Adjustable Thick Roof Sheet Forming Machine , Roller Extruding Tiles Manufacturi

Product Specification

Adjustable Size Roof Sheet Forming Machine , Roller Extruding Tiles Manufacturing Machine

Colorful Roof Tile Machine,Mgo roofing tile forming Machine,mgo roofing tiles making machine

1. Product
Tile-making Machine can produce glass magnesium roof tile with all kinds of waves and heat-preserving layer, which will be used at the roof as the substitute of traditional asbestos tile, color steel tile and cement tile. There is asbestos in the asbestos tile which include carcinogen. 

2. Raw Material and Cost Analysis
The product is formed with crushed crop straw or sawdust and some inorganic chemical materials at one time after roller-extruding. The raw materials of this glass magnesium roof tile are widely and purchased easily for customers. 
Take specification of 1.8mX0.72mX4mm as example, the cost is 7~8 Yuan/piece, and the market price is generally 13~16 Yuan/piece. 

3. Technology Features 
This machine adopts reverse in-phase running technology. 
There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste materials and waste gas during its production processing. The finished board don't need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor. 

4. Equipment Model and Product Specification
According to different production capacity, our equipment has 6 models for large-scale, middle-scale and small-scale. Our all equipment can produce glass magnesium roof tile with same quality and specification but different production capacity. 
Customers can adjust the specification of the glass magnesium roof tile according to different requirements, the standard specification is 1.8mX0.72m, the biggest length is 6m, the thickness is 3mm~6mm generally. In addition, this equipment can produce the glass magnesium roof tile with heat-preserving layer. 

Product features

The product manufactured by this equipment has following features: fireproof, 

waterproof, environmental protection and no toxicity, at the same time it is resistant

 against acid, alkali and aging. This product can be nailed, planed, sawed and sticked. 

In view of that its fireproofing grade is A, so our product will not be combustible 

when the fire is 800-1000°C.At the same time, when our product is fell into the water 

for a week, there are not the following phenomenon such as chalking, deformation 

and warp. In light of there is not glue in the raw materials, so there is not 

formaldehyde and benzene for our boards.Rich color and never fading

Technology features

This machine adopts reverse in-phase running technology.

There is not any requirement about high temperature and high pressure during

 production processing. The board will be

 formed at one time after rollerextruding under the conditions of normal

 temperature and normal pressure. This is a green environmentalprotection project, 

because that there is no waste water, waste materials and waste gas during its

 production processing. The finished board don’t need high temperature drying, 

airdrying and watering, and under the normal temperature, they will dry well indoor.  

Product features:

The Mgo roofing tile manufactured by this equipment has following features: fireproof, waterproof, environmental protection and no toxicity, at the same time it is resistant against acid, alkali and aging. This product can be nailed, planed, sawed and sticked. In view of that its fireproofing grade is A, so our product will not be combustible when the fire is 800-1000°C.At the same time, when our product is fell into the water for a week, there are not the following phenomenon such as chalking, deformation and warp. In light of there is not glue in the raw materials, so there is not formaldehyde and benzene for our boards.

Rich color and never fading

Technology features

This machine adopts reverse in-phase running technology.

There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste materials and waste gas during its production processing. The finished board don’t need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor.

Equipment Model and Product Specification

According to different production, our equipment has 6 models for large-scale, middle-scale and small-scale. Our all equipment can produce board with same quality and specification but different production.

Customers can adjust the specification of the pantile according to different requirements, the standard specification is 1.8mX0.72m, the biggest length is 6 m, the thickness is 3mm~6mm generally. In addition, this equipment can produce the pantile with heat-preserving layer.

Main characteristics

1. PLC computer control

2. no noise, no shake 

3. hydraulic system

4. easy operation

5. maintenance free

Main equipment

1. Automatic bottom glue spraying equipment

 2. Automatic sand blasting room

 3. First drying room

 4. Automatic surface glue spraying equipment

 5. Second drying room equipment component