Anping Dixun Wire Mesh Products Co., Ltd
| Supply Ability | 15 sets per month |
| Delivery Time | 30 working days |
| Packaging Details | Machine in container, spare parts in wooden cases |
| Product name | Cold Rolling Ribbed Steel Bar Machine / Wire Drawing Machine |
| Inlet wire diameter | Maximum 12mm |
| Outlet wire diameter | Minimum 4mm |
| Main motor | 75kw |
| Winding wire motor | 11kw |
| Coil wire weight | 2 tons |
| Production speed | 120m per min |
| Mode of adjustment | speed inverter |
| Installation length | 30m |
| Total weight | 6.8 tons |
| Mode of lubrication | Wire drawing powder |
| Labor cost | Two persons |
| Brand Name | DIXUN |
| Model Number | DX-3000T |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
180meters Per Min Steel Wire Drawing Machine , Vertical Wire Drawing Machine
Production Speed 15m/S Steel Wire Drawing Machine Motor 22KW
Motor 15kw 6.5mm Steel Wire Drawing Machine 5 Drums Pulley Type
Adjustable Speed Wire Drawing Equipment Capacity 180m/Min Outlet Wire Diameter 2
Product Specification
| Supply Ability | 15 sets per month | Delivery Time | 30 working days |
| Packaging Details | Machine in container, spare parts in wooden cases | Product name | Cold Rolling Ribbed Steel Bar Machine / Wire Drawing Machine |
| Inlet wire diameter | Maximum 12mm | Outlet wire diameter | Minimum 4mm |
| Main motor | 75kw | Winding wire motor | 11kw |
| Coil wire weight | 2 tons | Production speed | 120m per min |
| Mode of adjustment | speed inverter | Installation length | 30m |
| Total weight | 6.8 tons | Mode of lubrication | Wire drawing powder |
| Labor cost | Two persons | Brand Name | DIXUN |
| Model Number | DX-3000T | Certification | CE |
| Place of Origin | China | ||
| High Light | Steel Wire Drawing Machine 75kw ，Steel Bar Machine 75kw ，Cold Rolling Steel Bar Machine | ||
Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine
Introduction of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
The cold rolling steel bar ribbed machine is to roll surface of steel round bar to form three crescent sides.
Raw material is hot-rolled low carbon steel round bar.
Main Features of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
1. Gearbox Reducer, large torque, low noise, durable.
2. Advanced frequency inverter technology, can save 40-60% of electricity consumption.
3. The line speed can be up to 90 meters per minute, improve production efficiency.
4. Technology applied on the vibration aging process, eliminating the pre-stressing.
Rolling mill and speed:
If the reduced diameter is less then 1mm, only need to use single rolling mill-6pcs rolling wheels. (For example, inlet round wire 8.5-9mm, outlet ribbed wire 8mm.) But the wire reducing and ribbing are doing on one rolling mill machine, the rolling speed is max.90m/min.
If the reduced diameter is more than 1mm, less than 2mm, need to use two rolling mills-12pcs rolling wheels. (For example, inlet round wire 9-10mm, outlet ribbed wire 8mm.) The wire reducing and ribbing are doing at 2 rolling mill machines, the rolling speed can be up to max.120m/min.
Process:
Raw material–Spool off–Sheller–Dry Lubrication–NO.1 rolling mill machine for reducing–Coiling.
Technical Parameters of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
| Model | 30000T |
| Raw material inner diameter | 800 mm |
| Raw material outside diameter | 1,200 mm |
| Raw material height | 1,700 mm |
| Raw material | Max 2,000 kg |
| Control technical | Touch screen + PLC+ Encoder |
| Raw material diameter | Φ5.5-14mm |
| Finished ribbed bar diameter | Φ5-12mm |
| Drawing speed | 5-11mm, Max.180M/min 12mm, Max.150M/min |
| Ribs bar measurement length | 1-12m |
| Speed adjusting way | Frequency inverter |
| Cut off error | ±5mm |
| Cutting way | Servo cutting |
| Main motor | 75kw |
| Servo cutting rate | 18KW |
| Ribs rolling mill material | Tungsten carbide |
| rolling mill diameter | Ф210mm |
| Cooling way | Water cooling |
| Butt welding machine | 1 unit |
| Air compressor | 0.18 m³/min @ 8 bar |
| Rolling press times | 2+1 |
| Cutting length | 1-6M/12M |
| Rolling mill adjusting way | Motor give pressure |
| Installation length | 40*4M |
| Power consumption: | 10kw per ton |
| Manpower | 2 persons |
| Installation & training time | 10-15 days |
Applicatios of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
This production line is mainly to make 5-10mm reinforcing steel bars with three-side crescent shape ribs. The finished product is widely used in highway, road, city planning and construction works.
Photos of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2010
Total Annual:
400-500
Employee Number:
>100
Ecer Certification：
Verified Supplier
Anping Dixun Wire Mesh Products Co., Ltd. is located in Anping county, which is the famous Wire Mesh hometown of China. We are professional manufacturer who make various types wire mesh machines in China. We have advanced technology, modern equipment, complete quality control system and strong... Anping Dixun Wire Mesh Products Co., Ltd. is located in Anping county, which is the famous Wire Mesh hometown of China. We are professional manufacturer who make various types wire mesh machines in China. We have advanced technology, modern equipment, complete quality control system and strong...
Get in touch with us
Leave a Message, we will call you back quickly!