Stationary Electric Industrial Soil Mixer WBZ600 Soil Mixing Equipment

Product Specification

WBZ600 Cement Stabilized Soil Mixing Machine introduction

The Jianxin brand WBZ600 Stabilized Soil Mixing Station production line adopts a forced continuous twin-shaft type in the form of agitation. It can mix gravel and stabilize soil and lime soil to stabilize soil. It is suitable for construction of highways, Class I highways, Class II highways, urban roads, airports, sports fields and other basic materials. It can use quicklime, hydrated lime (water content 10-15%), soil, Raw materials such as gravel, fly ash, and cement are used to produce base materials such as ash. Unlike common ram mixing plants, new users need special attention.
WBZ600 Stabilized Soil Mixing Station (mixing station) uses twin-shaft continuous linerless mixers for easy maintenance, even mixing and high production efficiency. The ingredients are electronically weighed or volume-measured, the measurement is accurate and reliable, and the ratio changes rapidly. The computer control system manages the entire process, with manual and automatic selection, convenient operation and good reliability. Speed adoption of international advanced frequency control or electromagnetic speed control will save energy, stepless speed, and fully guarantee the reliability of equipment operation. Intelligent turbine flowmeter for water supply, accurate calculation, intuitive display. Aggregate and finished material conveyor adopts seamless vulcanized joint ring tape or large angled wave rib belt, which is compact in structure, stable in operation, reliable in operation, not easy to deviate, and effectively improves the service life of the belt. Aggregate bins are modular or modular, flexible and suitable for different levels of demand.

Mixing system
The main body of 600T stabilized soil mixing plant adopts double-shaft compulsory continuous propulsion mixing mode and double-shaft compulsory-type linerless mixer; advanced performance. The shaft end seal uses world-class technology, and the shaft end support is completely separated from the shaft end seal. Mud and sand are difficult to enter the bearing, the replacement is quick and convenient, and the maintenance time is extremely short; the mixing drum has large capacity, uniform mixing and high productivity.

Batching system
The batching system of 600T stabilized soil mixing plant is composed of aggregate storage bin and belt conveyor; the block type silos are all connected by pin shaft, which is convenient to disassemble, quick to install, flexible in transportation and transportation; electromagnetic speed control belt conveyor can realize stepless speed regulation .

Conveyor system
The belt conveyor of 600T stabilized soil mixing plant is a collecting material and finished material conveying. It adopts small angle angle belt conveyor, high quality seamless vulcanized joint ring tape, compact structure, stable and reliable operation, not easy to deviation, and effectively improve belt service life.

Control System
The control system of 600T stabilized soil mixing plant has manual and automatic selection, convenient operation and good reliability. The operation of each component is centralized and controlled on the console. The whole set of equipment only needs one operator. The main electrical components are purchased from internationally renowned manufacturers, which fully guarantees the product quality.

Cement silo
The flaky cement silo of 600T stabilized soil mixing plant is designed and produced for the difficulties of packing and packing of cement silo, difficulty in on-site cylinder making, difficulty in transfer of construction site, and super high and super wide transportation. Cement silos (cement tanks) are in line with industry standards. The unloading height is 1.96 meters and 4.2 meters, and can also be processed according to user requirements.
The overall cement silo of the 600T stabilized soil mixing plant is a closed storage tank for storing grain, cement, fly ash and other materials. The tank body is equipped with a material level system, which can display the position and quantity of the material. There is a safety valve, a dust removal device is installed on the top of the warehouse to avoid dust pollution, and the arching device can relieve the solidification caused by the material deposition for too long.
The horizontal cement silo of the 600 stabilized soil mixing plant has a cylindrical structure, and the bottom is supported by four round tube legs. The whole warehouse is in the form of steel structure and welded; the top is provided with a dust collector and a pressure safety valve. The horizontal cement silo meets the industry standard.
The screw conveyor of 600 stabilized soil mixing plant adopts high quality steel pipe with good rigidity; double pitch blade reduces the degree of material conveying compression; high quality gearbox, heavy duty design, large torque and low noise; optional universal ball joint, It is convenient to turn the installation and adjustment;

Technical Parameters