Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co., Ltd
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 30sets/quarter |
| Delivery Time | 15-20 days |
| Packaging Details | Container |
| Product Name | Industrial Drying Equipment For Drying Wood Block |
| Model | 1.2×10 |
| Condition | New |
| Application | Wood Block |
| Cylinder diameter | 1200mm |
| Cylinder length | 10000mm |
| Cylinder volume | 11m³ |
| Cylinder rotary speed | 1-6r/min |
| Power | 7.5kw |
| weight | 10.7t |
| Brand Name | Lipu |
| Model Number | 1.2×10 |
| Certification | ISO9001:2008,CE,IQNet |
| Place of Origin | China |
View Detail Information
Explore similar products
Automatic High Efficiency Three Cylinder River Sand Dryer Machine in Mining
Eco - Friendly 3 Cylinder Sand Industrial Dryer Machine Triple Pass Design
Environmental Protection Industrial Sand Dryer Equipment , Three Cylinder Dryer
Msw Municipal Solids Waste Rotary Dryer Intelligent Control Industrial Drying
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 30sets/quarter |
| Delivery Time | 15-20 days | Packaging Details | Container |
| Product Name | Industrial Drying Equipment For Drying Wood Block | Model | 1.2×10 |
| Condition | New | Application | Wood Block |
| Cylinder diameter | 1200mm | Cylinder length | 10000mm |
| Cylinder volume | 11m³ | Cylinder rotary speed | 1-6r/min |
| Power | 7.5kw | weight | 10.7t |
| Brand Name | Lipu | Model Number | 1.2×10 |
| Certification | ISO9001:2008,CE,IQNet | Place of Origin | China |
| High Light | industrial dryer machine ，industrial dryer | ||
Energy Saving And High Capacity Industrial Drying Equipment For Drying Wood Block
System Introduction:
In recent years, with the increasing of environmental resources, the comprehensive utilization of
biomass energy has become more and more important to us. Due to the high moisture content of the
sawdust, broken wood, which leads the incomplete combustion, resulting in that the spark burns the
dust bag at the back of the drying plant, which not only causes the excessive emissions, but also it’s
with high cost to change the dust bag. In the process of producing wood products and biomass fuels
with high burning combustion value, wood chips and broken dregs are required to do the drying process.
Process Flow:
After being fed into the hopper, under the function of gravity the raw material will fall onto the belt
conveyor laid under the bottom of the hopper, and then which will be conveyed onto the screening
machine, the massive, strip and other irregular material will be separated out after screening, and
uniform particles will be conveyed to the feeding end of the dryer (The single cylinder or three cylinder
dryer will be chosen as per the service condition) by the belt conveyor under the screening machine.
The feeding end of the dryer is connected with heat source and the discharging end is linked with pulse
air pipes. The fire wall will be setted up in the hot blast stove in order to guarantee the safety of the
drying process, to eliminate the phenomenon of material burning in the dryer, and the heat passing
through pipe will be installed between the hot blast stove and the dryer as the section of heat buffer. The
material will brought into the diameter-transformed pulse pipe after being dried and the dehydration for
the first time inside of the dryer, which will be in a suspended boiling form at the large diameter of the
pulse pipe, and then it will be quickly dried after contacting with the exhausted heat wind from dryer.
And the material will be driven out of the pulse pipe by strong winds and moved into the first stage
cyclone collector when its water content reaches the design requirement, and 80% of dried material will
be collected, and then get into the second stage cyclone collector after passing through the induced
draft fan to collect the left material. The second stage cyclone collector can be replaced by the bag type
dust collector.
System Advantages:
Intensive drying strength with short drying time
The wood block industrial drying equipment has advanced design, which let the material has the full
contact in the dryer, the full surface area of the particles is the effective drying area, and it has Intensive
drying strength. With the pulse air flow dryer, drying time is only half of the regular dryer, the efficiency
of the drying machine is greatly increased
Low drying cost with high drying efficiency
The wood block industrial drying equipment has advanced structure, with small mall covered area, easy
to construct and to do maintenance. The thermal efficiency can reach 90% when it dries unbound water.
Technical Parameters:
|
Model | Cylinder diameter (mm) |
Cylinder length (mm) |
Cylinder volume (m3) |
Cylinder rotary speed (r/min) | Power (kW) |
Weight (t) |
| 0.6×5.8 | 600 | 5800 | 1.7 | 1-8 | 3 | 2.9 |
| 0.8×8 | 800 | 8000 | 4 | 1-8 | 4 | 3.5 |
| 1×10 | 1000 | 10000 | 7.9 | 1-8 | 5.5 | 6.8 |
| 1.2×5.8 | 1200 | 5800 | 6.8 | 1-6 | 5.5 | 6.7 |
| 1.2×8 | 1200 | 8000 | 9 | 1-6 | 5.5 | 8.5 |
| 1.2×10 | 1200 | 10000 | 11 | 1-6 | 7.5 | 10.7 |
| 1.2×11.8 | 1200 | 11800 | 13 | 1-6 | 7.5 | 12.3 |
| 1.5×8 | 1500 | 8000 | 14 | 1-5 | 11 | 14.8 |
| 1.5×10 | 1500 | 10000 | 17.7 | 1-5 | 11 | 16 |
| 1.5×11.8 | 1500 | 11800 | 21 | 1-5 | 15 | 17.5 |
| 1.5×15 | 1500 | 15000 | 26.5 | 1-5 | 15 | 19.2 |
| 1.8×10 | 1800 | 10000 | 25.5 | 1-5 | 15 | 18.1 |
| 1.8×11.8 | 1800 | 11800 | 30 | 1-5 | 18.5 | 20.7 |
| 1.8×15 | 1800 | 15000 | 38 | 1-5 | 18.5 | 26.3 |
| 1.8×18 | 1800 | 18000 | 45.8 | 1-5 | 22 | 31.2 |
| 2×11.8 | 2000 | 11800 | 37 | 1-4 | 18.5 | 28.2 |
| 2×15 | 2000 | 15000 | 47 | 1-4 | 22 | 33.2 |
| 2×18 | 2000 | 18000 | 56.5 | 1-4 | 22 | 39.7 |
| 2×20 | 2000 | 20000 | 62.8 | 1-4 | 22 | 44.9 |
| 2.2×11.8 | 2200 | 11800 | 44.8 | 1-4 | 22 | 30.5 |
| 2.2×15 | 2200 | 15000 | 53 | 1-4 | 30 | 36.2 |
| 2.2×18 | 2200 | 18000 | 68 | 1-4 | 30 | 43.3 |
| 2.2×20 | 2200 | 20000 | 76 | 1-4 | 30 | 48.8 |
| 2.4×15 | 2400 | 15000 | 68 | 1-4 | 30 | 43.7 |
| 2.4×18 | 2400 | 18000 | 81 | 1-4 | 37 | 53 |
| 2.4×20 | 2400 | 20000 | 91 | 1-4 | 37 | 60.5 |
| 2.4×23.6 | 2400 | 23600 | 109 | 1-4 | 45 | 69.8 |
| 2.8×18 | 2800 | 18000 | 111 | 1-3 | 45 | 62 |
| 2.8×20 | 2800 | 20000 | 123 | 1-3 | 55 | 65 |
| 2.8×23.6 | 2800 | 23600 | 148 | 1-3 | 55 | 70 |
| 2.8×28 | 2800 | 28000 | 172 | 1-3 | 75 | 75 |
| 3×20 | 3000 | 20000 | 14 | 1-3 | 55 | 75 |
| 3×23.6 | 3000 | 23600 | 170 | 1-3 | 75 | 85 |
| 3×28 | 3000 | 28000 | 198 | 1-3 | 90 | 91 |
| 3.2×23.6 | 3200 | 23600 | 193 | 1-3 | 90 | 112 |
| 3.2×32 | 3200 | 32000 | 257 | 1-3 | 110 | 129 |
| 3.6×36 | 3600 | 36000 | 366 | 1-3 | 132 | 164 |
| 3.8×36 | 3800 | 36000 | 408 | 1-3 | 160 | 187 |
| 4×36 | 4000 | 36000 | 452 | 1-3 | 160 | 195 |
Product Picture Show:
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2004
Total Annual:
80 million-100 million
Employee Number:
150~200
Ecer Certification：
Active Member
Lipu Heavy Industry Co., Ltd, headquartered in Pudong New District, Shanghai, is composed of Shanghai Lipu Heavy Industry Co., Ltd and Jiangsu Lipu Heavy Industry Co., Ltd., which is a famous company specialized in designing and manufacturing ore dressing ma... Lipu Heavy Industry Co., Ltd, headquartered in Pudong New District, Shanghai, is composed of Shanghai Lipu Heavy Industry Co., Ltd and Jiangsu Lipu Heavy Industry Co., Ltd., which is a famous company specialized in designing and manufacturing ore dressing ma...
Get in touch with us
Leave a Message, we will call you back quickly!