Changzhou Vic-Tech Motor Technology Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 100000/month |
| Delivery Time | 15 days |
| Packaging Details | The foam box is properly placed for the product, and the outside is wrapped with a carton and plastic film, and the bulk product is handled with a plastic pallet for easy transportation and product protection. |
| Motor size | 8mm |
| Step angle | 18 Degree |
| Motor type | stepper motor with lead screw |
| Movement type | Linear （forward and backward ） |
| Lead pitch | M2pitch 0.4mm |
| Driving voltage | 3.3V DC |
| Coil resistance | 20 ohm （can customization） |
| Driving method | Bi-polar 2-2 phase |
| Screw stroke | 14mm |
| thrust | about 80g.cm |
| Brand Name | V-motor |
| Model Number | VSM0806 |
| Certification | RoHS |
| Place of Origin | China |
View Detail Information
Explore similar products
10mm 5VDC Micro Linear Stepper Motor 18ohm For Medical Equipment
8mm Stepper Motor 5V DC VSM0810 18° Step angle For Cameras / Lenses
3.3V Camera Stepper Motor 6mm Miniature Stepping Motor With 4 Pins
Claw Pole High Precision Stepper Motor 8mm Small Diameter OEM / ODM
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100000/month |
| Delivery Time | 15 days | Packaging Details | The foam box is properly placed for the product, and the outside is wrapped with a carton and plastic film, and the bulk product is handled with a plastic pallet for easy transportation and product protection. |
| Motor size | 8mm | Step angle | 18 Degree |
| Motor type | stepper motor with lead screw | Movement type | Linear （forward and backward ） |
| Lead pitch | M2pitch 0.4mm | Driving voltage | 3.3V DC |
| Coil resistance | 20 ohm （can customization） | Driving method | Bi-polar 2-2 phase |
| Screw stroke | 14mm | thrust | about 80g.cm |
| Brand Name | V-motor | Model Number | VSM0806 |
| Certification | RoHS | Place of Origin | China |
| High Light | 8mm Dia Micro Slider Stepper Motor ，Micro Slider Stepper Motor 22mm ，precision stepper motor Copper Slider | ||
VSM0806 is a precision micro stepping motor, the output shaft has a lead screw with a pitch of 0.4mm, and the lead screw and the lead screw supported by the lead screw rotate into thrust.
The basic step angle of the motor is 18 degrees, and the motor runs 20 steps per week, so the displacement resolution can reach 0.02mm, achieving the purpose of precise control.
In terms of actuators, the subdivision drive method is used to satisfy.
Due to its excellent characteristics such as small size, high precision and easy control, this micro stepping motor is widely used in cameras, beauty equipment, medical equipment, vending machines, rapid detection, optical instruments, lenses, precision medical equipment, automatic doors locks, etc.
The input part of the motor is FPC, but it can be changed to the form of connecting wire, PCB, etc. according to customer needs.
Mounting brackets can be replaced according to customer requirements.
1) vending machine
2) Optical instruments
3) Precision medical devices
4) beauty equipment
Other precise control application
| Model No. | VSM0806 |
| Motor type | Linear stepper motor |
| Phase No. | 2 Phases |
| Step angle | 18 Degrees |
| Phase resistance | 20 Ohms/phase |
| Excitation method | 2-2 bipolar drive |
| Rated voltage | 3.3~5V DC |
| Lead screw type | M2*0.4Pitch thread |
| Stroke | 26.4 mm |
| Pull-out thrust | Over 2.0 gf at 500 PPS |
| Max response frequency | Over 1100 PPS |
8mm Micro slider Linear Stepping Motor Screw motor with Bracket Stepper Motor
1. In terms of the outer diameter of the motor, different sizes such as 6mm, 8mm, 10mm, 15mm, 20mm, 25mm can be selected according to the customer's use environment and space strength.
2. Its outlet position can be freely selected within a 360-degree range to meet the installation requirements in the best state. At the same time, the connector can choose lead, PCB, FPC bare pin.
2. The specific stroke is based on customer requirements, and the effective stroke of the motor can be customized within a certain range, mainly considering the diameter and length of the lead screw.
Usually the maximum length of M2 screws can be 50mm, M3 screws can be 100mm, and M4 screws can be 100mm. Can also do 150mm. Small motors use a lead screw with an excessively large diameter, which consumes a lot of power, so comprehensive consideration should be taken when selecting a motor.
4. The material of the slider is generally plastic, which is easy to form and economical.
When there are special use environments and requirements, the slider can also use metal parts.
Of course, the resulting cost will be relatively high, which is determined according to the customer's requirements for the shape and size of the slider.
Packaging diagram:
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
3000000-5000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Changzhou Vic-Tech Motor Technology Co.,Ltd( follows,we only call company) was founded in year 2011, the company mainly develops, manufactures and sells micro stepper motors, micro gearboxes, micro slider motor, micro linear motor and other products The company is located in the Yangtz... Changzhou Vic-Tech Motor Technology Co.,Ltd( follows,we only call company) was founded in year 2011, the company mainly develops, manufactures and sells micro stepper motors, micro gearboxes, micro slider motor, micro linear motor and other products The company is located in the Yangtz...
Get in touch with us
Leave a Message, we will call you back quickly!