200kg/h Copper Cable Granulator / Automatic Sheathed Scrap Wire Shredder

Product Specification

200kg/h Wide Application Automatic Sheathed Wire Shredding Machine

TF metal recycling systems(also named waste electric wire and cable recycling equipment)is a kind of machinery used to crush waste copper wire and separate copper and plastic.The copper is one of the environmental type equipment,and this machine is easy to operate,it just needs 1-2 workers to operate,greatly saving your labor cost.

Scrap Copper Cable Recycling Machine Application(raw materials):
Applicable cables: Waste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.
Applicable cable diameter: 0.3-20mm

Indsutry Cable Recycling Machine Specifications: 

Metal Recycling Machine Features:
1. The copper recycling machine is very easy to operate and can be fed at one time. After crushing and processing, the conveyor belt transfers the materials, effectively separating and granulating the plastic and copper from the waste wire, and the purity of the separation is up to 99%. As a result, the purpose of comprehensive utilization is achieved and the recovery efficiency is improved.

2. This cable granulator machine is an advanced waste wire separation device. No dust, no secondary pollution will be generated. In addition, the user can enjoy high recovery economic benefits result from the high-speed copper and plastics recycling process.
3. The whole process of crushing, feeding, dust eliminating and separating is carried out automatically.

4. With the advanced dust collection device and dry separation process, the separated products that can be sold directly.

Scrap Copper Cable Recycling Machine Working principle:

1. Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2. The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3. The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4. All the units are installed on the underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.