Intelligent Anti Corrosion Radar Water Level Meter High Accuracy Strong

Product Specification

Description

A radar level meter is a device used to measure the precise position of a liquid or solid in a container. It uses radar technology to send and receive radio waves to determine the distance between the liquid or solid surface and the sensor. Here are some key features and working principles of radar level meters:

Working principle: The radar level meter sends high-frequency radio waves (usually microwaves or light waves) to the surface of a liquid or solid, and then receives the signal reflected back from the surface. By measuring the time difference between the sent and received signals, the height of the liquid level or the height of the solid can be calculated.

The GRD60 series sensor is a radar-type level measuring instrument with an upper limit of measuring distance of 30 meters. It can be used for level measurement in storage tanks, intermediate buffer tanks or process vessels, and outputs 4~20mA analog signals. Very short microwave pulses of very low energy are transmitted and received via an antenna system. Radar waves travel at the speed of light. The operating time can be converted into a level signal via electronics. A special time extension method ensures stable and accurate measurements over extremely short periods of time. Even if the working conditions are relatively complex and there are false echoes, microprocessing technology and debugging software can be used to accurately analyze the echo of the material level.

working principle

The antenna receives the reflected microwave pulse and transmits it to the electronic circuit. The microprocessor processes the signal and identifies the echo generated by the micro-pulse on the surface of the material. Correct echo signal identification is completed by pulse software, and the accuracy can reach millimeter level. The distance D from the material surface is proportional to the pulse time T:
D=C×T/2 where C is the speed of light. Since the distance E of the empty tank is known, the level L is: L=E-D
Set by inputting the empty tank height E (= zero point), the full tank height F (= full scale) and some application parameters. The application parameters will automatically adapt the instrument to the measurement environment. Corresponds to 4~20mA output.

Using non-contact measurement

1. Measuring the level of liquid and solid media

2. Can measure all media with dielectric constant >1.8

3. Measuring range 0~20m (can be extended to 35 meters)

4. Using two-wire loop power supply technology, the supply voltage and output signal are transmitted through a two-core cable

5. 4~20mA output or digital signal output

6. Resolution 1mm

7. Not affected by noise, steam, dust, vacuum and other working conditions

8. Not affected by changes in medium density, viscosity and temperature

9. Process pressure can reach 4MPa

10. Process temperature can reach 250℃

Specification

Packing & Delivery


FAQ
1. Q: What information need to be provided to choose the suitable model?
A: Application field, Nominal pressure ,Medium & medium temperture , Power supply , Output,
Flow range, Accuracy, Connection and other parameters.
2. Q: Are you a trade company or a manufacturer?
A: We are an ISO approved manufacturer specialized in level and flow measuring instruments.
OEM & ODM service are available. Welcome to visit us in China.
3. Q: What is your MOQ?
A: To start our cooperation, sample order is acceptable.
4. Q: What is your delivery date for the Intelligent Mini Micro Turbine Fuel Oil Diesel Flow Meter?
A: The delivery date is about 3-15 working days after receipt of payment.
5. Q: What is your payment terms?
A: We support T/T, PayPal ,Western Union.
For mass production order, it is 30% deposit in advance and 70% balance before shipment.
6. Q: Do you have a warranty for the Flow Meter?
A: Yes, we have the warranty of 12 months.