WUXI JINYE COMPLETE EQUIPMENT CO.,LTD.
| Payment Terms | T/T |
| Supply Ability | 10Sets per year |
| Delivery Time | 120-150Days |
| Name | High Precision Sheet Metal Edge Trimming And Recoiling Lines |
| metal sheet | SPHC, SPCC, SUS, PPGI |
| Metal thickness | 0.1 -1mm, 0.2-2mm, 0.3-3mm |
| Coil width | 1000mm, 1250mm, 1600mm |
| Coil weight | 10T, 15T, 20T |
| Edge trimmer | Through shafts or Two trimmers |
| Scrap winder | Tension winding or loose dropping |
| auto recoiling | Belt wrapper |
| Total power | 250KW, 300KW |
| Trimming speed | 250m/min |
| Brand Name | Jinye |
| Model Number | JYSS-3 x 1300 |
| Place of Origin | Wuxi, China |
View Detail Information
Explore similar products
High Accuracy Sheet Metal Slitting Line With Fast Change Twin Slitters
Exchangable Twin Slitters Precision Slitting Line Advanced Steel Coil Slitting
High Accuracy Sheet Metal Slitting Line With Fast Change Twin Slitters
Stainless Steel High Precision Coil Slitting Line Machine Twin Slitter Optional
Product Specification
| Payment Terms | T/T | Supply Ability | 10Sets per year |
| Delivery Time | 120-150Days | Name | High Precision Sheet Metal Edge Trimming And Recoiling Lines |
| metal sheet | SPHC, SPCC, SUS, PPGI | Metal thickness | 0.1 -1mm, 0.2-2mm, 0.3-3mm |
| Coil width | 1000mm, 1250mm, 1600mm | Coil weight | 10T, 15T, 20T |
| Edge trimmer | Through shafts or Two trimmers | Scrap winder | Tension winding or loose dropping |
| auto recoiling | Belt wrapper | Total power | 250KW, 300KW |
| Trimming speed | 250m/min | Brand Name | Jinye |
| Model Number | JYSS-3 x 1300 | Place of Origin | Wuxi, China |
| High Light | Precision Sheet Slitting Recoiling Lines ，Precision Slitting Line 1250mm ，300KW Precision Slitting Line | ||
High Precision Sheet Metal Edge Trimming And Recoiling Lines
Rewinding (also called as Recoiling) and Trimming are important operations to be carried out after the Cold Rolling of coils. From HR steel coil to get cold rolled steel coil by cold rolling, before go to next galvanizing or coating, need to trim off the irregular strip edge and recoil the CR steel coil.
Parameters:
| Raw material: Cold Rolled Low Carbon Steel Coil Tensile strength min. 290Mpa max 800Mpa Yield strength min. 220Mpa max 570Mpa Coils Dimensions: Inner diameter: 508 /610mm, Outer Diameter: 1000-2000mm Coil weight: max 25T | Strip thickness: 0.2-2.5mm Strip width: 650-1300mm Recoil Mandrel Diameter: 610mm, Coil Outer Diameter of Recoiled Coils: 750-2000mm, Coil weight: max 25T threading speed: 0-15mpm Recoiling speed: 0-200mpm | |||||
The composition of the trimming recoiling line can be the same as slitting line which means slitting and edge trimming on the same production line or specially one uncoiling trimming and rewinding line.
| Coil loading Car: 15- 25T load, hydraulic up-down and walking, floor type or pit type | ||
| CPC Cantilever Uncoiler, hydraulic sliding on base, active uncoiling, hydraulic mandrel expansion | ||
| Coil Head Opener and Shoveling Plate: open coil head and feed it into pinch rolls | ||
| CPC frame and control system: CPC camera to detect the strip central position and automatically control uncoiler to move. | ||
| Deflector Pinch Roller, Front Shear: big deflection roll to change strip direction and pinch it forward, shear cut off coil head or in middle. | ||
| Side Guide: guide steel strip in center of the line before trimming | ||
| Edge Trimmer: through shaft same as slitter or two trimmer heads, with press roll while trimming. | ||
| Anti flutter Rolls: one over two rolls to anti strip body flutter. | ||
| Deburring Rolls: big roll to press and remove burrs. | ||
| Edge Scrap winder: wind up the edge scraps, inspection table to check the strip surface. | ||
| Tension Deflector roller with Apron plate: provide tension and deflect steel strip before recoiling | ||
| EPC frame and control system: to guide strip edge for recoiling neatly, automatically controlled. | ||
| Recoiler: recoil steel strip neatly, motor and gearbox drive, hydraulic pusher | ||
| Belt Wrapper: hold and guide strip head to automatically wind up on recoiler mandrel | ||
| Coil Uncoiling Car: the same structure as coil loading car. |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2000
Total Annual:
4000000-6000000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
We are metal coil sheet processing machine manufacturer and supplier, we dedicate to supply of good quality machines and provision of complete services. We work in the coil processing machine field for over 20years, we design and make each machine customized. From machine parts materials selectio... We are metal coil sheet processing machine manufacturer and supplier, we dedicate to supply of good quality machines and provision of complete services. We work in the coil processing machine field for over 20years, we design and make each machine customized. From machine parts materials selectio...
Get in touch with us
Leave a Message, we will call you back quickly!