100*100MM Fiber Laser Marking Machine Laser Focusing Lens ISO / TUV Certificate

Product Specification

Iso Certificate 100*100Mm Fiber Laser Marking Machine Lens

Working principle

The lens, which can effectively reduce the size of the detector, is called a field mirror, working near the focal plane of the objective lens.

Application

It is mainly used in laser marking machine to homogenization non-uniform illumination on the photosensitive surface of the detector

Usage method

Install it on the laser marking machine

Product feature

The field mirror can be divided into f-theta lens and far center lens. Because the cost and cost of the far heart lens are very high, the F-theta lens is mainly used in the laser marking machine used in industry. Without deformation, the location of the focus depends on the focal length of the lens and the tangent of the deflection angle. The location of the focus depends only on the focal length and the deflection angle, which simplifies the calculation method of the focus location.

FAQ

What are the most common wavelengths of 1. mirrors? How much is the scope of the two 2. - field mirrors of 1064nm and 10600nm at present? 100*100mm, 150*150mm, 300*300mm

Design feature

increase the ability of edge beams to enter the detector;(2) In the same main optical system, the additional field mirror will reduce the detector area. If you use the same detector area, you can expand the field of view, to increase the incident flux;
(3) The modulation plate can be placed out of the image plane to solve the problem that the modulator is nowhere to be placed.

Product features

High precision and high transparency of the field mirror with the optimization of laser beam quality characteristics, on the contrary, if the choice of low-quality field mirror will damage the beam, making the marking quality is not good, fuzzy and so on.

Packaging & Shipping

The transportation of goods shall comply with the relevant provisions of the relevant transportation department (road, rail, sea and air). Shipping, the goods should be configured to balance, ceramsite sand production line should not be emphasis on one or one end, if necessary, take counterweight measures. When loading, pay attention to the contact area between small parts and body parts with small weight. Such as the anvil may be set weight. Set heavy parts should take measures to increase the contact area of the carrier and the body.

Chuke Factory

Chongqing  chuke  intelligent machinery equipment Co., Ltd. was founded in 2006, before our staff has many years of experience in machining, so our company is established in the initial marking needle production business, with the needs of customers, our company gradually realize the business expansion to the technical force so far the company has domestic counterparts in the forefront custom business, reached a new height, either pneumatic marking machine or laser marking machine has been recognized by customers, the marking needle is occupied most of the domestic market market. Our products have been certified by world - known quality systems, including ISO, CE, PDA, TUV and so on. Recently, the company is tackling new technical problems to provide new services to customers with higher requirements. Our products are implemented within the warranty period for free repair and replacement of the shelf life, only charge the cost of fees, inventory at any time to solve customer as pressing danger to address customer needs, for the purpose of. No matter where you are, we can serve you. was founded in 2006, before our staff has many years of experience in machining, so our company is established in the initial marking needle production business, with the needs of customers, our company gradually realize the business expansion to the technical force so far the company has domestic counterparts in the forefront custom business, reached a new height, either pneumatic marking machine or laser marking machine has been recognized by customers, the marking needle is occupied most of the domestic market market. Our products have been certified by world - known quality systems, including ISO, CE, PDA, TUV and so on. Recently, the company is tackling new technical problems to provide new services to customers with higher requirements. Our products are implemented within the warranty period for free repair and replacement of the shelf life, only charge the cost of fees, inventory at any time to solve customer as pressing danger to address customer needs, for the purpose of. No matter where you are, we can serve you.

After-sales Services

Training how to instal the machine parts, training how to use the machine.
.