustable

2. Color temperature:3000k warm white
3. CRI:≥80.<br>
4. Polymer lithium battery:500mAh.
5. Play time: 7 hours with maximum brightness and 60 hours with low brightness. Lamp stand by time is six months. Standby mode could last around 3 months if the night lamp is on less than 15 minutes every day .
6. Size and weight: 86x86x38mm,～110g.
7. Hanging method: magnet, nails, or string.

2. Servant lamp/Night lamp

1. Brightness Level: 3LM,9LM,15LM,21LM,30LM adjustable.
2. Color temperature:3000k warm white
3. CRI:≥80
4. Polymer lithium battery:500mAh.
5. Play time: 7 hours with maximum brightness and 60 hours with low brightness. Lamp stand by time is 45 days. Standby mode could last around one month if the night lamp is on less than 15 minutes every day.
6. Size and weight: 86x86x38mm,～110g.
7. Hanging method: magnet, nails, or string.

3. Wireless connected: Indoor≤30M,Outdoor≤50M
4. Packing&accessories: master lamp , servant lamp, 0.4 M USB cable, φ25mm mental,User Manual.

Operation

1. Pairing mode

A. Make sure the servant lamp is off, then hold the button of the bottom for about 5 seconds until it is on .

B. Long touch the button on the top of the servent lamp for 5 seconds till it is flashing ,the servant lamp is ready for pairing .

C. Make sure the master lamp is off, then hold the button of the bottom for 5 seconds until it is on

D. Long touch the button on the top of the master lamp till it is flashing, then the master lamp is ready for pairing.

E. Once the servant lamp stops flashing and display a solid light, it means servant lamp has been paired with the master lamp successfully. Then long touch the button on the top of the master lamp for about 3 second to end the flashing light, and it will be off . Short touch the button on top of the master lamp to control both lamps for use.

2. Lighting

A. Master lamp/Bedside lamp

How to control the lights?

1. Turn on/off the lamp.

Long hold the button of the bottom for 5 seconds to turn on/off the lamp.

2. Make sure the lamp is on ,long touch the button of the top to turn on/off the light ,when the light is on ,short press the button of the botom to adjust the brightness from level 1 to level 5 , and it has a memory setting from the previous level of brightness. The brightness would be the same as the last time before the lamp was turned off.

How to Sync control servant lamp?

When the servant lamp is paired with the master lamp, all the servant lamps will be sync light up or off while the master lamp is turned on or off. All the servant lamps will have the same brightness as the memory record.

Input: Use a normal adaptor of 5V with the charging cable to charge the night lamp. Red indicator light means charging successfully. When the light changes to green means it is fully charged, and it takes approximately one hour to fully charge.

3. Warning

A. The servant lamp must be paired with a master lamp firstly, then the master lamp can sync control of the servant lamp.

B. The sync control range is around 50 meters, all operation only works within an effective control range.

C. When the servant lamp is under control of more than one master lamp, the sync operation would follow priority principle

D. Please use finger or palm to touch the power button to control the lamp.